GALE ALLOY CORP
38 BURCH AVE, AMITYVILLE, NY 11701
Having inspection records is common for businesses in regulated industries. Data and methodology
Inspection records
Jan 18, 1985#1003243Jan 18, 1985Planned (H) · No Inspection scope, Safety#1003243$00 viol.0 violations$0 in penalties
Inspection #1003243
Dates
- Opened
- Jan 18, 1985
- Closing Conference Date
- Jan 18, 1985
- Closed
- Jan 21, 1985
Inspection
- Advance Notice
- No
- Owner Type
- Private
- Union Status
- No
- Number of Employees
- 7
Violations and Penalties
- Total Violations
- 0
- Initial Penalties
- $0
- Penalties on Record
- $0
- Site Address
- 38 Burch Ave, Amityville, NY 11701
- Industry
- Not classified in OSHA's inspection record.
Planned Inspection: This inspection record is categorized as a planned inspection in the DOL OSHA enforcement data. Planned inspections are part of OSHA's scheduled enforcement activity rather than being opened directly from a complaint or reported incident at that worksite.
May 21, 1979#18752584May 21, 1979Planned (H) · No Inspection scope, Safety#18752584$00 viol.0 violations$0 in penalties
Inspection #18752584
Dates
- Opened
- May 21, 1979
- Closing Conference Date
- Not recorded
- Closed
- Apr 26, 1986
Inspection
- Advance Notice
- Not recorded
- Owner Type
- Not recorded
- Union Status
- Not recorded
- Number of Employees
- Not recorded
Violations and Penalties
- Total Violations
- 0
- Initial Penalties
- $0
- Penalties on Record
- $0
- Site Address
- , Amityville, NY 00000
- Industry
- Not classified in OSHA's inspection record.
Planned Inspection: This inspection record is categorized as a planned inspection in the DOL OSHA enforcement data. Planned inspections are part of OSHA's scheduled enforcement activity rather than being opened directly from a complaint or reported incident at that worksite.
May 28, 1975#11532140May 28, 1975Follow-Up (F) · Complete scope, Safety#11532140$00 viol.0 violations$0 in penalties
Inspection #11532140
Dates
- Opened
- May 28, 1975
- Closing Conference Date
- May 28, 1975
- Closed
- Mar 10, 1984
Inspection
- Advance Notice
- Not recorded
- Owner Type
- Not recorded
- Union Status
- No
- Number of Employees
- 12
Violations and Penalties
- Total Violations
- 0
- Initial Penalties
- $0
- Penalties on Record
- $0
- Site Address
- 38 Birch Avenue, Amityville, NY 11701
- Industry
- Not classified in OSHA's inspection record.
Follow-Up Inspection: This inspection record is categorized as a follow-up inspection in the DOL OSHA enforcement data. Follow-up inspections are used by OSHA after earlier enforcement activity and can be used to check later compliance status.
Apr 3, 1975#11531738Apr 3, 1975Planned (H) · Complete scope, Safety#11531738$12511 viol.11 violations$125 in penalties
Inspection #11531738
Dates
- Opened
- Apr 3, 1975
- Closing Conference Date
- Apr 3, 1975
- Closed
- Dec 31, 1975
Inspection
- Advance Notice
- Not recorded
- Owner Type
- Not recorded
- Union Status
- No
- Number of Employees
- 12
Violations and Penalties
- Total Violations
- 11
- Violation Types
- 11 other-than-serious
- Initial Penalties
- $125
- Penalties on Record
- $125
- Site Address
- 38 Birch Ave, Amityville, NY 11701
- Industry
- Not classified in OSHA's inspection record.
Planned Inspection: This inspection record is categorized as a planned inspection in the DOL OSHA enforcement data. Planned inspections are part of OSHA's scheduled enforcement activity rather than being opened directly from a complaint or reported incident at that worksite.
Violations
Violation list (11 of 11 shown)
| Citation | Standard | Type | Instances | Exposed | Initial | Current | Abatement | Contest | Final Order |
|---|---|---|---|---|---|---|---|---|---|
| 01001 | 1910.219 Mechanical Power-Transmission Apparatus OSHA citation code: 19100219 D01 | Other | 3 | - | $30 | $30 | May 26, 1975 | - | - |
| 01002 | 1910.309 OSHA citation code: 19100309 A 025042 | Other | 8 | - | $35 | $35 | Apr 11, 1975 | - | - |
| 01003 | 1910.212 General Requirements for All Machines (Machine Guarding) OSHA citation code: 19100212 A05 | Other | 1 | - | $0 | $0 | May 26, 1975 | - | - |
| 01004 | 1910.215 Abrasive Wheel Machinery OSHA citation code: 19100215 A04 | Other | 2 | - | $0 | $0 | May 26, 1975 | - | - |
| 01005 | 1910.157 Portable Fire Extinguishers OSHA citation code: 19100157 D03 I | Other | 1 | - | $0 | $0 | May 26, 1975 | - | - |
| 01006 | 1910.212 General Requirements for All Machines (Machine Guarding) OSHA citation code: 19100212 A01 | Other | 1 | - | $30 | $30 | May 26, 1975 | - | - |
| 01007 | 1910.309 OSHA citation code: 19100309 A 025051 | Other | 1 | - | $0 | $0 | Apr 11, 1975 | - | - |
| 01008 | 1910.36 Design and Construction Requirements for Exit Routes OSHA citation code: 19100036 D01 | Other | 1 | - | $30 | $30 | Apr 11, 1975 | - | - |
| 01009 | 1910.36 Design and Construction Requirements for Exit Routes OSHA citation code: 19100036 B04 | Other | 1 | - | $0 | $0 | Apr 11, 1975 | - | - |
| 01010 | 1904.2 Partial Exemption for Establishments in Certain Industries OSHA citation code: 19040002 A | Other | 1 | - | $0 | $0 | May 26, 1975 | - | - |
| 01011 | 1904.5 Determination of Work-Relatedness OSHA citation code: 19040005 A | Other | 1 | - | $0 | $0 | May 26, 1975 | - | - |
Failure to Abate Penalties2 citations, $100 in FTA penalties on record
OSHA's enforcement record shows Failure to Abate (FTA) activity recorded against 2 citations issued in this inspection. An FTA penalty is assessed during a follow-up inspection when OSHA's records indicate a previously cited hazard was not corrected by the abatement date. Each row below shows the FTA fields published on the original citation record: the follow-up inspection number, the FTA issuance date, the FTA penalty amount, and any FTA contest or final order date on record.
| Citation | FTA Inspection | FTA Issuance | FTA Penalty | FTA Contest | FTA Final Order |
|---|---|---|---|---|---|
| 01010 | - | May 26, 1975 | $50 | - | - |
| 01011 | - | May 26, 1975 | $50 | - | - |
Penalty amounts may differ from final amounts after settlement or judicial review. How to read these records
About these records
A company page groups inspections with the same normalized employer name, city and state; it is not a legal-entity identifier (how pages are grouped).
This page displays public OSHA enforcement data. Status text follows the DOL inspection record first and may include citation-level context when the inspection feed and citation records are out of sync. Penalty amounts shown reflect the latest penalty amounts on record in the DOL database and may differ from initial assessments or final amounts. This is not an official OSHA resource.
OSHA's public enforcement data does not publish a "guilty" or "not guilty" field for inspections. The closest outcome fields available are the citation counts, penalty amounts, contest dates, final-order dates, and the inspection close date shown on this page. How to interpret these status fields. How initial and current penalties are recorded.
OSHA may publish multiple citation rows in the same inspection with the same standard and penalty fields. Separate rows can still differ in OSHA metadata such as citation identifier, recorded instance count, exposed workers, or gravity value. Contest and Final Order columns show citation-level dates from OSHA's enforcement record. A dash means OSHA's record does not currently show that activity for the citation.
Source: U.S. Department of Labor OSHA enforcement data, violations table fields fta_insp_nr, fta_issuance_date, fta_penalty, fta_contest_date, fta_final_order_date. The FTA follow-up inspection is linked via fta_insp_nr to the inspection activity number (exact government key). When the follow-up inspection is not currently on record in SafetyRecord, the inspection number is shown without a link.
Understanding These Penalties
The maximum penalty for a serious violation in 2025 is $16,550 per violation. For willful violations, the range is $11,823 to $165,514. The current penalty column shows the latest amount on record in OSHA's database for each citation. When the current penalty differs from the initial penalty, OSHA's records show that the amount changed during the enforcement process, but this page does not determine the specific reason for each change. Penalty amounts are set by OSHA and adjusted annually for inflation.
4 inspections, 1975 to 1985. Each row is one inspection; point at or tap a row for its dates and totals.
Source: DOL OSHA enforcement data (inspections and violations), linked via activity_nr (exact government key).
Penalty changes: Amounts shown reflect what OSHA's enforcement record publishes. The reason for any change is not stated unless OSHA's record explicitly says so.
Short cases: When a case closed soon after it opened, the closed marker is drawn slightly to the right so both markers stay visible. Each row's card shows the exact dates.