BOB MOORE FORD LINCOLN MAZDA INC
INTERSTATE 94 & HWY 210, FERGUS FALLS, MN 56537
Having inspection records is common for businesses in regulated industries. Data and methodology
Inspection records
Sep 17, 1985#2903102Sep 17, 1985Referral (C) · Partial scope, Health#2903102$01 viol.1 violation$0 in penalties
Inspection #2903102
Dates
- Opened
- Sep 17, 1985
- Closing Conference Date
- Jan 6, 1986
- Closed
- Jan 6, 1986
Inspection
- Advance Notice
- No
- Owner Type
- Private
- Union Status
- No
- Number of Employees
- 22
- Related Activity
- 1 referral
Violations and Penalties
- Total Violations
- 1
- Violation Types
- 1 other-than-serious
- Initial Penalties
- $0
- Penalties on Record
- $0
- Site Address
- Interstate 94 And Hwy 210 West, Fergus Falls, MN 56537
- Industry
- Not classified in OSHA's inspection record.
Referral Inspection: This inspection record is categorized as a referral inspection in the DOL OSHA enforcement data. Referral inspections can result from another agency, another OSHA activity, or another source referring a potential hazard to OSHA.
Violations
Violation list (1 of 1 shown)
| Citation | Standard | Type | Instances | Exposed | Initial | Current | Abatement | Contest | Final Order |
|---|---|---|---|---|---|---|---|---|---|
| 01001 | 5206070002 | Other | 1 | 8 | $0 | $0 | Dec 28, 1985 | - | - |
Jun 4, 1985#14909477Jun 4, 1985Follow-Up (F) · Partial scope, Safety#14909477$00 viol.0 violations$0 in penalties
Inspection #14909477
Dates
- Opened
- Jun 4, 1985
- Closing Conference Date
- Jun 4, 1985
- Closed
- Jun 4, 1985
Inspection
- Advance Notice
- No
- Owner Type
- Private
- Union Status
- No
- Number of Employees
- 23
Violations and Penalties
- Total Violations
- 0
- Initial Penalties
- $0
- Penalties on Record
- $0
- Site Address
- Interstate 94 & Hwy 210, Fergus Falls, MN 56537
- Industry
- Not classified in OSHA's inspection record.
Follow-Up Inspection: This inspection record is categorized as a follow-up inspection in the DOL OSHA enforcement data. Follow-up inspections are used by OSHA after earlier enforcement activity and can be used to check later compliance status.
Sep 25, 1984#14897185Sep 25, 1984Planned (H) · Complete scope, Safety#14897185$8410 viol.10 violations$84 in penalties
Inspection #14897185
Dates
- Opened
- Sep 25, 1984
- Closing Conference Date
- Sep 25, 1984
- Contested
- Nov 13, 1984
- Closed
- Jun 12, 1986
Inspection
- Advance Notice
- No
- Owner Type
- Private
- Union Status
- No
- Number of Employees
- 23
Violations and Penalties
- Total Violations
- 10
- Violation Types
- 3 repeat, 7 other-than-serious
- Initial Penalties
- $168
- Penalties on Record
- $84
- Site Address
- Interstate I 94 & Hwy 210, Fergus Falls, MN 56537
- Industry
- Not classified in OSHA's inspection record.
Planned Inspection: This inspection record is categorized as a planned inspection in the DOL OSHA enforcement data. Planned inspections are part of OSHA's scheduled enforcement activity rather than being opened directly from a complaint or reported incident at that worksite.
Enforcement Outcome
Citation contest activity appears on Nov 13, 1984. Final orders are recorded through Feb 13, 1985. Penalty changes shown on this page reflect the latest amounts published in OSHA's enforcement data.
Violations
Violation list (10 of 10 shown)
| Citation | Standard | Type | Instances | Exposed | Initial | Current | Abatement | Contest | Final Order |
|---|---|---|---|---|---|---|---|---|---|
| 01001 | 1910.106 Flammable Liquids OSHA citation code: 19100106 D04 IV | Repeat | 1 | 1 | $72 | $36 | Oct 25, 1984 | Nov 13, 1984 | Feb 13, 1985 |
| 01002 | 1910.107 Spray Finishing Using Flammable and Combustible Materials OSHA citation code: 19100107 B09 | Repeat | 1 | 1 | $48 | $24 | Oct 25, 1984 | Nov 13, 1984 | Feb 13, 1985 |
| 01003 | 1910.304 Electrical - Wiring Design and Protection OSHA citation code: 19100304 F05 V | Repeat | 1 | 1 | $48 | $24 | Oct 25, 1984 | Nov 13, 1984 | Feb 13, 1985 |
| 02001 | 1910.252 Welding, Cutting, and Brazing - General Requirements OSHA citation code: 19100252 A02 VB7 | Other | 1 | 1 | $0 | $0 | Oct 25, 1984 | - | - |
| 02002 | 1910.252 Welding, Cutting, and Brazing - General Requirements OSHA citation code: 19100252 B04 IXC | Other | 1 | 1 | $0 | $0 | Nov 6, 1984 | - | - |
| 02003 | 1910.106 Flammable Liquids OSHA citation code: 19100106 E02 IVA | Other | 1 | 1 | $0 | $0 | Oct 25, 1984 | - | - |
| 02004 | 1910.212 General Requirements for All Machines (Machine Guarding) OSHA citation code: 19100212 B | Other | 1 | 1 | $0 | $0 | Nov 6, 1984 | - | - |
| 02005 | 1910.215 Abrasive Wheel Machinery OSHA citation code: 19100215 A02 | Other | 1 | 1 | $0 | $0 | Nov 14, 1984 | - | - |
| 02006 | 1910.305 Electrical - Wiring Methods, Components, and Equipment OSHA citation code: 19100305 G02 III | Other | 1 | 1 | $0 | $0 | Nov 6, 1984 | - | - |
| 02007 | 1910.134 Respiratory Protection OSHA citation code: 19100134 A2 | Other | 1 | 1 | $0 | $0 | Nov 17, 1984 | - | - |
Failure to Abate Penalties2 citations
OSHA's enforcement record shows Failure to Abate (FTA) activity recorded against 2 citations issued in this inspection. An FTA penalty is assessed during a follow-up inspection when OSHA's records indicate a previously cited hazard was not corrected by the abatement date. Each row below shows the FTA fields published on the original citation record: the follow-up inspection number, the FTA issuance date, the FTA penalty amount, and any FTA contest or final order date on record.
Penalty amounts may differ from final amounts after settlement or judicial review. How to read these records
About these records
A company page groups inspections with the same normalized employer name, city and state; it is not a legal-entity identifier (how pages are grouped).
This page displays public OSHA enforcement data. Status text follows the DOL inspection record first and may include citation-level context when the inspection feed and citation records are out of sync. Penalty amounts shown reflect the latest penalty amounts on record in the DOL database and may differ from initial assessments or final amounts. This is not an official OSHA resource.
OSHA's public enforcement data does not publish a "guilty" or "not guilty" field for inspections. The closest outcome fields available are the citation counts, penalty amounts, contest dates, final-order dates, and the inspection close date shown on this page. How to interpret these status fields. How initial and current penalties are recorded.
OSHA may publish multiple citation rows in the same inspection with the same standard and penalty fields. Separate rows can still differ in OSHA metadata such as citation identifier, recorded instance count, exposed workers, or gravity value. Contest and Final Order columns show citation-level dates from OSHA's enforcement record. A dash means OSHA's record does not currently show that activity for the citation.
Source: U.S. Department of Labor OSHA enforcement data, violations table fields fta_insp_nr, fta_issuance_date, fta_penalty, fta_contest_date, fta_final_order_date. The FTA follow-up inspection is linked via fta_insp_nr to the inspection activity number (exact government key). When the follow-up inspection is not currently on record in SafetyRecord, the inspection number is shown without a link.
Understanding These Penalties
The maximum penalty for a serious violation in 2025 is $16,550 per violation. For willful violations, the range is $11,823 to $165,514. The current penalty column shows the latest amount on record in OSHA's database for each citation. When the current penalty differs from the initial penalty, OSHA's records show that the amount changed during the enforcement process, but this page does not determine the specific reason for each change. Penalty amounts are set by OSHA and adjusted annually for inflation.
3 inspections, 1984 to 1985. Each row is one inspection; point at or tap a row for its dates and totals.
Source: DOL OSHA enforcement data (inspections and violations), linked via activity_nr (exact government key).
Penalty changes: Amounts shown reflect what OSHA's enforcement record publishes. The reason for any change is not stated unless OSHA's record explicitly says so.
Short cases: When a case closed soon after it opened, the closed marker is drawn slightly to the right so both markers stay visible. Each row's card shows the exact dates.