NY STATE OFFICE BUILDING - NYS OGS
VETERANS HIGHWAY, HAUPPAUGE, NY 11787
Having inspection records is common for businesses in regulated industries. Data and methodology
Inspection records
May 12, 1987#104845920May 12, 1987Accident (A) · Partial scope, Safety#104845920$00 viol.0 violations$0 in penalties
Inspection #104845920
Dates
- Opened
- May 12, 1987
- Closing Conference Date
- May 12, 1987
- Closed
- May 12, 1987
Inspection
- Advance Notice
- No
- Owner Type
- State government
- Union Status
- Yes
- Number of Employees
- 1,050
Violations and Penalties
- Total Violations
- 0
- Initial Penalties
- $0
- Penalties on Record
- $0
- Site Address
- Veterans Highway, Hauppauge, NY 11787
- Industry
- Not classified in OSHA's inspection record.
Accident Inspection: This inspection record is categorized as an accident inspection in the U.S. Department of Labor OSHA enforcement data. Employers must report work-related fatalities within 8 hours, and work-related inpatient hospitalizations, amputations, or losses of an eye within 24 hours. An accident-related inspection does not by itself determine fault.
May 7, 1987#104845813May 7, 1987Planned (H) · Complete scope, Safety#104845813$021 viol.21 violations$0 in penalties
Inspection #104845813
Dates
- Opened
- May 7, 1987
- Closing Conference Date
- May 13, 1987
- Closed
- Dec 31, 1999
Inspection
- Advance Notice
- No
- Owner Type
- State government
- Union Status
- Yes
- Number of Employees
- 1,050
Violations and Penalties
- Total Violations
- 21
- Violation Types
- 18 serious, 3 other-than-serious
- Initial Penalties
- $0
- Penalties on Record
- $0
- Site Address
- Veterans Highway, Hauppauge, NY 11787
- Industry
- Not classified in OSHA's inspection record.
Planned Inspection: This inspection record is categorized as a planned inspection in the DOL OSHA enforcement data. Planned inspections are part of OSHA's scheduled enforcement activity rather than being opened directly from a complaint or reported incident at that worksite.
Violations
Violation list (21 of 21 shown)
| Citation | Standard | Type | Instances | Exposed | Initial | Current | Abatement | Contest | Final Order |
|---|---|---|---|---|---|---|---|---|---|
| 01001 | 1910.22 Walking-Working Surfaces - General Requirements OSHA citation code: 19100022 B01 | Serious | 1 | 10 | $0 | $0 | Jun 8, 1987 | - | - |
| 01002 | 1910.36 Design and Construction Requirements for Exit Routes OSHA citation code: 19100036 B04 | Serious | 1 | 1,050 | $0 | $0 | Jun 8, 1987 | - | - |
| 01003 | 1910.36 Design and Construction Requirements for Exit Routes OSHA citation code: 19100036 B06 | Serious | 1 | 100 | $0 | $0 | Jun 8, 1987 | - | - |
| 01004 | 1910.36 Design and Construction Requirements for Exit Routes OSHA citation code: 19100036 B07 | Serious | 1 | 25 | $0 | $0 | Aug 7, 1987 | - | - |
| 01005 | 1910.36 Design and Construction Requirements for Exit Routes OSHA citation code: 19100036 B08 | Serious | 1 | 25 | $0 | $0 | Aug 7, 1987 | - | - |
| 01006 | 1910.36 Design and Construction Requirements for Exit Routes OSHA citation code: 19100036 D02 | Serious | 1 | 5 | $0 | $0 | Jun 8, 1987 | - | - |
| 01007 | 1910.212 General Requirements for All Machines (Machine Guarding) OSHA citation code: 19100212 A03 II | Serious | 3 | 12 | $0 | $0 | Jun 8, 1987 | - | - |
| 01008 | 1910.212 General Requirements for All Machines (Machine Guarding) OSHA citation code: 19100212 A05 | Serious | 1 | 10 | $0 | $0 | Jun 8, 1987 | - | - |
| 01009 | 1910.212 General Requirements for All Machines (Machine Guarding) OSHA citation code: 19100212 B | Serious | 2 | 10 | $0 | $0 | Jun 8, 1987 | - | - |
| 01010 | 1910.213 Woodworking Machinery Requirements OSHA citation code: 19100213 C01 | Serious | 1 | 10 | $0 | $0 | Jun 8, 1987 | - | - |
| 01011 | 1910.213 Woodworking Machinery Requirements OSHA citation code: 19100213 H04 | Serious | 1 | 10 | $0 | $0 | Jun 8, 1987 | - | - |
| 01012 | 1910.219 Mechanical Power-Transmission Apparatus OSHA citation code: 19100219 C02 I | Serious | 1 | 5 | $0 | $0 | Jun 8, 1987 | - | - |
| 01013 | 1910.219 Mechanical Power-Transmission Apparatus OSHA citation code: 19100219 D01 | Serious | 10 | 10 | $0 | $0 | Jun 8, 1987 | - | - |
| 01014 | 1910.219 Mechanical Power-Transmission Apparatus OSHA citation code: 19100219 E01 I | Serious | 4 | 10 | $0 | $0 | Jun 8, 1987 | - | - |
| 01015 | 1910.219 Mechanical Power-Transmission Apparatus OSHA citation code: 19100219 E03 I | Serious | 6 | 10 | $0 | $0 | Jun 8, 1987 | - | - |
| 01016 | 1910.303 Electrical - General Requirements OSHA citation code: 19100303 H02 II | Serious | 1 | 10 | $0 | $0 | May 25, 1987 | - | - |
| 01017 | 1910.304 Electrical - Wiring Design and Protection OSHA citation code: 19100304 F05 V | Serious | 1 | 5 | $0 | $0 | Jun 8, 1987 | - | - |
| 01018 | 1910.305 Electrical - Wiring Methods, Components, and Equipment OSHA citation code: 19100305 B02 | Serious | 1 | 10 | $0 | $0 | May 25, 1987 | - | - |
| 02001 | 1910.157 Portable Fire Extinguishers OSHA citation code: 19100157 C04 | Other | 1 | 10 | $0 | $0 | Jun 8, 1987 | - | - |
| 02002 | 1910.157 Portable Fire Extinguishers OSHA citation code: 19100157 D01 | Other | 19 | 500 | $0 | $0 | Jun 8, 1987 | - | - |
| 02003 | 1910.157 Portable Fire Extinguishers OSHA citation code: 19100157 E03 | Other | 3 | 20 | $0 | $0 | Jun 8, 1987 | - | - |
Failure to Abate Penalties13 citations
OSHA's enforcement record shows Failure to Abate (FTA) activity recorded against 13 citations issued in this inspection. An FTA penalty is assessed during a follow-up inspection when OSHA's records indicate a previously cited hazard was not corrected by the abatement date. Each row below shows the FTA fields published on the original citation record: the follow-up inspection number, the FTA issuance date, the FTA penalty amount, and any FTA contest or final order date on record.
| Citation | FTA Inspection | FTA Issuance | FTA Penalty | FTA Contest | FTA Final Order |
|---|---|---|---|---|---|
| 01001 | #104843164 | Dec 9, 1987 | - | - | - |
| 01002 | #104843164 | Dec 9, 1987 | - | - | - |
| 01003 | #104843164 | Dec 9, 1987 | - | - | - |
| 01005 | #104843164 | Dec 9, 1987 | - | - | - |
| 01007 | #104843164 | Dec 9, 1987 | - | - | - |
| 01008 | #104843164 | Dec 9, 1987 | - | - | - |
| 01009 | #104843164 | Dec 9, 1987 | - | - | - |
| 01010 | #104843164 | Dec 9, 1987 | - | - | - |
| 01011 | #104843164 | Dec 9, 1987 | - | - | - |
| 01013 | #104843164 | Dec 9, 1987 | - | - | - |
| 01014 | #104843164 | Dec 9, 1987 | - | - | - |
| 02001 | #104843164 | Dec 9, 1987 | - | - | - |
| 02002 | #104843164 | Dec 9, 1987 | - | - | - |
Penalty amounts may differ from final amounts after settlement or judicial review. How to read these records
About these records
A company page groups inspections with the same normalized employer name, city and state; it is not a legal-entity identifier (how pages are grouped).
This page displays public OSHA enforcement data. Status text follows the DOL inspection record first and may include citation-level context when the inspection feed and citation records are out of sync. Penalty amounts shown reflect the latest penalty amounts on record in the DOL database and may differ from initial assessments or final amounts. This is not an official OSHA resource.
OSHA's public enforcement data does not publish a "guilty" or "not guilty" field for inspections. The closest outcome fields available are the citation counts, penalty amounts, contest dates, final-order dates, and the inspection close date shown on this page. How to interpret these status fields. How initial and current penalties are recorded.
OSHA may publish multiple citation rows in the same inspection with the same standard and penalty fields. Separate rows can still differ in OSHA metadata such as citation identifier, recorded instance count, exposed workers, or gravity value. Contest and Final Order columns show citation-level dates from OSHA's enforcement record. A dash means OSHA's record does not currently show that activity for the citation.
Source: U.S. Department of Labor OSHA enforcement data, violations table fields fta_insp_nr, fta_issuance_date, fta_penalty, fta_contest_date, fta_final_order_date. The FTA follow-up inspection is linked via fta_insp_nr to the inspection activity number (exact government key). When the follow-up inspection is not currently on record in SafetyRecord, the inspection number is shown without a link.
Understanding These Penalties
The maximum penalty for a serious violation in 2025 is $16,550 per violation. For willful violations, the range is $11,823 to $165,514. The current penalty column shows the latest amount on record in OSHA's database for each citation. When the current penalty differs from the initial penalty, OSHA's records show that the amount changed during the enforcement process, but this page does not determine the specific reason for each change. Penalty amounts are set by OSHA and adjusted annually for inflation.
2 inspections, 1987 to 1987. Each row is one inspection; point at or tap a row for its dates and totals.
Source: DOL OSHA enforcement data (inspections and violations), linked via activity_nr (exact government key).
Penalty changes: Amounts shown reflect what OSHA's enforcement record publishes. The reason for any change is not stated unless OSHA's record explicitly says so.
Short cases: When a case closed soon after it opened, the closed marker is drawn slightly to the right so both markers stay visible. Each row's card shows the exact dates.