Question 1

How many OSHA inspections has ROYAL CREATIONS, INC. had?

Accepted Answer

ROYAL CREATIONS, INC. has been inspected 10 times by OSHA between Sep 24, 1976 and Apr 12, 1994, with 55 violations and $16,380 in penalties on record.

Question 2

What are the most common OSHA violations in metal manufacturing?

Accepted Answer

Metal fabrication and machinery manufacturing operations are most frequently cited for machine guarding deficiencies (29 CFR 1910.212), inadequate lockout/tagout procedures for energy control (29 CFR 1910.147), electrical hazards (29 CFR 1910.303), and hearing conservation violations (29 CFR 1910.95). Welding operations face additional citations under 29 CFR 1910.252 for ventilation and fire prevention.

Question 3

Does Georgia have its own OSHA program?

Accepted Answer

Georgia operates under federal OSHA jurisdiction for private-sector employers. Federal OSHA conducts all workplace safety inspections and enforcement in Georgia. The state does not have its own occupational safety and health plan for private-sector workers. Georgia employers must comply with federal OSHA standards and regulations.

Question 4

What is a Serious violation under OSHA?

Accepted Answer

A Serious violation is cited when there is a substantial probability that death or serious physical harm could result from a hazard, and the employer knew or should have known about the condition. Serious violations carry mandatory penalties. For 2025, the maximum penalty for a serious violation is $16,550 per violation. The actual amount may be adjusted based on factors including employer size, good faith efforts, and violation history.

Question 5

What is an Other-than-Serious violation?

Accepted Answer

An Other-than-Serious violation is cited when a hazard exists that could cause injury or illness but would not likely result in death or serious physical harm. These violations carry a maximum penalty of $16,550 per violation for 2025, though penalties are discretionary and may be reduced to zero. Common examples include recordkeeping deficiencies and posting requirements.

Question 6

How does OSHA calculate penalty amounts?

Accepted Answer

OSHA sets initial penalty amounts based on the gravity of the violation (severity and probability of injury). Penalties are then adjusted based on three factors: employer size (smaller employers may receive reductions), good faith (employers with effective safety programs), and violation history (employers with no recent prior violations). Penalties may be further reduced through informal settlement conferences between the employer and the OSHA Area Director.

Standard	Citations	Penalties
1910.219Mechanical Power-Transmission Apparatus	8	$2,555
1910.213Woodworking Machinery Requirements	6	$2,455
1910.215Abrasive Wheel Machinery	5	$700
1910.1200Hazard Communication	5	$1,400
1910.22Walking-Working Surfaces - General Requirements	3	$805
1910.37Maintenance, Safeguards, and Operational Features for Exit Routes	3	$1,750
1910.212General Requirements for All Machines (Machine Guarding)	3	$1,225
1910.147Control of Hazardous Energy (Lockout/Tagout)	3	$1,750
1904.2Partial Exemption for Establishments in Certain Industries	2	$0
1910.106Flammable Liquids	2	$0

ID	Opened	Type	Scope	Viol.	Penalties
#108961087	Apr 12, 1994	Planned	Complete	26	$14,000
#102831773	Mar 16, 1989	Complaint	Complete	2	$280
#102827748	Sep 20, 1988	Follow-Up	Partial	0	$0
#17766304