Skip to content
SafetyRecord logoSafetyRecord

Inspection #103337697

Closed

This page displays public OSHA enforcement data. Status text follows the DOL inspection record first and may include citation-level context when the inspection feed and citation records are out of sync. Penalty amounts shown reflect the latest penalty amounts on record in the DOL database and may differ from initial assessments or final amounts. This is not an official OSHA resource.

The Occupational Safety and Health Administration (OSHA) conducted a accident inspection of ACE IRON & METAL CO. at 2515 Groveport Road, Columbus, OH 43207 on May 25, 1994. The inspection scope was complete. The case was closed on Jan 11, 2000.

OSHA documented 40 violations (33 serious, 7 other-than-serious) with total penalties on record of $90,000. 1 incident investigation summary is associated with this inspection. This inspection is linked to 1 referral, 1 accident report in OSHA records.

This employer has 12 other OSHA inspections on record at this establishment.

Inspection Details

Inspection Number
103337697
Type
Accident (A)
Scope
Complete
Opened
May 25, 1994
Closed
Jan 11, 2000
Contested
Dec 5, 1994
Final Order
Feb 21, 1996
Total Violations
40
Penalties on Record
$90,000
Initial Penalties
$368,000
Related Activity
1 referral, 1 accident
Accident Inspection: This inspection record is categorized as an accident inspection in the U.S. Department of Labor OSHA enforcement data. Employers must report work-related fatalities within 8 hours, and work-related inpatient hospitalizations, amputations, or losses of an eye within 24 hours. An accident-related inspection does not by itself determine fault.

Establishment

Address
2515 Groveport Road, Columbus, OH 43207
Industry
423930 Recyclable Material Merchant Wholesalers

Other Inspections of This Employer12 on record

Other OSHA inspections of the same establishment. Linked via establishment ID (exact government key).

Incident Investigation Summaries

Incident investigation summaries linked to this inspection through OSHA's accident and injury enforcement data. These summaries describe the reported incident. The enforcement outcome for the linked inspection appears immediately below.

FatalityMay 25, 1994

Employee killed in oxygen regulator explosion

Injury: Cut/LacerationBody part: Head

Source: U.S. Department of Labor OSHA incident investigation data (`osha_accident` + `osha_accident_injury`). Linked via `rel_insp_nr` to the inspection activity number (exact government key).

Enforcement Outcome

OSHA's public enforcement data does not publish a "guilty" or "not guilty" field for inspections. The closest outcome fields available are the citation counts, penalty amounts, contest dates, final-order dates, and the inspection close date shown on this page.

Status on Record
Closed

Inspection closed Jan 11, 2000.

Citations on Record
40

33 serious, 7 other-than-serious.

Initial Penalties
$368,000

Citation amounts as first recorded in OSHA's penalty fields.

Current Penalties
$90,000

Latest published amounts after changes in the enforcement process.

Citation contest activity appears on Dec 5, 1994. Final orders are recorded through Feb 21, 1996. Penalty changes shown on this page reflect the latest amounts published in OSHA's enforcement data.

Violations

OSHA may publish multiple citation rows in the same inspection with the same standard and penalty fields. Separate rows can still differ in OSHA metadata such as citation identifier, recorded instance count, exposed workers, or gravity value. Contest and Final Order columns show citation-level dates from OSHA's enforcement record. A dash means OSHA's record does not currently show that activity for the citation.

CitationStandardTypeInitialCurrentAbatementContestFinal Order
010011910.37
Maintenance, Safeguards, and Operational Features for Exit Routes
OSHA citation code: 19100037 F01
Serious$7,000$4,000Mar 31, 1996Dec 5, 1994Feb 21, 1996
010021910.37
Maintenance, Safeguards, and Operational Features for Exit Routes
OSHA citation code: 19100037 Q01
Serious$7,000$0Mar 31, 1996Dec 5, 1994Feb 21, 1996
010031910.38
Emergency Action Plans
OSHA citation code: 19100038 A01
Serious$7,000$4,000Mar 31, 1996Dec 5, 1994Feb 21, 1996
010041910.38
Emergency Action Plans
OSHA citation code: 19100038 B01
Serious$7,000$0Mar 31, 1996Dec 5, 1994Feb 21, 1996
010051910.110
Storage and Handling of Liquefied Petroleum Gases
OSHA citation code: 19100110 C04 II
Serious$2,500$2,000Mar 31, 1996Dec 5, 1994Feb 21, 1996
010061910.132
Personal Protective Equipment - General Requirements
OSHA citation code: 19100132 A
Serious$3,500$5,000Mar 31, 1996Dec 5, 1994Feb 21, 1996
01007A1910.177
Servicing Multi-Piece and Single Piece Rim Wheels
OSHA citation code: 19100177 C01 I
Serious$7,000$5,000Mar 31, 1996Dec 5, 1994Feb 21, 1996
01007B1910.177
Servicing Multi-Piece and Single Piece Rim Wheels
OSHA citation code: 19100177 F
Serious$0$0Mar 31, 1996Dec 5, 1994Feb 21, 1996
010081910.180
Crawler Locomotive and Truck Cranes
OSHA citation code: 19100180 C02
Serious$2,500$3,000Mar 31, 1996Dec 5, 1994Feb 21, 1996
010091910.180
Crawler Locomotive and Truck Cranes
OSHA citation code: 19100180 D04
Serious$5,000$3,000Mar 31, 1996Dec 5, 1994Feb 21, 1996
010101910.180
Crawler Locomotive and Truck Cranes
OSHA citation code: 19100180 D06
Serious$5,000$0Mar 31, 1996Dec 5, 1994Feb 21, 1996
010111910.180
Crawler Locomotive and Truck Cranes
OSHA citation code: 19100180 E02 I
Serious$7,000$0Mar 31, 1996Dec 5, 1994Feb 21, 1996
010121910.180
Crawler Locomotive and Truck Cranes
OSHA citation code: 19100180 I05 I
Serious$2,000$0Mar 31, 1996Dec 5, 1994Feb 21, 1996
010131910.212
General Requirements for All Machines (Machine Guarding)
OSHA citation code: 19100212 A03 II
Serious$7,000$5,000Mar 31, 1996Dec 5, 1994Feb 21, 1996
01014A1910.219
Mechanical Power-Transmission Apparatus
OSHA citation code: 19100219 B01
Serious$7,000$4,000Mar 31, 1996Dec 5, 1994Feb 21, 1996
01014B1910.219
Mechanical Power-Transmission Apparatus
OSHA citation code: 19100219 D01
Serious$0$0Mar 31, 1996Dec 5, 1994Feb 21, 1996
010151910.219
Mechanical Power-Transmission Apparatus
OSHA citation code: 19100219 F01
Serious$2,500$0Mar 31, 1996Dec 5, 1994Feb 21, 1996
01016A1910.252
Welding, Cutting, and Brazing - General Requirements
OSHA citation code: 19100252 A02 XIVA
Serious$7,000$5,000Mar 31, 1996Dec 5, 1994Feb 21, 1996
01016B1910.253
Oxygen-Fuel Gas Welding and Cutting
OSHA citation code: 19100253 A04
Serious$0$0Mar 31, 1996Dec 5, 1994Feb 21, 1996
01016C1910.1200
Hazard Communication
OSHA citation code: 19101200 H
Serious$0$2,000Mar 31, 1996Dec 5, 1994Feb 21, 1996
010171910.252
Welding, Cutting, and Brazing - General Requirements
OSHA citation code: 19100252 A02 XIIIC
Serious$7,000$5,000Mar 31, 1996Dec 5, 1994Feb 21, 1996
010181910.253
Oxygen-Fuel Gas Welding and Cutting
OSHA citation code: 19100253 B04 I
Serious$2,500$0Mar 31, 1996Dec 5, 1994Feb 21, 1996
010191910.253
Oxygen-Fuel Gas Welding and Cutting
OSHA citation code: 19100253 B05 I
Serious$7,000$7,000Mar 31, 1996Dec 5, 1994Feb 21, 1996
010201910.253
Oxygen-Fuel Gas Welding and Cutting
OSHA citation code: 19100253 E01
Serious$7,000$0Mar 31, 1996Dec 5, 1994Feb 21, 1996
010211910.253
Oxygen-Fuel Gas Welding and Cutting
OSHA citation code: 19100253 E06 I
Serious$7,000$3,000Mar 31, 1996Dec 5, 1994Feb 21, 1996
010221910.253
Oxygen-Fuel Gas Welding and Cutting
OSHA citation code: 19100253 E06 I
Serious$7,000$0Mar 31, 1996Dec 5, 1994Feb 21, 1996
010231910.305
Electrical - Wiring Methods, Components, and Equipment
OSHA citation code: 19100305 A02 IIIG
Serious$2,500$2,000Mar 31, 1996Dec 5, 1994Feb 21, 1996
010241910.1200
Hazard Communication
OSHA citation code: 19101200 E01
Serious$2,500$2,000Mar 31, 1996Dec 5, 1994Feb 21, 1996
010251910.1200
Hazard Communication
OSHA citation code: 19101200 G01
Serious$2,500$0Mar 31, 1996Dec 5, 1994Feb 21, 1996
020011910.177
Servicing Multi-Piece and Single Piece Rim Wheels
OSHA citation code: 19100177 D01
Serious$70,000$7,000Mar 31, 1996Dec 5, 1994Feb 21, 1996
020021910.178
Powered Industrial Trucks
OSHA citation code: 19100178 P01
Serious$70,000$7,000Mar 31, 1996Dec 5, 1994Feb 21, 1996
020031910.252
Welding, Cutting, and Brazing - General Requirements
OSHA citation code: 19100252 B02 IB
Serious$25,000$7,000Mar 31, 1996Dec 5, 1994Feb 21, 1996
020041910.253
Oxygen-Fuel Gas Welding and Cutting
OSHA citation code: 19100253 B02 IV
Serious$70,000$7,000Mar 31, 1996Dec 5, 1994Feb 21, 1996
030011903.2
Posting of Notices; Availability of the Act, Regulations and Applicable Standards
OSHA citation code: 19030002 A01
Other$1,000$500Mar 31, 1996Dec 5, 1994Feb 21, 1996
030021904.2
Partial Exemption for Establishments in Certain Industries
OSHA citation code: 19040002 A
Other$1,000$500Mar 31, 1996Dec 5, 1994Feb 21, 1996
030031910.141
Sanitation
OSHA citation code: 19100141 C01 I
Other$0$0Mar 31, 1996Dec 5, 1994Feb 21, 1996
030041910.305
Electrical - Wiring Methods, Components, and Equipment
OSHA citation code: 19100305 A01 I
Other$0$0Mar 31, 1996Dec 5, 1994Feb 21, 1996
030051910.305
Electrical - Wiring Methods, Components, and Equipment
OSHA citation code: 19100305 G01 IIIA
Other$0$0Mar 31, 1996Dec 5, 1994Feb 21, 1996
030061910.1200
Hazard Communication
OSHA citation code: 19101200 F05 I
Other$0$0Mar 31, 1996Dec 5, 1994Feb 21, 1996
030071910.1200
Hazard Communication
OSHA citation code: 19101200 F05 II
Other$0$0Mar 31, 1996Dec 5, 1994Feb 21, 1996

Failure to Abate Penalties1 citation, $6,000 in FTA penalties on record

OSHA's enforcement record shows Failure to Abate (FTA) activity recorded against 1 citationissued in this inspection. An FTA penalty is assessed during a follow-up inspection when OSHA's records indicate a previously cited hazard was not corrected by the abatement date. Each row below shows the FTA fields published on the original citation record: the follow-up inspection number, the FTA issuance date, the FTA penalty amount, and any FTA contest or final order date on record.

CitationFTA InspectionFTA IssuanceFTA PenaltyFTA ContestFTA Final Order
01004--$6,000--

Source: U.S. Department of Labor OSHA enforcement data, violations table fields fta_insp_nr, fta_issuance_date, fta_penalty, fta_contest_date, fta_final_order_date. The FTA follow-up inspection is linked via fta_insp_nr to the inspection activity number (exact government key). When the follow-up inspection is not currently on record in SafetyRecord, the inspection number is shown without a link.

Understanding These Penalties

The maximum penalty for a serious violation in 2025 is $16,550 per violation. For willful violations, the range is $11,823 to $165,514. The current penalty column shows the latest amount on record in OSHA's database for each citation. When the current penalty differs from the initial penalty, OSHA's records show that the amount changed during the enforcement process, but this page does not determine the specific reason for each change. Penalty amounts are set by OSHA and adjusted annually for inflation.

Data Source and Methodology

Data synced daily

Data on this page comes from the U.S. Department of Labor's OSHA enforcement database, accessed via the DOL public data API. Records are updated daily. We strive for accuracy, but errors in data processing or establishment grouping are possible. Penalty amounts reflect the latest penalty amounts on record in the DOL database and may differ from initial assessments or final amounts after informal conference, settlement, or judicial review. Company pages group inspection records by normalized employer name, city, and state as reported in OSHA records. That grouping is deterministic and non-fuzzy, but it is not a universal legal-entity identifier. On inspection pages, the status display follows the DOL inspection record first. If the DOL inspection feed includes a close date, we show the inspection as closed. If the inspection feed has no close date but all citation records tied to that inspection show a final order date, we label the page "Final Order Recorded" and disclose the citation dates instead of inferring a close date. Chemical exposure sampling data and OSHA Permissible Exposure Limits (PELs) are sourced from the OSHA Occupational Chemical Database, matched via IMIS analyte codes. If you believe any record is inaccurate, please report it and we will investigate. This product uses the DOL Data API but is not endorsed or certified by the DOL. For official and authoritative records, visit osha.gov.