ACME IRON WORKS
8535 ROLAND ACRES DRIVE, SANTEE, CA 92071
Having inspection records is common for businesses in regulated industries. Data and methodology
Inspection records
Jul 11, 1991#112013255Jul 11, 1991Accident (A) · Partial scope, Safety#112013255$00 viol.0 violations$0 in penalties
Inspection #112013255
Dates
- Opened
- Jul 11, 1991
- Closing Conference Date
- Dec 15, 1991
- Closed
- Mar 27, 1992
Inspection
- Advance Notice
- No
- Owner Type
- Private
- Union Status
- Yes
- Number of Employees
- 15
- Related Activity
- 1 accident
Violations and Penalties
- Total Violations
- 0
- Initial Penalties
- $0
- Penalties on Record
- $0
- Site Address
- 8535 Roland Acres Dr, Santee, CA 92071
- Industry
- Not classified in OSHA's inspection record.
Accident Inspection: This inspection record is categorized as an accident inspection in the U.S. Department of Labor OSHA enforcement data. Employers must report work-related fatalities within 8 hours, and work-related inpatient hospitalizations, amputations, or losses of an eye within 24 hours. An accident-related inspection does not by itself determine fault.
Incident Investigation Summaries
Incident investigation summaries linked to this inspection through OSHA's accident and injury enforcement data. These summaries describe the reported incident. The enforcement outcome for the linked inspection is in the inspection details above.
Employee's hand crushed by falling i-beam
Apr 15, 1988#102486909Apr 15, 1988Follow-Up (F) · Partial scope, Safety#102486909$00 viol.0 violations$0 in penalties
Inspection #102486909
Dates
- Opened
- Apr 15, 1988
- Closing Conference Date
- Apr 15, 1988
- Closed
- Apr 15, 1988
Inspection
- Advance Notice
- No
- Owner Type
- Private
- Union Status
- No
- Number of Employees
- 13
Violations and Penalties
- Total Violations
- 0
- Initial Penalties
- $0
- Penalties on Record
- $0
- Site Address
- 8535 Roland Acres Drive, Santee, CA 92071
- Industry
- Not classified in OSHA's inspection record.
Follow-Up Inspection: This inspection record is categorized as a follow-up inspection in the DOL OSHA enforcement data. Follow-up inspections are used by OSHA after earlier enforcement activity and can be used to check later compliance status.
Feb 22, 1988#107067209Feb 22, 1988Planned (H) · Complete scope, Safety#107067209$27014 viol.14 violations$270 in penalties
Inspection #107067209
Dates
- Opened
- Feb 22, 1988
- Closing Conference Date
- Feb 22, 1988
- Closed
- May 10, 1988
Inspection
- Advance Notice
- No
- Owner Type
- Private
- Union Status
- No
- Number of Employees
- 13
Violations and Penalties
- Total Violations
- 14
- Violation Types
- 2 serious, 12 other-than-serious
- Initial Penalties
- $270
- Penalties on Record
- $270
- Site Address
- 8535 Roland Acres Drive, Santee, CA 92071
- Industry
- Not classified in OSHA's inspection record.
Planned Inspection: This inspection record is categorized as a planned inspection in the DOL OSHA enforcement data. Planned inspections are part of OSHA's scheduled enforcement activity rather than being opened directly from a complaint or reported incident at that worksite.
Violations
Violation list (14 of 14 shown)
| Citation | Standard | Type | Instances | Exposed | Initial | Current | Abatement | Contest | Final Order |
|---|---|---|---|---|---|---|---|---|---|
| 01001 | 1910.243 Guarding of Portable Powered Tools OSHA citation code: 19100243 C01 | Serious | 2 | 4 | $120 | $120 | Mar 10, 1988 | - | - |
| 01002 | 1910.305 Electrical - Wiring Methods, Components, and Equipment OSHA citation code: 19100305 A04 IV | Serious | 1 | 5 | $150 | $150 | Mar 10, 1988 | - | - |
| 02001 | 1904.2 Partial Exemption for Establishments in Certain Industries OSHA citation code: 19040002 A | Other | 1 | 13 | $0 | $0 | Mar 11, 1988 | - | - |
| 02002 | 1910.212 General Requirements for All Machines (Machine Guarding) OSHA citation code: 19100212 A01 | Other | 1 | 5 | $0 | $0 | Apr 1, 1988 | - | - |
| 02003A | 1910.215 Abrasive Wheel Machinery OSHA citation code: 19100215 A04 | Other | 2 | 4 | $0 | $0 | Mar 10, 1988 | - | - |
| 02003B | 1910.215 Abrasive Wheel Machinery OSHA citation code: 19100215 A04 | Other | 1 | - | $0 | $0 | Mar 10, 1988 | - | - |
| 02004 | 1910.215 Abrasive Wheel Machinery OSHA citation code: 19100215 B09 | Other | 1 | 5 | $0 | $0 | Mar 10, 1988 | - | - |
| 02005 | 1910.218 Forging Machines OSHA citation code: 19100218 B02 | Other | 1 | 3 | $0 | $0 | Mar 10, 1988 | - | - |
| 02006 | 1910.252 Welding, Cutting, and Brazing - General Requirements OSHA citation code: 19100252 A02 IIIB | Other | 1 | 5 | $0 | $0 | Mar 10, 1988 | - | - |
| 02007 | 1910.252 Welding, Cutting, and Brazing - General Requirements OSHA citation code: 19100252 A02 IVC | Other | 1 | 5 | $0 | $0 | Mar 10, 1988 | - | - |
| 02008 | 1910.252 Welding, Cutting, and Brazing - General Requirements OSHA citation code: 19100252 B02 IVD | Other | 2 | 5 | $0 | $0 | Apr 1, 1988 | - | - |
| 02009 | 1910.303 Electrical - General Requirements OSHA citation code: 19100303 F | Other | 2 | 8 | $0 | $0 | Mar 10, 1988 | - | - |
| 02010 | 1910.305 Electrical - Wiring Methods, Components, and Equipment OSHA citation code: 19100305 G02 III | Other | 1 | 3 | $0 | $0 | Mar 7, 1988 | - | - |
| 02011 | 1910.1200 Hazard Communication OSHA citation code: 19101200 E01 | Other | 1 | 13 | $0 | $0 | Apr 1, 1988 | - | - |
Failure to Abate Penalties1 citation, $355 in FTA penalties on record
OSHA's enforcement record shows Failure to Abate (FTA) activity recorded against 1 citation issued in this inspection. An FTA penalty is assessed during a follow-up inspection when OSHA's records indicate a previously cited hazard was not corrected by the abatement date. Each row below shows the FTA fields published on the original citation record: the follow-up inspection number, the FTA issuance date, the FTA penalty amount, and any FTA contest or final order date on record.
| Citation | FTA Inspection | FTA Issuance | FTA Penalty | FTA Contest | FTA Final Order |
|---|---|---|---|---|---|
| 02011 | #102486909 | Apr 22, 1988 | $355 | - | - |
Penalty amounts may differ from final amounts after settlement or judicial review. How to read these records
About these records
A company page groups inspections with the same normalized employer name, city and state; it is not a legal-entity identifier (how pages are grouped).
This page displays public OSHA enforcement data. Status text follows the DOL inspection record first and may include citation-level context when the inspection feed and citation records are out of sync. Penalty amounts shown reflect the latest penalty amounts on record in the DOL database and may differ from initial assessments or final amounts. This is not an official OSHA resource.
OSHA's public enforcement data does not publish a "guilty" or "not guilty" field for inspections. The closest outcome fields available are the citation counts, penalty amounts, contest dates, final-order dates, and the inspection close date shown on this page. How to interpret these status fields. How initial and current penalties are recorded.
OSHA may publish multiple citation rows in the same inspection with the same standard and penalty fields. Separate rows can still differ in OSHA metadata such as citation identifier, recorded instance count, exposed workers, or gravity value. Contest and Final Order columns show citation-level dates from OSHA's enforcement record. A dash means OSHA's record does not currently show that activity for the citation.
Source: U.S. Department of Labor OSHA incident investigation data (`osha_accident` + `osha_accident_injury`). Linked via `rel_insp_nr` to the inspection activity number (exact government key). Injury, body part, source and event values are OSHA's own codes. OSHA states that these fields are not coded according to the requirements under the Occupational Injury and Illness Classification System (OIICS). Only the values present in the OSHA record are listed; an incident with no value that resolves in OSHA's code table shows "Injury details not recorded". Where a record covers several people, each field lists every value recorded across them.
Source: U.S. Department of Labor OSHA enforcement data, violations table fields fta_insp_nr, fta_issuance_date, fta_penalty, fta_contest_date, fta_final_order_date. The FTA follow-up inspection is linked via fta_insp_nr to the inspection activity number (exact government key). When the follow-up inspection is not currently on record in SafetyRecord, the inspection number is shown without a link.
Understanding These Penalties
The maximum penalty for a serious violation in 2025 is $16,550 per violation. For willful violations, the range is $11,823 to $165,514. The current penalty column shows the latest amount on record in OSHA's database for each citation. When the current penalty differs from the initial penalty, OSHA's records show that the amount changed during the enforcement process, but this page does not determine the specific reason for each change. Penalty amounts are set by OSHA and adjusted annually for inflation.
3 inspections, 1988 to 1991. Each row is one inspection; point at or tap a row for its dates and totals.
Source: DOL OSHA enforcement data (inspections and violations), linked via activity_nr (exact government key).
Penalty changes: Amounts shown reflect what OSHA's enforcement record publishes. The reason for any change is not stated unless OSHA's record explicitly says so.
Short cases: When a case closed soon after it opened, the closed marker is drawn slightly to the right so both markers stay visible. Each row's card shows the exact dates.