Skip to content
SafetyRecord logoSafetyRecord

Inspection #108926163

Closed

This page displays public OSHA enforcement data. Status text follows the DOL inspection record first and may include citation-level context when the inspection feed and citation records are out of sync. Penalty amounts shown reflect the latest penalty amounts on record in the DOL database and may differ from initial assessments or final amounts. This is not an official OSHA resource.

The Occupational Safety and Health Administration (OSHA) conducted a accident inspection of AMERICAN DERRINGER CORPORATION at 127 N. Lacy Drive, Waco, TX 76075 on Aug 18, 1994. The inspection scope was complete. The case was closed on Jan 28, 1997.

OSHA documented 29 violations (25 serious, 4 other-than-serious) with total penalties on record of $4,600. 1 incident investigation summary is associated with this inspection. This inspection is linked to 1 accident report in OSHA records.

OSHA collected 2 air monitoring samples covering 1 substance during this inspection, including Lead, Inorganic (as Pb).

This employer has 7 other OSHA inspections on record at this establishment.

Inspection Details

Inspection Number
108926163
Type
Accident (A)
Scope
Complete
Opened
Aug 18, 1994
Closed
Jan 28, 1997
Total Violations
29
Penalties on Record
$4,600
Initial Penalties
$7,200
Related Activity
1 accident
Accident Inspection: This inspection record is categorized as an accident inspection in the U.S. Department of Labor OSHA enforcement data. Employers must report work-related fatalities within 8 hours, and work-related inpatient hospitalizations, amputations, or losses of an eye within 24 hours. An accident-related inspection does not by itself determine fault.

Establishment

Address
127 N. Lacy Drive, Waco, TX 76075
Industry
Not classified in OSHA's inspection record.

Other Inspections of This Employer7 on record

Other OSHA inspections of the same establishment. Linked via establishment ID (exact government key).

Incident Investigation Summaries

Incident investigation summaries linked to this inspection through OSHA's accident and injury enforcement data. These summaries describe the reported incident. The enforcement outcome for the linked inspection appears immediately below.

FatalityHospitalizationAug 17, 1994

Employee dies of gunshot wound

Injury: OtherBody part: Finger(s)

Source: U.S. Department of Labor OSHA incident investigation data (`osha_accident` + `osha_accident_injury`). Linked via `rel_insp_nr` to the inspection activity number (exact government key).

Enforcement Outcome

OSHA's public enforcement data does not publish a "guilty" or "not guilty" field for inspections. The closest outcome fields available are the citation counts, penalty amounts, contest dates, final-order dates, and the inspection close date shown on this page.

Status on Record
Closed

Inspection closed Jan 28, 1997.

Citations on Record
29

25 serious, 4 other-than-serious.

Initial Penalties
$7,200

Citation amounts as first recorded in OSHA's penalty fields.

Current Penalties
$4,600

Latest published amounts after changes in the enforcement process.

Chemical Exposure Sampling1 substance sampled

Air monitoring samples collected by OSHA during this inspection. Results grouped by substance.

SubstanceSamplesResult RangeUnit
Lead, Inorganic (as Pb)20.33 - 1.6mg/m³

Source: OSHA chemical exposure sampling data (OSHA Information System). P = Personal (worker breathing zone), A = Area (general air). Rows marked QC are analytical quality control measurements, not chemical exposures. OSHA PEL (Permissible Exposure Limit) values from the OSHA Occupational Chemical Database, matched via IMIS substance code (analyte code) (exact government key).

Violations

OSHA may publish multiple citation rows in the same inspection with the same standard and penalty fields. Separate rows can still differ in OSHA metadata such as citation identifier, recorded instance count, exposed workers, or gravity value. Contest and Final Order columns show citation-level dates from OSHA's enforcement record. A dash means OSHA's record does not currently show that activity for the citation.

CitationStandardTypeInitialCurrentAbatementContestFinal Order
010015A0001
General Duty Clause, Section 5(a)(1)
Serious$1,500$900Feb 1, 1995--
010031910.212
General Requirements for All Machines (Machine Guarding)
OSHA citation code: 19100212 A05
Serious$600$528Nov 23, 1994--
01004A1910.242
Hand and Portable Powered Tools and Equipment, General
OSHA citation code: 19100242 B
Serious$450$528Nov 16, 1994--
01004B1910.243
Guarding of Portable Powered Tools
OSHA citation code: 19100243 B02
Serious$0$0Dec 1, 1994--
010061910.1025
Lead
OSHA citation code: 19101025 C01
Serious$1,500$532Dec 30, 1994--
01007A1910.1025
Lead
OSHA citation code: 19101025 C01
Serious$1,050$528Jun 1, 1995--
01007B1910.1025
Lead
OSHA citation code: 19101025 E01
Serious$0$0Jun 1, 1995--
01007C1910.1025
Lead
OSHA citation code: 19101025 E03 I
Serious$0$0Jun 1, 1995--
01007D1910.1025
Lead
OSHA citation code: 19101025 F02 I
Serious$0$0Nov 20, 1994--
01007E1910.1025
Lead
OSHA citation code: 19101025 F04 I
Serious$0$0Dec 30, 1994--
01007F1910.1025
Lead
OSHA citation code: 19101025 J01 I
Serious$0$0Dec 30, 1994--
01008A1910.1025
Lead
OSHA citation code: 19101025 G01
Serious$1,050$528Nov 23, 1994--
01008B1910.1025
Lead
OSHA citation code: 19101025 H01
Serious$0$0Nov 17, 1994--
01008C1910.1025
Lead
OSHA citation code: 19101025 H02 II
Serious$0$0Nov 23, 1994--
01008D1910.1025
Lead
OSHA citation code: 19101025 I01
Serious$0$0Nov 16, 1994--
01008E1910.1025
Lead
OSHA citation code: 19101025 I02 I
Serious$0$0Dec 30, 1994--
01008F1910.1025
Lead
OSHA citation code: 19101025 I03 II
Serious$0$0Jun 1, 1995--
01008G1910.1025
Lead
OSHA citation code: 19101025 I04 IV
Serious$0$0Dec 8, 1994--
01009A1910.1025
Lead
OSHA citation code: 19101025 L01 I
Serious$1,050$528Nov 23, 1994--
01009B1910.1025
Lead
OSHA citation code: 19101025 L01 II
Serious$0$0Dec 30, 1994--
01009C1910.1025
Lead
OSHA citation code: 19101025 M02 I
Serious$0$0Nov 23, 1994--
01013A1910.1200
Hazard Communication
OSHA citation code: 19101200 E01
Serious$0$528Dec 30, 1994--
01013B1910.1200
Hazard Communication
OSHA citation code: 19101200 G01
Serious$0$0Dec 30, 1994--
01013C1910.1200
Hazard Communication
OSHA citation code: 19101200 H
Serious$0$0Dec 30, 1994--
01013D1910.147
Control of Hazardous Energy (Lockout/Tagout)
OSHA citation code: 19100147 C01
Serious$0$0Dec 30, 1994--
020011904.8
Recording Criteria for Needlestick and Sharps Injuries
Other$0$0Nov 16, 1994--
020021910.305
Electrical - Wiring Methods, Components, and Equipment
OSHA citation code: 19100305 B01
Other$0$0Nov 17, 1994--
020031910.305
Electrical - Wiring Methods, Components, and Equipment
OSHA citation code: 19100305 G02 II
Other$0$0Nov 17, 1994--
020041910.305
Electrical - Wiring Methods, Components, and Equipment
OSHA citation code: 19100305 G01 III
Other$0$0Nov 17, 1994--

Understanding These Penalties

The maximum penalty for a serious violation in 2025 is $16,550 per violation. For willful violations, the range is $11,823 to $165,514. The current penalty column shows the latest amount on record in OSHA's database for each citation. When the current penalty differs from the initial penalty, OSHA's records show that the amount changed during the enforcement process, but this page does not determine the specific reason for each change. Penalty amounts are set by OSHA and adjusted annually for inflation.

Data Source and Methodology

Data synced daily

Data on this page comes from the U.S. Department of Labor's OSHA enforcement database, accessed via the DOL public data API. Records are updated daily. We strive for accuracy, but errors in data processing or establishment grouping are possible. Penalty amounts reflect the latest penalty amounts on record in the DOL database and may differ from initial assessments or final amounts after informal conference, settlement, or judicial review. Company pages group inspection records by normalized employer name, city, and state as reported in OSHA records. That grouping is deterministic and non-fuzzy, but it is not a universal legal-entity identifier. On inspection pages, the status display follows the DOL inspection record first. If the DOL inspection feed includes a close date, we show the inspection as closed. If the inspection feed has no close date but all citation records tied to that inspection show a final order date, we label the page "Final Order Recorded" and disclose the citation dates instead of inferring a close date. Chemical exposure sampling data and OSHA Permissible Exposure Limits (PELs) are sourced from the OSHA Occupational Chemical Database, matched via IMIS analyte codes. If you believe any record is inaccurate, please report it and we will investigate. This product uses the DOL Data API but is not endorsed or certified by the DOL. For official and authoritative records, visit osha.gov.