Question 1

How many OSHA inspections has SAUNDERS MANUFACTURING had?

Accepted Answer

SAUNDERS MANUFACTURING has been inspected 9 times by OSHA between Jul 17, 1991 and Dec 3, 1991, with 49 violations and $10,000 in penalties on record.

Question 2

How does OSHA enforcement work in Kansas?

Accepted Answer

Kansas operates under federal OSHA jurisdiction. The federal Occupational Safety and Health Administration handles all workplace safety inspections and enforcement for private-sector employers in Kansas.

Question 3

What is a Serious violation under OSHA?

Accepted Answer

A Serious violation is cited when there is a substantial probability that death or serious physical harm could result from a hazard, and the employer knew or should have known about the condition. Serious violations carry mandatory penalties. For 2025, the maximum penalty for a serious violation is $16,550 per violation. The actual amount may be adjusted based on factors including employer size, good faith efforts, and violation history.

Question 4

What is an Other-than-Serious violation?

Accepted Answer

An Other-than-Serious violation is cited when a hazard exists that could cause injury or illness but would not likely result in death or serious physical harm. These violations carry a maximum penalty of $16,550 per violation for 2025, though penalties are discretionary and may be reduced to zero. Common examples include recordkeeping deficiencies and posting requirements.

Question 5

How does OSHA calculate penalty amounts?

Accepted Answer

OSHA sets initial penalty amounts based on the gravity of the violation (severity and probability of injury). Penalties are then adjusted based on three factors: employer size (smaller employers may receive reductions), good faith (employers with effective safety programs), and violation history (employers with no recent prior violations). Penalties may be further reduced through informal settlement conferences between the employer and the OSHA Area Director.

Question 6

What triggers an OSHA follow-up inspection?

Accepted Answer

OSHA conducts follow-up inspections to verify that previously cited hazards have been corrected by the abatement deadline. Follow-ups may also verify that new safety programs or procedures required by earlier citations are being properly implemented. If the employer has not corrected the cited conditions, OSHA can issue a Failure to Abate notice with additional daily penalties.

Standard	Citations	Penalties
1910.1200Hazard Communication	14	$2,950
1910.219Mechanical Power-Transmission Apparatus	8	$1,800
1910.303Electrical - General Requirements	4	$1,100
1910.212General Requirements for All Machines (Machine Guarding)	3	$600
1910.147Control of Hazardous Energy (Lockout/Tagout)	2	$750
1904.2Partial Exemption for Establishments in Certain Industries	2	$100
1910.151Medical Services and First Aid	2	$0
1904.4Recording Criteria	2	$100
1910.95Occupational Noise Exposure	2	$1,000
1910.134Respiratory Protection	2	$150

ID	Opened	Type	Scope	Viol.	Penalties
#113816508	Dec 3, 1991	Follow-Up	Partial	0	$0
#113816516	Dec 3, 1991	Follow-Up	Partial	0	$0
#113816334	Dec 3, 1991	Follow-Up	Partial	0	$0
#113816045