STATE OF MARYLAND, DHMH, GREAT OAKS CENTER
3100 GRACEFIELD ROAD, SILVER SPRING, MD 20904
Having inspection records is common for businesses in regulated industries. Data and methodology
Inspection records
Jan 6, 1994#119587830Jan 6, 1994Complaint (B) · Partial scope, Safety#119587830$02 viol.2 violations$0 in penalties
Inspection #119587830
Dates
- Opened
- Jan 6, 1994
- Closing Conference Date
- Jan 6, 1994
- Closed
- Apr 13, 1994
Inspection
- Advance Notice
- No
- Owner Type
- State government
- Union Status
- Yes
- Number of Employees
- 3
- Related Activity
- 1 complaint
Violations and Penalties
- Total Violations
- 2
- Violation Types
- 1 serious, 1 repeat
- Initial Penalties
- $0
- Penalties on Record
- $0
- Site Address
- 3100 Gracefield Road, Silver Spring, MD 20904
- Industry
- Not classified in OSHA's inspection record.
Complaint Inspection: This inspection record is categorized as a complaint inspection in the DOL OSHA enforcement data. OSHA can open complaint-driven inspections after receiving safety or health complaints from workers or their representatives.
Violations
Violation list (2 of 2 shown)
| Citation | Standard | Type | Instances | Exposed | Initial | Current | Abatement | Contest | Final Order |
|---|---|---|---|---|---|---|---|---|---|
| 01001 | 1910.253 Oxygen-Fuel Gas Welding and Cutting OSHA citation code: 19100253 B02 II | Repeat | 1 | 3 | $0 | $0 | Feb 17, 1994 | - | - |
| 02001 | 1910.253 Oxygen-Fuel Gas Welding and Cutting OSHA citation code: 19100253 B02 IV | Serious | 1 | 3 | $0 | $0 | Feb 17, 1994 | - | - |
Nov 24, 1992#119510766Nov 24, 1992Complaint (B) · Partial scope, Safety#119510766$013 viol.13 violations$0 in penalties
Inspection #119510766
Dates
- Opened
- Nov 24, 1992
- Closing Conference Date
- Dec 2, 1992
- Closed
- Jan 31, 1993
Inspection
- Advance Notice
- No
- Owner Type
- State government
- Union Status
- Yes
- Number of Employees
- 3
- Related Activity
- 1 complaint
Violations and Penalties
- Total Violations
- 13
- Violation Types
- 9 serious, 4 other-than-serious
- Initial Penalties
- $0
- Penalties on Record
- $0
- Site Address
- 3100 Gracefield Road, Silver Spring, MD 20904
- Industry
- Not classified in OSHA's inspection record.
Complaint Inspection: This inspection record is categorized as a complaint inspection in the DOL OSHA enforcement data. OSHA can open complaint-driven inspections after receiving safety or health complaints from workers or their representatives.
Violations
Violation list (13 of 13 shown)
| Citation | Standard | Type | Instances | Exposed | Initial | Current | Abatement | Contest | Final Order |
|---|---|---|---|---|---|---|---|---|---|
| 01001 | 1910.37 Maintenance, Safeguards, and Operational Features for Exit Routes OSHA citation code: 19100037 Q01 | Serious | 1 | 2 | $0 | $0 | Feb 22, 1993 | - | - |
| 02001 | 1910.212 General Requirements for All Machines (Machine Guarding) OSHA citation code: 19100212 A01 | Serious | 1 | 1 | $0 | $0 | Mar 7, 1993 | - | - |
| 03001 | 1910.215 Abrasive Wheel Machinery OSHA citation code: 19100215 A04 | Serious | 2 | 2 | $0 | $0 | Feb 22, 1993 | - | - |
| 03002 | 1910.215 Abrasive Wheel Machinery OSHA citation code: 19100215 B09 | Serious | 2 | 2 | $0 | $0 | Feb 22, 1993 | - | - |
| 04001 | 1910.244 Other Portable Tools and Equipment OSHA citation code: 19100244 A02 III | Serious | 1 | 1 | $0 | $0 | Mar 7, 1993 | - | - |
| 05001 | 1910.252 Welding, Cutting, and Brazing - General Requirements OSHA citation code: 19100252 B02 III | Serious | 1 | 1 | $0 | $0 | Feb 22, 1993 | - | - |
| 05002 | 1910.252 Welding, Cutting, and Brazing - General Requirements OSHA citation code: 19100252 C11 II | Serious | 1 | 2 | $0 | $0 | Feb 22, 1993 | - | - |
| 06001 | 1910.1200 Hazard Communication OSHA citation code: 19101200 E01 | Serious | 1 | 2 | $0 | $0 | Feb 22, 1993 | - | - |
| 06002 | 1910.1200 Hazard Communication OSHA citation code: 19101200 G01 | Serious | 1 | 2 | $0 | $0 | Feb 22, 1993 | - | - |
| 07001 | 1910.108 Dip Tanks (Reserved) OSHA citation code: 19100108 G06 IV | Other | 1 | 2 | $0 | $0 | Feb 22, 1993 | - | - |
| 07002 | 1910.253 Oxygen-Fuel Gas Welding and Cutting OSHA citation code: 19100253 B02 II | Other | 1 | 2 | $0 | $0 | Feb 22, 1993 | - | - |
| 07003 | 1910.303 Electrical - General Requirements OSHA citation code: 19100303 G01 II | Other | 1 | 2 | $0 | $0 | Feb 22, 1993 | - | - |
| 07004 | 50405 OSHA citation code: 50405 C | Other | 2 | 2 | $0 | $0 | Feb 22, 1993 | - | - |
Failure to Abate Penalties1 citation
OSHA's enforcement record shows Failure to Abate (FTA) activity recorded against 1 citation issued in this inspection. An FTA penalty is assessed during a follow-up inspection when OSHA's records indicate a previously cited hazard was not corrected by the abatement date. Each row below shows the FTA fields published on the original citation record: the follow-up inspection number, the FTA issuance date, the FTA penalty amount, and any FTA contest or final order date on record.
| Citation | FTA Inspection | FTA Issuance | FTA Penalty | FTA Contest | FTA Final Order |
|---|---|---|---|---|---|
| 04001 | #119587830 | Feb 14, 1994 | - | - | - |
Penalty amounts may differ from final amounts after settlement or judicial review. How to read these records
About these records
A company page groups inspections with the same normalized employer name, city and state; it is not a legal-entity identifier (how pages are grouped).
This page displays public OSHA enforcement data. Status text follows the DOL inspection record first and may include citation-level context when the inspection feed and citation records are out of sync. Penalty amounts shown reflect the latest penalty amounts on record in the DOL database and may differ from initial assessments or final amounts. This is not an official OSHA resource.
OSHA's public enforcement data does not publish a "guilty" or "not guilty" field for inspections. The closest outcome fields available are the citation counts, penalty amounts, contest dates, final-order dates, and the inspection close date shown on this page. How to interpret these status fields. How initial and current penalties are recorded.
OSHA may publish multiple citation rows in the same inspection with the same standard and penalty fields. Separate rows can still differ in OSHA metadata such as citation identifier, recorded instance count, exposed workers, or gravity value. Contest and Final Order columns show citation-level dates from OSHA's enforcement record. A dash means OSHA's record does not currently show that activity for the citation.
Source: U.S. Department of Labor OSHA enforcement data, violations table fields fta_insp_nr, fta_issuance_date, fta_penalty, fta_contest_date, fta_final_order_date. The FTA follow-up inspection is linked via fta_insp_nr to the inspection activity number (exact government key). When the follow-up inspection is not currently on record in SafetyRecord, the inspection number is shown without a link.
Understanding These Penalties
The maximum penalty for a serious violation in 2025 is $16,550 per violation. For willful violations, the range is $11,823 to $165,514. The current penalty column shows the latest amount on record in OSHA's database for each citation. When the current penalty differs from the initial penalty, OSHA's records show that the amount changed during the enforcement process, but this page does not determine the specific reason for each change. Penalty amounts are set by OSHA and adjusted annually for inflation.
2 inspections, 1992 to 1994. Each row is one inspection; point at or tap a row for its dates and totals.
Source: DOL OSHA enforcement data (inspections and violations), linked via activity_nr (exact government key).
Penalty changes: Amounts shown reflect what OSHA's enforcement record publishes. The reason for any change is not stated unless OSHA's record explicitly says so.