DERONDE PRODUCTS INC
200 CORNWALL AVE, BUFFALO, NY 14215
Having inspection records is common for businesses in regulated industries. Data and methodology
Inspection records
Jan 11, 2006#309639177Jan 11, 2006Follow-Up (F) · Partial scope, Safety#309639177$00 viol.0 violations$0 in penalties
Inspection #309639177
Dates
- Opened
- Jan 11, 2006
- Closing Conference Date
- Jan 13, 2006
- Closed
- Jan 13, 2006
Inspection
- Advance Notice
- No
- Owner Type
- Private
- Union Status
- No
- Number of Employees
- 20
Violations and Penalties
- Total Violations
- 0
- Initial Penalties
- $0
- Penalties on Record
- $0
- Site Address
- 200 Cornwall Ave, Buffalo, NY 14215
- Industry
- 332321 Metal Window and Door Manufacturing
Follow-Up Inspection: This inspection record is categorized as a follow-up inspection in the DOL OSHA enforcement data. Follow-up inspections are used by OSHA after earlier enforcement activity and can be used to check later compliance status.
Nov 4, 2005#309391092Nov 4, 2005Referral (C) · Partial scope, Health#309391092$3751 viol.1 violation$375 in penalties
Inspection #309391092
Dates
- Opened
- Nov 4, 2005
- Closing Conference Date
- Nov 7, 2005
- Closed
- May 26, 2006
Inspection
- Advance Notice
- No
- Owner Type
- Private
- Union Status
- No
- Number of Employees
- 20
- Related Activity
- 1 referral
Violations and Penalties
- Total Violations
- 1
- Violation Types
- 1 serious
- Initial Penalties
- $625
- Penalties on Record
- $375
- Site Address
- 200 Cornwall Ave, Buffalo, NY 14215
- Industry
- 332321 Metal Window and Door Manufacturing
Referral Inspection: This inspection record is categorized as a referral inspection in the DOL OSHA enforcement data. Referral inspections can result from another agency, another OSHA activity, or another source referring a potential hazard to OSHA.
Chemical Exposure Sampling13 substances sampled
Air monitoring samples collected by OSHA during this inspection. Results grouped by substance.
| Substance | Samples | Result Range | Unit |
|---|---|---|---|
| Antimony and Compounds (as Sb) | 1 | 0 | mg/m³ |
| Beryllium and Beryllium Compounds (as Be) | 1 | 0 | mg/m³ |
| Cadmium | 1 | 0 | mg/m³ |
| Chromium, Metal and Insoluble Salts | 1 | 0.0296711 | mg/m³ |
| Cobalt, Metal, Dust and Fume (as Co) | 1 | 0 | mg/m³ |
| Copper Fume (as Cu) | 1 | 0.0039539 | mg/m³ |
| Iron Oxide Fume | 1 | 0.9544857 | mg/m³ |
| Lead, Inorganic (as Pb) | 1 | 0 | mg/m³ |
| Manganese Fume (as Mn) | 1 | 0.0284605 | mg/m³ |
| Molybdenum (as Mo), Insoluble Compounds (Total Dust) | 1 | 0 | mg/m³ |
| Nickel, Metal and Insoluble compounds (as Ni) | 1 | 0 | mg/m³ |
| Vanadium fume (as V2O5) | 1 | 0 | mg/m³ |
| Zinc Oxide Fume | 1 | 0.3567867 | mg/m³ |
Violations
Violation list (1 of 1 shown)
| Citation | Standard | Type | Instances | Exposed | Initial | Current | Abatement | Contest | Final Order |
|---|---|---|---|---|---|---|---|---|---|
| 01001 | 1910.242 Hand and Portable Powered Tools and Equipment, General OSHA citation code: 19100242 B | Serious | 1 | 1 | $625 | $375 | Nov 7, 2006 | - | - |
Oct 20, 2005#309308369Oct 20, 2005Complaint (B) · Partial scope, Safety#309308369$3,60010 viol.10 violations$3,600 in penalties
Inspection #309308369
Dates
- Opened
- Oct 20, 2005
- Closing Conference Date
- Oct 20, 2005
- Closed
- May 30, 2007
Inspection
- Advance Notice
- No
- Owner Type
- Private
- Union Status
- No
- Number of Employees
- 20
- Related Activity
- 1 complaint
Violations and Penalties
- Total Violations
- 10
- Violation Types
- 7 serious, 3 other-than-serious
- Initial Penalties
- $6,000
- Penalties on Record
- $3,600
- Site Address
- 200 Cornwall Ave, Buffalo, NY 14215
- Industry
- 332321 Metal Window and Door Manufacturing
Complaint Inspection: This inspection record is categorized as a complaint inspection in the DOL OSHA enforcement data. OSHA can open complaint-driven inspections after receiving safety or health complaints from workers or their representatives.
Violations
Violation list (10 of 10 shown)
| Citation | Standard | Type | Instances | Exposed | Initial | Current | Abatement | Contest | Final Order |
|---|---|---|---|---|---|---|---|---|---|
| 01001A | 1910.107 Spray Finishing Using Flammable and Combustible Materials OSHA citation code: 19100107 B05 I | Serious | 1 | 1 | $1,000 | $600 | Dec 30, 2005 | - | - |
| 01001B | 1910.107 Spray Finishing Using Flammable and Combustible Materials OSHA citation code: 19100107 B05 I | Serious | 1 | 2 | $0 | $0 | Dec 30, 2005 | - | - |
| 01003 | 1910.160 Fixed Extinguishing Systems, General OSHA citation code: 19100160 B06 | Serious | 1 | 2 | $1,000 | $600 | Nov 30, 2005 | - | - |
| 01004 | 1910.303 Electrical - General Requirements OSHA citation code: 19100303 B01 | Serious | 1 | 3 | $1,000 | $600 | Nov 30, 2005 | - | - |
| 01005 | 1910.303 Electrical - General Requirements OSHA citation code: 19100303 G02 I | Serious | 1 | 2 | $2,000 | $1,200 | Nov 30, 2005 | - | - |
| 01006A | 1910.134 Respiratory Protection OSHA citation code: 19100134 E01 | Serious | 1 | 2 | $1,000 | $600 | Nov 30, 2005 | - | - |
| 01006B | 1910.134 Respiratory Protection OSHA citation code: 19100134 E01 | Serious | 1 | 2 | $0 | $0 | Nov 30, 2005 | - | - |
| 02001 | 1910.134 Respiratory Protection OSHA citation code: 19100134 C01 | Other | 1 | 2 | $0 | $0 | Nov 30, 2005 | - | - |
| 02002 | 1910.305 Electrical - Wiring Methods, Components, and Equipment OSHA citation code: 19100305 G01 III | Other | 1 | 1 | $0 | $0 | Dec 30, 2005 | - | - |
| 02003 | 1910.334 Electrical - Use of Equipment OSHA citation code: 19100334 A02 I | Other | 1 | 1 | $0 | $0 | Nov 10, 2005 | - | - |
Failure to Abate Penalties1 citation
OSHA's enforcement record shows Failure to Abate (FTA) activity recorded against 1 citation issued in this inspection. An FTA penalty is assessed during a follow-up inspection when OSHA's records indicate a previously cited hazard was not corrected by the abatement date. Each row below shows the FTA fields published on the original citation record: the follow-up inspection number, the FTA issuance date, the FTA penalty amount, and any FTA contest or final order date on record.
| Citation | FTA Inspection | FTA Issuance | FTA Penalty | FTA Contest | FTA Final Order |
|---|---|---|---|---|---|
| 01001A | #309639177 | Jan 27, 2006 | - | Feb 14, 2006 | May 25, 2006 |
Dec 10, 1987#100644285Dec 10, 1987Planned (H) · Complete scope, Safety#100644285$02 viol.2 violations$0 in penalties
Inspection #100644285
Dates
- Opened
- Dec 10, 1987
- Closing Conference Date
- Dec 11, 1987
- Closed
- Jan 4, 1988
Inspection
- Advance Notice
- No
- Owner Type
- Private
- Union Status
- No
- Number of Employees
- 21
Violations and Penalties
- Total Violations
- 2
- Violation Types
- 2 other-than-serious
- Initial Penalties
- $0
- Penalties on Record
- $0
- Site Address
- 200 Cornwall Ave, Buffalo, NY 14215
- Industry
- Not classified in OSHA's inspection record.
Planned Inspection: This inspection record is categorized as a planned inspection in the DOL OSHA enforcement data. Planned inspections are part of OSHA's scheduled enforcement activity rather than being opened directly from a complaint or reported incident at that worksite.
Violations
Violation list (2 of 2 shown)
| Citation | Standard | Type | Instances | Exposed | Initial | Current | Abatement | Contest | Final Order |
|---|---|---|---|---|---|---|---|---|---|
| 01001 | 1910.252 Welding, Cutting, and Brazing - General Requirements OSHA citation code: 19100252 E02 III | Other | 1 | 10 | $0 | $0 | Jan 19, 1988 | - | - |
| 01002 | 1910.1200 Hazard Communication OSHA citation code: 19101200 E01 | Other | 1 | 21 | $0 | $0 | Jan 19, 1988 | - | - |
Penalty amounts may differ from final amounts after settlement or judicial review. How to read these records
About these records
A company page groups inspections with the same normalized employer name, city and state; it is not a legal-entity identifier (how pages are grouped).
This page displays public OSHA enforcement data. Status text follows the DOL inspection record first and may include citation-level context when the inspection feed and citation records are out of sync. Penalty amounts shown reflect the latest penalty amounts on record in the DOL database and may differ from initial assessments or final amounts. This is not an official OSHA resource.
OSHA's public enforcement data does not publish a "guilty" or "not guilty" field for inspections. The closest outcome fields available are the citation counts, penalty amounts, contest dates, final-order dates, and the inspection close date shown on this page. How to interpret these status fields. How initial and current penalties are recorded.
OSHA may publish multiple citation rows in the same inspection with the same standard and penalty fields. Separate rows can still differ in OSHA metadata such as citation identifier, recorded instance count, exposed workers, or gravity value. Contest and Final Order columns show citation-level dates from OSHA's enforcement record. A dash means OSHA's record does not currently show that activity for the citation.
Source: OSHA chemical exposure sampling data (OSHA Information System). P = Personal (worker breathing zone), A = Area (general air). Rows marked QC are analytical quality control measurements, not chemical exposures. OSHA PEL (Permissible Exposure Limit) values from the OSHA Occupational Chemical Database, matched via IMIS substance code (analyte code) (exact government key).
Source: U.S. Department of Labor OSHA enforcement data, violations table fields fta_insp_nr, fta_issuance_date, fta_penalty, fta_contest_date, fta_final_order_date. The FTA follow-up inspection is linked via fta_insp_nr to the inspection activity number (exact government key). When the follow-up inspection is not currently on record in SafetyRecord, the inspection number is shown without a link.
Understanding These Penalties
The maximum penalty for a serious violation in 2025 is $16,550 per violation. For willful violations, the range is $11,823 to $165,514. The current penalty column shows the latest amount on record in OSHA's database for each citation. When the current penalty differs from the initial penalty, OSHA's records show that the amount changed during the enforcement process, but this page does not determine the specific reason for each change. Penalty amounts are set by OSHA and adjusted annually for inflation.
4 inspections, 1987 to 2006. Each row is one inspection; point at or tap a row for its dates and totals.
Source: DOL OSHA enforcement data (inspections and violations), linked via activity_nr (exact government key).
Penalty changes: Amounts shown reflect what OSHA's enforcement record publishes. The reason for any change is not stated unless OSHA's record explicitly says so.
Short cases: When a case closed soon after it opened, the closed marker is drawn slightly to the right so both markers stay visible. Each row's card shows the exact dates.
Standards cited
Chemical exposure sampling
Industry comparison
BLS 2024 survey: metal window and door manufacturing reported 3.4 injuries and illnesses per 100 full-time workers (total recordable cases, national, private industry; relative standard error 9.3%). This is an industry-wide average from a federal survey, not a measurement of this establishment. Source