Skip to content
SafetyRecord logoSafetyRecord

Inspection #112370028

Closed

This page displays public OSHA enforcement data. Status text follows the DOL inspection record first and may include citation-level context when the inspection feed and citation records are out of sync. Penalty amounts shown reflect the latest penalty amounts on record in the DOL database and may differ from initial assessments or final amounts. This is not an official OSHA resource.

The Occupational Safety and Health Administration (OSHA) conducted a accident inspection of MOUNTCASTLE WOOD PRODUCTS, INC. at State Route 618, Providence Forge, VA 23140 on Aug 14, 1990. The inspection scope was partial. The case was closed on Mar 20, 1991.

OSHA documented 25 violations (10 serious, 15 other-than-serious) with total penalties on record of $1,665. 1 incident investigation summary is associated with this inspection. This inspection is linked to 1 accident report in OSHA records.

This employer has 5 other OSHA inspections on record at this establishment.

Inspection Details

Inspection Number
112370028
Type
Accident (A)
Scope
Partial
Opened
Aug 14, 1990
Closed
Mar 20, 1991
Contested
Nov 8, 1990
Final Order
Dec 27, 1990
Total Violations
25
Penalties on Record
$1,665
Initial Penalties
$3,280
Related Activity
1 accident
Accident Inspection: This inspection record is categorized as an accident inspection in the U.S. Department of Labor OSHA enforcement data. Employers must report work-related fatalities within 8 hours, and work-related inpatient hospitalizations, amputations, or losses of an eye within 24 hours. An accident-related inspection does not by itself determine fault.

Establishment

Address
State Route 618, Providence Forge, VA 23140
Industry
Not classified in OSHA's inspection record.

Other Inspections of This Employer5 on record

Other OSHA inspections of the same establishment. Linked via establishment ID (exact government key).

Incident Investigation Summaries

Incident investigation summaries linked to this inspection through OSHA's accident and injury enforcement data. These summaries describe the reported incident. The enforcement outcome for the linked inspection appears immediately below.

FatalityJul 26, 1990

Employee killed when struck by board

Injury: OtherBody part: Abdomen

Source: U.S. Department of Labor OSHA incident investigation data (`osha_accident` + `osha_accident_injury`). Linked via `rel_insp_nr` to the inspection activity number (exact government key).

Enforcement Outcome

OSHA's public enforcement data does not publish a "guilty" or "not guilty" field for inspections. The closest outcome fields available are the citation counts, penalty amounts, contest dates, final-order dates, and the inspection close date shown on this page.

Status on Record
Closed

Inspection closed Mar 20, 1991.

Citations on Record
25

10 serious, 15 other-than-serious.

Initial Penalties
$3,280

Citation amounts as first recorded in OSHA's penalty fields.

Current Penalties
$1,665

Latest published amounts after changes in the enforcement process.

Citation contest activity appears on Nov 8, 1990. Final orders are recorded through Dec 27, 1990. Penalty changes shown on this page reflect the latest amounts published in OSHA's enforcement data.

Violations

OSHA may publish multiple citation rows in the same inspection with the same standard and penalty fields. Separate rows can still differ in OSHA metadata such as citation identifier, recorded instance count, exposed workers, or gravity value. Contest and Final Order columns show citation-level dates from OSHA's enforcement record. A dash means OSHA's record does not currently show that activity for the citation.

CitationStandardTypeInitialCurrentAbatementContestFinal Order
01001510001
OSHA citation code: 510001 A
Serious$640$320Oct 25, 1990Nov 8, 1990Dec 27, 1990
010021910.147
Control of Hazardous Energy (Lockout/Tagout)
OSHA citation code: 19100147 C01
Serious$350$175Nov 6, 1990Nov 8, 1990Dec 27, 1990
010031910.147
Control of Hazardous Energy (Lockout/Tagout)
OSHA citation code: 19100147 C05 I
Serious$350$175Oct 22, 1990Nov 8, 1990Dec 27, 1990
01004A1910.147
Control of Hazardous Energy (Lockout/Tagout)
OSHA citation code: 19100147 C07 IA
Serious$640$320Nov 6, 1990Nov 8, 1990Dec 27, 1990
01004B1910.147
Control of Hazardous Energy (Lockout/Tagout)
OSHA citation code: 19100147 C07 IA
Serious$0$0Nov 6, 1990Nov 8, 1990Dec 27, 1990
01005A1910.219
Mechanical Power-Transmission Apparatus
OSHA citation code: 19100219 D01
Serious$350$175Oct 25, 1990Nov 8, 1990Dec 27, 1990
01005B1910.219
Mechanical Power-Transmission Apparatus
OSHA citation code: 19100219 E01 I
Serious$0$0Oct 25, 1990Nov 8, 1990Dec 27, 1990
010061910.219
Mechanical Power-Transmission Apparatus
OSHA citation code: 19100219 F03
Serious$300$150Oct 29, 1990Nov 8, 1990Dec 27, 1990
010071910.242
Hand and Portable Powered Tools and Equipment, General
OSHA citation code: 19100242 B
Serious$300$150Oct 22, 1990Nov 8, 1990Dec 27, 1990
010081910.243
Guarding of Portable Powered Tools
OSHA citation code: 19100243 C01
Serious$300$150Oct 22, 1990Nov 8, 1990Dec 27, 1990
02001ARM001103
OSHA citation code: ARM001103 A
Other$50$50Oct 22, 1990Nov 8, 1990Dec 27, 1990
020021910.23
Ladders
OSHA citation code: 19100023 E02
Other$0$0Oct 22, 1990Nov 8, 1990Dec 27, 1990
020031910.106
Flammable Liquids
OSHA citation code: 19100106 D02 I
Other$0$0Oct 22, 1990Nov 8, 1990Dec 27, 1990
020041910.106
Flammable Liquids
OSHA citation code: 19100106 G08
Other$0$0Oct 22, 1990Nov 8, 1990Dec 27, 1990
020051910.106
Flammable Liquids
OSHA citation code: 19100106 G09
Other$0$0Oct 22, 1990Nov 8, 1990Dec 27, 1990
020061910.219
Mechanical Power-Transmission Apparatus
OSHA citation code: 19100219 C04 I
Other$0$0Oct 29, 1990Nov 8, 1990Dec 27, 1990
020071910.265
Sawmills
OSHA citation code: 19100265 C05 I
Other$0$0Oct 25, 1990Nov 8, 1990Dec 27, 1990
020081910.265
Sawmills
OSHA citation code: 19100265 C05 II
Other$0$0Oct 25, 1990Nov 8, 1990Dec 27, 1990
020091910.305
Electrical - Wiring Methods, Components, and Equipment
OSHA citation code: 19100305 A02 IIIG
Other$0$0Oct 22, 1990Nov 8, 1990Dec 27, 1990
020101910.305
Electrical - Wiring Methods, Components, and Equipment
OSHA citation code: 19100305 G01 I
Other$0$0Oct 22, 1990Nov 8, 1990Dec 27, 1990
020111910.305
Electrical - Wiring Methods, Components, and Equipment
OSHA citation code: 19100305 G01 III
Other$0$0Oct 22, 1990Nov 8, 1990Dec 27, 1990
020121910.305
Electrical - Wiring Methods, Components, and Equipment
OSHA citation code: 19100305 G02 III
Other$0$0Oct 22, 1990Nov 8, 1990Dec 27, 1990
020131910.305
Electrical - Wiring Methods, Components, and Equipment
OSHA citation code: 19100305 J02 II
Other$0$0Oct 25, 1990Nov 8, 1990Dec 27, 1990
020141910.1200
Hazard Communication
OSHA citation code: 19101200 F05 I
Other$0$0Oct 22, 1990Nov 8, 1990Dec 27, 1990
020151910.1200
Hazard Communication
OSHA citation code: 19101200 F05 II
Other$0$0Oct 22, 1990Nov 8, 1990Dec 27, 1990

Understanding These Penalties

The maximum penalty for a serious violation in 2025 is $16,550 per violation. For willful violations, the range is $11,823 to $165,514. The current penalty column shows the latest amount on record in OSHA's database for each citation. When the current penalty differs from the initial penalty, OSHA's records show that the amount changed during the enforcement process, but this page does not determine the specific reason for each change. Penalty amounts are set by OSHA and adjusted annually for inflation.

Data Source and Methodology

Data synced daily

Data on this page comes from the U.S. Department of Labor's OSHA enforcement database, accessed via the DOL public data API. Records are updated daily. We strive for accuracy, but errors in data processing or establishment grouping are possible. Penalty amounts reflect the latest penalty amounts on record in the DOL database and may differ from initial assessments or final amounts after informal conference, settlement, or judicial review. Company pages group inspection records by normalized employer name, city, and state as reported in OSHA records. That grouping is deterministic and non-fuzzy, but it is not a universal legal-entity identifier. On inspection pages, the status display follows the DOL inspection record first. If the DOL inspection feed includes a close date, we show the inspection as closed. If the inspection feed has no close date but all citation records tied to that inspection show a final order date, we label the page "Final Order Recorded" and disclose the citation dates instead of inferring a close date. Chemical exposure sampling data and OSHA Permissible Exposure Limits (PELs) are sourced from the OSHA Occupational Chemical Database, matched via IMIS analyte codes. If you believe any record is inaccurate, please report it and we will investigate. This product uses the DOL Data API but is not endorsed or certified by the DOL. For official and authoritative records, visit osha.gov.