Skip to content
SafetyRecord logoSafetyRecord

Inspection #306657552

Closed

This page displays public OSHA enforcement data. Status text follows the DOL inspection record first and may include citation-level context when the inspection feed and citation records are out of sync. Penalty amounts shown reflect the latest penalty amounts on record in the DOL database and may differ from initial assessments or final amounts. This is not an official OSHA resource.

The Occupational Safety and Health Administration (OSHA) conducted a accident inspection of V & B INTERNATIONAL INC at 5078 Rodney Road, Port Gibson, MS 39150 on Nov 16, 2004. The inspection scope was complete. The case was closed on Jul 3, 2012.

OSHA documented 28 violations (22 serious, 2 willful, 1 repeat, 3 other-than-serious) with total penalties on record of $35,000. 1 incident investigation summary is associated with this inspection. This inspection is linked to 1 accident report in OSHA records.

This employer has 8 other OSHA inspections on record at this establishment.

Inspection Details

Inspection Number
306657552
Type
Accident (A)
Scope
Complete
Opened
Nov 16, 2004
Closed
Jul 3, 2012
Contested
Jun 3, 2005
Final Order
Nov 18, 2005
Total Violations
28
Penalties on Record
$35,000
Initial Penalties
$45,800
Related Activity
1 accident
Accident Inspection: This inspection record is categorized as an accident inspection in the U.S. Department of Labor OSHA enforcement data. Employers must report work-related fatalities within 8 hours, and work-related inpatient hospitalizations, amputations, or losses of an eye within 24 hours. An accident-related inspection does not by itself determine fault.

Establishment

Address
5078 Rodney Road, Port Gibson, MS 39150
Industry
321113 Sawmills

Other Inspections of This Employer8 on record

Other OSHA inspections of the same establishment. Linked via establishment ID (exact government key).

Incident Investigation Summaries

Incident investigation summaries linked to this inspection through OSHA's accident and injury enforcement data. These summaries describe the reported incident. The enforcement outcome for the linked inspection appears immediately below.

FatalityNov 16, 2004

Employee is killed while changing chipper knives

Injury: ConcussionBody part: Head

Source: U.S. Department of Labor OSHA incident investigation data (`osha_accident` + `osha_accident_injury`). Linked via `rel_insp_nr` to the inspection activity number (exact government key).

Enforcement Outcome

OSHA's public enforcement data does not publish a "guilty" or "not guilty" field for inspections. The closest outcome fields available are the citation counts, penalty amounts, contest dates, final-order dates, and the inspection close date shown on this page.

Status on Record
Closed

Inspection closed Jul 3, 2012.

Citations on Record
28

22 serious, 2 willful, 1 repeat, 3 other-than-serious.

Initial Penalties
$45,800

Citation amounts as first recorded in OSHA's penalty fields.

Current Penalties
$35,000

Latest published amounts after changes in the enforcement process.

Citation contest activity appears on Jun 3, 2005. Final orders are recorded through Nov 18, 2005. Penalty changes shown on this page reflect the latest amounts published in OSHA's enforcement data.

Violations

OSHA may publish multiple citation rows in the same inspection with the same standard and penalty fields. Separate rows can still differ in OSHA metadata such as citation identifier, recorded instance count, exposed workers, or gravity value. Contest and Final Order columns show citation-level dates from OSHA's enforcement record. A dash means OSHA's record does not currently show that activity for the citation.

CitationStandardTypeInitialCurrentAbatementContestFinal Order
01004C1910.219
Mechanical Power-Transmission Apparatus
OSHA citation code: 19100219 D01
Serious$0$100May 24, 2005Jun 3, 2005Nov 18, 2005
01004D1910.219
Mechanical Power-Transmission Apparatus
OSHA citation code: 19100219 E03 I
Serious$0$0May 24, 2005Jun 3, 2005Nov 18, 2005
01004E1910.219
Mechanical Power-Transmission Apparatus
OSHA citation code: 19100219 D01
Serious$0$0May 24, 2005Jun 3, 2005Nov 18, 2005
01004F1910.219
Mechanical Power-Transmission Apparatus
OSHA citation code: 19100219 E03 I
Serious$0$0May 24, 2005Jun 3, 2005Nov 18, 2005
01004G1910.219
Mechanical Power-Transmission Apparatus
OSHA citation code: 19100219 D01
Serious$0$0May 24, 2005Jun 3, 2005Nov 18, 2005
01004H1910.219
Mechanical Power-Transmission Apparatus
OSHA citation code: 19100219 E03 I
Serious$0$0May 24, 2005Jun 3, 2005Nov 18, 2005
01004I1910.219
Mechanical Power-Transmission Apparatus
OSHA citation code: 19100219 D01
Serious$0$0May 24, 2005Jun 3, 2005Nov 18, 2005
01004J1910.219
Mechanical Power-Transmission Apparatus
OSHA citation code: 19100219 E03 I
Serious$0$0May 24, 2005Jun 3, 2005Nov 18, 2005
01004K1910.219
Mechanical Power-Transmission Apparatus
OSHA citation code: 19100219 D01
Serious$0$0May 24, 2005Jun 3, 2005Nov 18, 2005
01004L1910.219
Mechanical Power-Transmission Apparatus
OSHA citation code: 19100219 E03 I
Serious$0$0May 24, 2005Jun 3, 2005Nov 18, 2005
01004M1910.219
Mechanical Power-Transmission Apparatus
OSHA citation code: 19100219 D01
Serious$0$0May 24, 2005Jun 3, 2005Nov 18, 2005
01004N1910.219
Mechanical Power-Transmission Apparatus
OSHA citation code: 19100219 E03 I
Serious$0$0May 24, 2005Jun 3, 2005Nov 18, 2005
010051910.219
Mechanical Power-Transmission Apparatus
OSHA citation code: 19100219 F03
Serious$1,000$100May 24, 2005Jun 3, 2005Nov 18, 2005
010061910.219
Mechanical Power-Transmission Apparatus
OSHA citation code: 19100219 I02
Serious$1,000$100May 24, 2005Jun 3, 2005Nov 18, 2005
010071910.265
Sawmills
OSHA citation code: 19100265 C18 I
Serious$1,000$100May 18, 2005Jun 3, 2005Nov 18, 2005
010091910.303
Electrical - General Requirements
OSHA citation code: 19100303 F
Serious$5,600$100May 17, 2005Jun 3, 2005Nov 18, 2005
01011A1910.1200
Hazard Communication
OSHA citation code: 19101200 F05 I
Serious$1,000$100May 24, 2005Jun 3, 2005Nov 18, 2005
01011B1910.1200
Hazard Communication
OSHA citation code: 19101200 F05 II
Serious$0$0May 24, 2005Jun 3, 2005Nov 18, 2005
01012A1910.147
Control of Hazardous Energy (Lockout/Tagout)
OSHA citation code: 19100147 C06 I
Serious$100$100Jun 8, 2005-Nov 18, 2005
01012B1910.147
Control of Hazardous Energy (Lockout/Tagout)
OSHA citation code: 19100147 C07 I
Serious$0$0Jun 8, 2005-Nov 18, 2005
01013A1910.178
Powered Industrial Trucks
OSHA citation code: 19100178 P01
Serious$100$100May 24, 2005-Nov 18, 2005
01013B1910.265
Sawmills
OSHA citation code: 19100265 C30 II
Serious$0$0May 24, 2005-Nov 18, 2005
02003A1910.147
Control of Hazardous Energy (Lockout/Tagout)
OSHA citation code: 19100147 C04 IIB
Willful$34,000$34,000Jun 8, 2005-Nov 18, 2005
02003B1910.147
Control of Hazardous Energy (Lockout/Tagout)
OSHA citation code: 19100147 C05 I
Willful$0$0Jun 8, 2005-Nov 18, 2005
030011910.304
Electrical - Wiring Design and Protection
OSHA citation code: 19100304 F04
Repeat$2,000$200May 18, 2005Jun 3, 2005Nov 18, 2005
040011910.106
Flammable Liquids
OSHA citation code: 19100106 B02 VIIA
Other$0$0Jun 29, 2005Jun 3, 2005Nov 18, 2005
04002A1910.219
Mechanical Power-Transmission Apparatus
OSHA citation code: 19100219 D01
Other$0$0May 18, 2005-Nov 18, 2005
04002B1910.219
Mechanical Power-Transmission Apparatus
OSHA citation code: 19100219 E01 I
Other$0$0May 18, 2005-Nov 18, 2005

Understanding These Penalties

The maximum penalty for a serious violation in 2025 is $16,550 per violation. For willful violations, the range is $11,823 to $165,514. The current penalty column shows the latest amount on record in OSHA's database for each citation. When the current penalty differs from the initial penalty, OSHA's records show that the amount changed during the enforcement process, but this page does not determine the specific reason for each change. Penalty amounts are set by OSHA and adjusted annually for inflation.

Data Source and Methodology

Data synced daily

Data on this page comes from the U.S. Department of Labor's OSHA enforcement database, accessed via the DOL public data API. Records are updated daily. We strive for accuracy, but errors in data processing or establishment grouping are possible. Penalty amounts reflect the latest penalty amounts on record in the DOL database and may differ from initial assessments or final amounts after informal conference, settlement, or judicial review. Company pages group inspection records by normalized employer name, city, and state as reported in OSHA records. That grouping is deterministic and non-fuzzy, but it is not a universal legal-entity identifier. On inspection pages, the status display follows the DOL inspection record first. If the DOL inspection feed includes a close date, we show the inspection as closed. If the inspection feed has no close date but all citation records tied to that inspection show a final order date, we label the page "Final Order Recorded" and disclose the citation dates instead of inferring a close date. Chemical exposure sampling data and OSHA Permissible Exposure Limits (PELs) are sourced from the OSHA Occupational Chemical Database, matched via IMIS analyte codes. If you believe any record is inaccurate, please report it and we will investigate. This product uses the DOL Data API but is not endorsed or certified by the DOL. For official and authoritative records, visit osha.gov.