M & R METAL TREATING CO., INC.
3085 INDIANA AVENUE, WINSTON-SALEM, NC 27105
Having inspection records is common for businesses in regulated industries. Data and methodology
Inspection records
Aug 2, 1987#2984219Aug 2, 1987Follow-Up (F) · Partial scope, Safety#2984219$00 viol.0 violations$0 in penalties
Inspection #2984219
Dates
- Opened
- Aug 2, 1987
- Closing Conference Date
- Aug 7, 1987
- Closed
- Aug 7, 1987
Inspection
- Advance Notice
- No
- Owner Type
- Private
- Union Status
- No
- Number of Employees
- 6
Violations and Penalties
- Total Violations
- 0
- Initial Penalties
- $0
- Penalties on Record
- $0
- Site Address
- 3085 Indiana Avenue, Winston-Salem, NC 27105
- Industry
- Not classified in OSHA's inspection record.
Follow-Up Inspection: This inspection record is categorized as a follow-up inspection in the DOL OSHA enforcement data. Follow-up inspections are used by OSHA after earlier enforcement activity and can be used to check later compliance status.
Nov 17, 1986#3021284Nov 17, 1986Follow-Up (F) · Partial scope, Safety#3021284$00 viol.0 violations$0 in penalties
Inspection #3021284
Dates
- Opened
- Nov 17, 1986
- Closing Conference Date
- Nov 17, 1986
- Closed
- Nov 17, 1986
Inspection
- Advance Notice
- No
- Owner Type
- Private
- Union Status
- No
- Number of Employees
- 6
- Related Activity
- 1 referral
Violations and Penalties
- Total Violations
- 0
- Initial Penalties
- $0
- Penalties on Record
- $0
- Site Address
- 3085 Indiana Avenue, Winston-Salem, NC 27105
- Industry
- Not classified in OSHA's inspection record.
Follow-Up Inspection: This inspection record is categorized as a follow-up inspection in the DOL OSHA enforcement data. Follow-up inspections are used by OSHA after earlier enforcement activity and can be used to check later compliance status.
Jul 21, 1986#3021979Jul 21, 1986Referral (C) · Complete scope, Safety#3021979$28016 viol.16 violations$280 in penalties
Inspection #3021979
Dates
- Opened
- Jul 21, 1986
- Closing Conference Date
- Aug 5, 1986
- Closed
- Nov 16, 1993
Inspection
- Advance Notice
- No
- Owner Type
- Private
- Union Status
- No
- Number of Employees
- 4
- Related Activity
- 1 referral
Violations and Penalties
- Total Violations
- 16
- Violation Types
- 4 serious, 12 other-than-serious
- Initial Penalties
- $280
- Penalties on Record
- $280
- Site Address
- 3085 Indiana Avenue, Winston-Salem, NC 27105
- Industry
- Not classified in OSHA's inspection record.
Referral Inspection: This inspection record is categorized as a referral inspection in the DOL OSHA enforcement data. Referral inspections can result from another agency, another OSHA activity, or another source referring a potential hazard to OSHA.
Violations
Violation list (16 of 16 shown)
| Citation | Standard | Type | Instances | Exposed | Initial | Current | Abatement | Contest | Final Order |
|---|---|---|---|---|---|---|---|---|---|
| 01001 | 1910.133 Eye and Face Protection OSHA citation code: 19100133 A01 | Serious | 1 | 2 | $60 | $60 | Oct 6, 1986 | - | - |
| 01002 | 1910.151 Medical Services and First Aid OSHA citation code: 19100151 C | Serious | 1 | 2 | $60 | $60 | Oct 6, 1986 | - | - |
| 01003 | 1910.219 Mechanical Power-Transmission Apparatus OSHA citation code: 19100219 E01 I | Serious | 1 | 2 | $60 | $60 | Oct 6, 1986 | - | - |
| 01004 | 1910.303 Electrical - General Requirements OSHA citation code: 19100303 G02 | Serious | 1 | 2 | $100 | $100 | Oct 6, 1986 | - | - |
| 02001 | 1910.22 Walking-Working Surfaces - General Requirements OSHA citation code: 19100022 A02 | Other | 1 | 2 | $0 | $0 | Oct 6, 1986 | - | - |
| 02002 | 1910.36 Design and Construction Requirements for Exit Routes OSHA citation code: 19100036 B08 | Other | 1 | 4 | $0 | $0 | Nov 5, 1986 | - | - |
| 02003 | 1910.37 Maintenance, Safeguards, and Operational Features for Exit Routes OSHA citation code: 19100037 Q01 | Other | 1 | 4 | $0 | $0 | Oct 6, 1986 | - | - |
| 02004 | 1910.94 Ventilation OSHA citation code: 19100094 D09 IX | Other | 1 | 2 | $0 | $0 | Oct 6, 1986 | - | - |
| 02005 | 1910.157 Portable Fire Extinguishers OSHA citation code: 19100157 C04 | Other | 2 | 4 | $0 | $0 | Oct 6, 1986 | - | - |
| 02006 | 1910.178 Powered Industrial Trucks OSHA citation code: 19100178 L | Other | 1 | 2 | $0 | $0 | Oct 6, 1986 | - | - |
| 02007 | 1910.212 General Requirements for All Machines (Machine Guarding) OSHA citation code: 19100212 A05 | Other | 1 | 2 | $0 | $0 | Oct 6, 1986 | - | - |
| 02008 | 1910.252 Welding, Cutting, and Brazing - General Requirements OSHA citation code: 19100252 A02 IVC | Other | 1 | 2 | $0 | $0 | Oct 6, 1986 | - | - |
| 02009 | 1910.304 Electrical - Wiring Design and Protection OSHA citation code: 19100304 F04 | Other | 1 | 2 | $0 | $0 | Oct 6, 1986 | - | - |
| 02010 | 1910.305 Electrical - Wiring Methods, Components, and Equipment OSHA citation code: 19100305 A01 I | Other | 1 | 2 | $0 | $0 | Nov 5, 1986 | - | - |
| 02011 | 1910.305 Electrical - Wiring Methods, Components, and Equipment OSHA citation code: 19100305 A02 IIIG | Other | 1 | 2 | $0 | $0 | Nov 5, 1986 | - | - |
| 02012 | 1910.305 Electrical - Wiring Methods, Components, and Equipment OSHA citation code: 19100305 B02 | Other | 2 | 2 | $0 | $0 | Nov 5, 1986 | - | - |
Failure to Abate Penalties1 citation, $450 in FTA penalties on record
OSHA's enforcement record shows Failure to Abate (FTA) activity recorded against 1 citation issued in this inspection. An FTA penalty is assessed during a follow-up inspection when OSHA's records indicate a previously cited hazard was not corrected by the abatement date. Each row below shows the FTA fields published on the original citation record: the follow-up inspection number, the FTA issuance date, the FTA penalty amount, and any FTA contest or final order date on record.
| Citation | FTA Inspection | FTA Issuance | FTA Penalty | FTA Contest | FTA Final Order |
|---|---|---|---|---|---|
| 01002 | #3021284 | Feb 6, 1987 | $450 | Mar 17, 1987 | May 13, 1987 |
Penalty amounts may differ from final amounts after settlement or judicial review. How to read these records
About these records
A company page groups inspections with the same normalized employer name, city and state; it is not a legal-entity identifier (how pages are grouped).
This page displays public OSHA enforcement data. Status text follows the DOL inspection record first and may include citation-level context when the inspection feed and citation records are out of sync. Penalty amounts shown reflect the latest penalty amounts on record in the DOL database and may differ from initial assessments or final amounts. This is not an official OSHA resource.
OSHA's public enforcement data does not publish a "guilty" or "not guilty" field for inspections. The closest outcome fields available are the citation counts, penalty amounts, contest dates, final-order dates, and the inspection close date shown on this page. How to interpret these status fields. How initial and current penalties are recorded.
OSHA may publish multiple citation rows in the same inspection with the same standard and penalty fields. Separate rows can still differ in OSHA metadata such as citation identifier, recorded instance count, exposed workers, or gravity value. Contest and Final Order columns show citation-level dates from OSHA's enforcement record. A dash means OSHA's record does not currently show that activity for the citation.
Source: U.S. Department of Labor OSHA enforcement data, violations table fields fta_insp_nr, fta_issuance_date, fta_penalty, fta_contest_date, fta_final_order_date. The FTA follow-up inspection is linked via fta_insp_nr to the inspection activity number (exact government key). When the follow-up inspection is not currently on record in SafetyRecord, the inspection number is shown without a link.
Understanding These Penalties
The maximum penalty for a serious violation in 2025 is $16,550 per violation. For willful violations, the range is $11,823 to $165,514. The current penalty column shows the latest amount on record in OSHA's database for each citation. When the current penalty differs from the initial penalty, OSHA's records show that the amount changed during the enforcement process, but this page does not determine the specific reason for each change. Penalty amounts are set by OSHA and adjusted annually for inflation.
3 inspections, 1986 to 1987. Each row is one inspection; point at or tap a row for its dates and totals.
Source: DOL OSHA enforcement data (inspections and violations), linked via activity_nr (exact government key).
Penalty changes: Amounts shown reflect what OSHA's enforcement record publishes. The reason for any change is not stated unless OSHA's record explicitly says so.
Short cases: When a case closed soon after it opened, the closed marker is drawn slightly to the right so both markers stay visible. Each row's card shows the exact dates.