Skip to content
SafetyRecord logoSafetyRecord
GEORGIA PACIFIC CORP
$480
penalties
23
viol.
8
insp.

GEORGIA PACIFIC CORP

ACME PLANT, Quanah, TX 79252

Inspections
8
Sep 1974 to Aug 1984 · 6 safety, 2 health
Violations
23
across 8 inspections
Penalties on record
$480
latest amounts in DOL records
By classification
Serious 4Willful 0Repeat 0Other 19

Having inspection records is common for businesses in regulated industries. Data and methodology

Inspection records

Aug 7, 1984Planned (H) · Complete scope, Health#1369255$3605 viol.

Inspection #1369255

Dates

Opened
Aug 7, 1984
Closing Conference Date
Aug 8, 1984
Closed
Nov 8, 1984

Inspection

Advance Notice
No
Owner Type
Private
Union Status
Yes
Number of Employees
224

Violations and Penalties

Total Violations
5
Violation Types
3 serious, 2 other-than-serious
Initial Penalties
$360
Penalties on Record
$360
Site Address
5 Miles West Of, Quanah, TX 79252
Industry
Not classified in OSHA's inspection record.

Planned Inspection: This inspection record is categorized as a planned inspection in the DOL OSHA enforcement data. Planned inspections are part of OSHA's scheduled enforcement activity rather than being opened directly from a complaint or reported incident at that worksite.

Chemical Exposure Sampling3 substances sampled

Air monitoring samples collected by OSHA during this inspection. Results grouped by substance.

SubstanceSamplesResult RangeUnit
Particulates not otherwise regulated (Respirable Fraction)20.138 - 0.354mg/m³
Particulates not otherwise regulated (Total Dust)50.552 - 3.011mg/m³
Silica, Crystalline Quartz (Respirable Fraction)70 - 17

Violations

Violation list (5 of 5 shown)
CitationStandardTypeInstancesExposedInitialCurrentAbatementContestFinal Order
010011910.95
Occupational Noise Exposure
OSHA citation code: 19100095 B01
Other11$0$0Oct 3, 1984--
010021910.95
Occupational Noise Exposure
OSHA citation code: 19100095 K03 II
Other11$0$0Aug 29, 1984--
02001A1910.134
Respiratory Protection
OSHA citation code: 19100134 A02
Serious-1$360$360Sep 12, 1984--
02001B1910.1000
Air Contaminants
OSHA citation code: 19101000 C
Serious11$0$0Feb 5, 1985--
02001C1910.1000
Air Contaminants
OSHA citation code: 19101000 A
Serious11$0$0Feb 5, 1985--
Aug 31, 1977Follow-Up (F) · Partial scope, Safety#16441008$00 viol.

Inspection #16441008

Dates

Opened
Aug 31, 1977
Closing Conference Date
Aug 31, 1977
Closed
Mar 10, 1984

Inspection

Advance Notice
Not recorded
Owner Type
Not recorded
Union Status
Yes
Number of Employees
224

Violations and Penalties

Total Violations
0
Initial Penalties
$0
Penalties on Record
$0
Site Address
Acme Plant, Quanah, TX 79252
Industry
Not classified in OSHA's inspection record.

Follow-Up Inspection: This inspection record is categorized as a follow-up inspection in the DOL OSHA enforcement data. Follow-up inspections are used by OSHA after earlier enforcement activity and can be used to check later compliance status.

May 31, 1977Accident (A) · Partial scope, Safety#16545055$01 viol.

Inspection #16545055

Dates

Opened
May 31, 1977
Closing Conference Date
Jun 1, 1977
Closed
Sep 6, 1977

Inspection

Advance Notice
Not recorded
Owner Type
Not recorded
Union Status
Yes
Number of Employees
224
Related Activity
1 accident

Violations and Penalties

Total Violations
1
Violation Types
1 serious
Initial Penalties
$630
Penalties on Record
$0
Site Address
Acme Plant, Quanah, TX 79252
Industry
Not classified in OSHA's inspection record.

Accident Inspection: This inspection record is categorized as an accident inspection in the U.S. Department of Labor OSHA enforcement data. Employers must report work-related fatalities within 8 hours, and work-related inpatient hospitalizations, amputations, or losses of an eye within 24 hours. An accident-related inspection does not by itself determine fault.

Violations

Violation list (1 of 1 shown)
CitationStandardTypeInstancesExposedInitialCurrentAbatementContestFinal Order
010011910.212
General Requirements for All Machines (Machine Guarding)
OSHA citation code: 19100212 A01
Serious2-$630$0Jul 29, 1977--

Failure to Abate Penalties1 citation, $315 in FTA penalties on record

OSHA's enforcement record shows Failure to Abate (FTA) activity recorded against 1 citation issued in this inspection. An FTA penalty is assessed during a follow-up inspection when OSHA's records indicate a previously cited hazard was not corrected by the abatement date. Each row below shows the FTA fields published on the original citation record: the follow-up inspection number, the FTA issuance date, the FTA penalty amount, and any FTA contest or final order date on record.

CitationFTA InspectionFTA IssuanceFTA PenaltyFTA ContestFTA Final Order
01001-Jul 29, 1977$315--
Aug 26, 1975Accident (A) · Complete scope, Safety#16427619$00 viol.

Inspection #16427619

Dates

Opened
Aug 26, 1975
Closing Conference Date
Aug 27, 1975
Closed
Mar 10, 1984

Inspection

Advance Notice
Not recorded
Owner Type
Not recorded
Union Status
Yes
Number of Employees
180
Related Activity
1 accident

Violations and Penalties

Total Violations
0
Initial Penalties
$0
Penalties on Record
$0
Site Address
Highway 287 West, Quanah, TX 79252
Industry
Not classified in OSHA's inspection record.

Accident Inspection: This inspection record is categorized as an accident inspection in the U.S. Department of Labor OSHA enforcement data. Employers must report work-related fatalities within 8 hours, and work-related inpatient hospitalizations, amputations, or losses of an eye within 24 hours. An accident-related inspection does not by itself determine fault.

Jan 6, 1975Follow-Up (F) · Complete scope, Safety#16487126$00 viol.

Inspection #16487126

Dates

Opened
Jan 6, 1975
Closing Conference Date
Jan 6, 1975
Closed
Mar 10, 1984

Inspection

Advance Notice
Not recorded
Owner Type
Not recorded
Union Status
No
Number of Employees
210

Violations and Penalties

Total Violations
0
Initial Penalties
$0
Penalties on Record
$0
Site Address
Acme Texas 5 Mi North Of Quana, Quanah, TX 79252
Industry
Not classified in OSHA's inspection record.

Follow-Up Inspection: This inspection record is categorized as a follow-up inspection in the DOL OSHA enforcement data. Follow-up inspections are used by OSHA after earlier enforcement activity and can be used to check later compliance status.

Oct 29, 1974Follow-Up (F) · Complete scope, Safety#16509879$00 viol.

Inspection #16509879

Dates

Opened
Oct 29, 1974
Closing Conference Date
Oct 29, 1974
Closed
Mar 10, 1984

Inspection

Advance Notice
Not recorded
Owner Type
Not recorded
Union Status
Not displayed
Number of Employees
210

Violations and Penalties

Total Violations
0
Initial Penalties
$0
Penalties on Record
$0
Site Address
Acme Texas Gypsum Board Plant, Quanah, TX 79252
Industry
Not classified in OSHA's inspection record.

Follow-Up Inspection: This inspection record is categorized as a follow-up inspection in the DOL OSHA enforcement data. Follow-up inspections are used by OSHA after earlier enforcement activity and can be used to check later compliance status.

Oct 23, 1974Planned (H) · Complete scope, Health#16486896$1203 viol.

Inspection #16486896

Dates

Opened
Oct 23, 1974
Closing Conference Date
Oct 23, 1974
Closed
Mar 10, 1984

Inspection

Advance Notice
Not recorded
Owner Type
Not recorded
Union Status
Not displayed
Number of Employees
210

Violations and Penalties

Total Violations
3
Violation Types
3 other-than-serious
Initial Penalties
$120
Penalties on Record
$120
Site Address
5 Miles North Quana, Quanah, TX 79252
Industry
Not classified in OSHA's inspection record.

Planned Inspection: This inspection record is categorized as a planned inspection in the DOL OSHA enforcement data. Planned inspections are part of OSHA's scheduled enforcement activity rather than being opened directly from a complaint or reported incident at that worksite.

Violations

Violation list (3 of 3 shown)
CitationStandardTypeInstancesExposedInitialCurrentAbatementContestFinal Order
010011910.95
Occupational Noise Exposure
OSHA citation code: 19100095 A
Other15-$60$60Dec 26, 1974--
010021910.95
Occupational Noise Exposure
OSHA citation code: 19100095 B01
Other15-$60$60Oct 6, 1975--
010031910.95
Occupational Noise Exposure
OSHA citation code: 19100095 B03
Other15-$0$0Dec 26, 1974--
Sep 25, 1974Planned (H) · Complete scope, Safety#16459158$014 viol.

Inspection #16459158

Dates

Opened
Sep 25, 1974
Closing Conference Date
Sep 25, 1974
Closed
Mar 10, 1984

Inspection

Advance Notice
Not recorded
Owner Type
Not recorded
Union Status
Not displayed
Number of Employees
210

Violations and Penalties

Total Violations
14
Violation Types
14 other-than-serious
Initial Penalties
$0
Penalties on Record
$0
Site Address
Acme Texas, Quanah, TX 79252
Industry
Not classified in OSHA's inspection record.

Planned Inspection: This inspection record is categorized as a planned inspection in the DOL OSHA enforcement data. Planned inspections are part of OSHA's scheduled enforcement activity rather than being opened directly from a complaint or reported incident at that worksite.

Violations

Violation list (6 of 14 shown)
CitationStandardTypeInstancesExposedInitialCurrentAbatementContestFinal Order
010011910.23
Ladders
OSHA citation code: 19100023 C02
Other4-$0$0Oct 24, 1974--
010021910.24
Step Bolts and Manhole Steps
OSHA citation code: 19100024 H
Other4-$0$0Oct 24, 1974--
010031910.37
Maintenance, Safeguards, and Operational Features for Exit Routes
OSHA citation code: 19100037 K02
Other2-$0$0Oct 24, 1974--
010041910.169
Air Receivers
OSHA citation code: 19100169 B03 I
Other1-$0$0Oct 24, 1974--
010051910.213
Woodworking Machinery Requirements
OSHA citation code: 19100213 B03
Other1-$0$0Oct 24, 1974--
010061910.213
Woodworking Machinery Requirements
OSHA citation code: 19100213 H01
Other1-$0$0Oct 24, 1974--

Showing the 6 violations listed first by citation identifier. This inspection has 14 total violations documented in the U.S. Department of Labor OSHA enforcement database. The complete violation list is available at enforcedata.dol.gov.

Inspections 1 to 8 of 8, newest first

Penalty amounts may differ from final amounts after settlement or judicial review. How to read these records

About these records

A company page groups inspections with the same normalized employer name, city and state; it is not a legal-entity identifier (how pages are grouped).

This page displays public OSHA enforcement data. Status text follows the DOL inspection record first and may include citation-level context when the inspection feed and citation records are out of sync. Penalty amounts shown reflect the latest penalty amounts on record in the DOL database and may differ from initial assessments or final amounts. This is not an official OSHA resource.

OSHA's public enforcement data does not publish a "guilty" or "not guilty" field for inspections. The closest outcome fields available are the citation counts, penalty amounts, contest dates, final-order dates, and the inspection close date shown on this page. How to interpret these status fields. How initial and current penalties are recorded.

OSHA may publish multiple citation rows in the same inspection with the same standard and penalty fields. Separate rows can still differ in OSHA metadata such as citation identifier, recorded instance count, exposed workers, or gravity value. Contest and Final Order columns show citation-level dates from OSHA's enforcement record. A dash means OSHA's record does not currently show that activity for the citation.

Source: OSHA chemical exposure sampling data (OSHA Information System). P = Personal (worker breathing zone), A = Area (general air). Rows marked QC are analytical quality control measurements, not chemical exposures. OSHA PEL (Permissible Exposure Limit) values from the OSHA Occupational Chemical Database, matched via IMIS substance code (analyte code) (exact government key).

Source: U.S. Department of Labor OSHA enforcement data, violations table fields fta_insp_nr, fta_issuance_date, fta_penalty, fta_contest_date, fta_final_order_date. The FTA follow-up inspection is linked via fta_insp_nr to the inspection activity number (exact government key). When the follow-up inspection is not currently on record in SafetyRecord, the inspection number is shown without a link.

Understanding These Penalties

The maximum penalty for a serious violation in 2025 is $16,550 per violation. For willful violations, the range is $11,823 to $165,514. The current penalty column shows the latest amount on record in OSHA's database for each citation. When the current penalty differs from the initial penalty, OSHA's records show that the amount changed during the enforcement process, but this page does not determine the specific reason for each change. Penalty amounts are set by OSHA and adjusted annually for inflation.

Standards cited

1910.95Occupational Noise Exposure5 citations · $120
1910.213Woodworking Machinery Requirements3 citations · $0
1910.219Mechanical Power-Transmission Apparatus3 citations · $0

Chemical exposure sampling

Samples
14
Substances
3
Inspections
1

Other inspected employers in Quanah, TX

All employers in Quanah →