DEPT OF INTERIOR, NATL PARK SERVICE
6565 GREENBELT ROAD, GREENBELT, MD 20770
Having inspection records is common for businesses in regulated industries. Data and methodology
Inspection records
Apr 17, 1997#301098968Apr 17, 1997Follow-Up (F) · Partial scope, Safety#301098968$00 viol.0 violations$0 in penalties
Inspection #301098968
Dates
- Opened
- Apr 17, 1997
- Closing Conference Date
- Apr 17, 1997
- Closed
- Apr 28, 1997
Inspection
- Advance Notice
- No
- Owner Type
- Federal
- Union Status
- Yes
- Number of Employees
- 30
Violations and Penalties
- Total Violations
- 0
- Initial Penalties
- $0
- Penalties on Record
- $0
- Site Address
- 6565 Greenbelt Road, Greenbelt, MD 20770
- Industry
- Not classified in OSHA's inspection record.
Follow-Up Inspection: This inspection record is categorized as a follow-up inspection in the DOL OSHA enforcement data. Follow-up inspections are used by OSHA after earlier enforcement activity and can be used to check later compliance status.
Feb 21, 1997#123510539Feb 21, 1997Planned (H) · Complete scope, Safety#123510539$028 viol.28 violations$0 in penalties
Inspection #123510539
Dates
- Opened
- Feb 21, 1997
- Closing Conference Date
- Feb 24, 1997
- Closed
- May 27, 1997
Inspection
- Advance Notice
- No
- Owner Type
- Federal
- Union Status
- Yes
- Number of Employees
- 30
Violations and Penalties
- Total Violations
- 28
- Violation Types
- 28 serious
- Initial Penalties
- $0
- Penalties on Record
- $0
- Site Address
- 6565 Greenbelt Road, Greenbelt, MD 20770
- Industry
- Not classified in OSHA's inspection record.
Planned Inspection: This inspection record is categorized as a planned inspection in the DOL OSHA enforcement data. Planned inspections are part of OSHA's scheduled enforcement activity rather than being opened directly from a complaint or reported incident at that worksite.
Violations
Violation list (25 of 28 shown)
| Citation | Standard | Type | Instances | Exposed | Initial | Current | Abatement | Contest | Final Order |
|---|---|---|---|---|---|---|---|---|---|
| 01001A | 1910.106 Flammable Liquids OSHA citation code: 19100106 E09 III | Serious | 1 | 15 | $0 | $0 | Mar 19, 1997 | - | - |
| 01001B | 1910.106 Flammable Liquids OSHA citation code: 19100106 G03 III | Serious | 1 | 15 | $0 | $0 | Mar 19, 1997 | - | - |
| 01002 | 1910.132 Personal Protective Equipment - General Requirements OSHA citation code: 19100132 D01 | Serious | 30 | 30 | $0 | $0 | Apr 16, 1997 | - | - |
| 01003A | 1910.134 Respiratory Protection OSHA citation code: 19100134 B03 | Serious | 1 | 1 | $0 | $0 | Apr 16, 1997 | - | - |
| 01003B | 1910.134 Respiratory Protection OSHA citation code: 19100134 B10 | Serious | 1 | 1 | $0 | $0 | Apr 16, 1997 | - | - |
| 01003C | 1910.134 Respiratory Protection OSHA citation code: 19100134 E05 I | Serious | 1 | 1 | $0 | $0 | Mar 19, 1997 | - | - |
| 01004A | 1910.146 Permit-Required Confined Spaces OSHA citation code: 19100146 C02 | Serious | 1 | 4 | $0 | $0 | Mar 19, 1997 | - | - |
| 01004B | 1910.146 Permit-Required Confined Spaces OSHA citation code: 19100146 C04 | Serious | 1 | 4 | $0 | $0 | Mar 18, 1997 | - | - |
| 01004C | 1910.146 Permit-Required Confined Spaces OSHA citation code: 19100146 C05 IIC | Serious | 1 | 4 | $0 | $0 | Mar 19, 1997 | - | - |
| 01005A | 1910.184 Slings OSHA citation code: 19100184 E01 | Serious | 1 | 30 | $0 | $0 | Mar 24, 1997 | - | - |
| 01005B | 1910.184 Slings OSHA citation code: 19100184 E03 I | Serious | 1 | 6 | $0 | $0 | Mar 24, 1997 | - | - |
| 01006A | 1910.212 General Requirements for All Machines (Machine Guarding) OSHA citation code: 19100212 A03 II | Serious | 1 | 5 | $0 | $0 | Mar 24, 1997 | - | - |
| 01006B | 1910.212 General Requirements for All Machines (Machine Guarding) OSHA citation code: 19100212 B | Serious | 1 | 5 | $0 | $0 | Mar 19, 1997 | - | - |
| 01007A | 1910.213 Woodworking Machinery Requirements OSHA citation code: 19100213 B03 | Serious | 1 | 3 | $0 | $0 | Mar 24, 1997 | - | - |
| 01007B | 1910.213 Woodworking Machinery Requirements OSHA citation code: 19100213 H04 | Serious | 1 | 3 | $0 | $0 | Mar 24, 1997 | - | - |
| 01008A | 1910.215 Abrasive Wheel Machinery OSHA citation code: 19100215 A04 | Serious | 1 | 4 | $0 | $0 | Mar 19, 1997 | - | - |
| 01008B | 1910.215 Abrasive Wheel Machinery OSHA citation code: 19100215 B09 | Serious | 1 | 4 | $0 | $0 | Mar 19, 1997 | - | - |
| 01009A | 1910.219 Mechanical Power-Transmission Apparatus OSHA citation code: 19100219 D01 | Serious | 1 | 4 | $0 | $0 | Mar 24, 1997 | - | - |
| 01009B | 1910.219 Mechanical Power-Transmission Apparatus OSHA citation code: 19100219 E01 | Serious | 1 | 4 | $0 | $0 | Mar 24, 1997 | - | - |
| 01010 | 1910.242 Hand and Portable Powered Tools and Equipment, General OSHA citation code: 19100242 B | Serious | 1 | 2 | $0 | $0 | Mar 19, 1997 | - | - |
| 01011 | 1910.253 Oxygen-Fuel Gas Welding and Cutting OSHA citation code: 19100253 B02 IV | Serious | 1 | 6 | $0 | $0 | Mar 19, 1997 | - | - |
| 01012A | 1910.303 Electrical - General Requirements OSHA citation code: 19100303 F | Serious | 1 | 4 | $0 | $0 | Apr 16, 1997 | - | - |
| 01012B | 1910.303 Electrical - General Requirements OSHA citation code: 19100303 G02 I | Serious | 2 | 4 | $0 | $0 | Mar 27, 1997 | - | - |
| 01012C | 1910.303 Electrical - General Requirements OSHA citation code: 19100303 G02 II | Serious | 1 | 1 | $0 | $0 | Mar 24, 1997 | - | - |
| 01012D | 1910.305 Electrical - Wiring Methods, Components, and Equipment OSHA citation code: 19100305 G02 III | Serious | 1 | 1 | $0 | $0 | Mar 19, 1997 | - | - |
Showing the 25 violations listed first by citation identifier. This inspection has 28 total violations documented in the U.S. Department of Labor OSHA enforcement database. The complete violation list is available at enforcedata.dol.gov.
Failure to Abate Penalties3 citations
OSHA's enforcement record shows Failure to Abate (FTA) activity recorded against 3 citations issued in this inspection. An FTA penalty is assessed during a follow-up inspection when OSHA's records indicate a previously cited hazard was not corrected by the abatement date. Each row below shows the FTA fields published on the original citation record: the follow-up inspection number, the FTA issuance date, the FTA penalty amount, and any FTA contest or final order date on record.
| Citation | FTA Inspection | FTA Issuance | FTA Penalty | FTA Contest | FTA Final Order |
|---|
Showing the 0 FTA rows present in the first 25 citations on this inspection. OSHA's record shows 3 total citations with FTA activity for this inspection. The complete list is available at enforcedata.dol.gov.
Penalty amounts may differ from final amounts after settlement or judicial review. How to read these records
About these records
A company page groups inspections with the same normalized employer name, city and state; it is not a legal-entity identifier (how pages are grouped).
This page displays public OSHA enforcement data. Status text follows the DOL inspection record first and may include citation-level context when the inspection feed and citation records are out of sync. Penalty amounts shown reflect the latest penalty amounts on record in the DOL database and may differ from initial assessments or final amounts. This is not an official OSHA resource.
OSHA's public enforcement data does not publish a "guilty" or "not guilty" field for inspections. The closest outcome fields available are the citation counts, penalty amounts, contest dates, final-order dates, and the inspection close date shown on this page. How to interpret these status fields. How initial and current penalties are recorded.
OSHA may publish multiple citation rows in the same inspection with the same standard and penalty fields. Separate rows can still differ in OSHA metadata such as citation identifier, recorded instance count, exposed workers, or gravity value. Contest and Final Order columns show citation-level dates from OSHA's enforcement record. A dash means OSHA's record does not currently show that activity for the citation.
Source: U.S. Department of Labor OSHA enforcement data, violations table fields fta_insp_nr, fta_issuance_date, fta_penalty, fta_contest_date, fta_final_order_date. The FTA follow-up inspection is linked via fta_insp_nr to the inspection activity number (exact government key). When the follow-up inspection is not currently on record in SafetyRecord, the inspection number is shown without a link.
Understanding These Penalties
The maximum penalty for a serious violation in 2025 is $16,550 per violation. For willful violations, the range is $11,823 to $165,514. The current penalty column shows the latest amount on record in OSHA's database for each citation. When the current penalty differs from the initial penalty, OSHA's records show that the amount changed during the enforcement process, but this page does not determine the specific reason for each change. Penalty amounts are set by OSHA and adjusted annually for inflation.
2 inspections, 1997 to 1997. Each row is one inspection; point at or tap a row for its dates and totals.
Source: DOL OSHA enforcement data (inspections and violations), linked via activity_nr (exact government key).
Penalty changes: Amounts shown reflect what OSHA's enforcement record publishes. The reason for any change is not stated unless OSHA's record explicitly says so.
Short cases: When a case closed soon after it opened, the closed marker is drawn slightly to the right so both markers stay visible. Each row's card shows the exact dates.