JOHN HARRISON COMPANY
957 ROUTE 8, GLENSHAW, PA 15116 · NAICS 332322 Sheet Metal Work Manufacturing
Having inspection records is common for businesses in regulated industries. Data and methodology
Inspection records
Feb 7, 2005#308011956Feb 7, 2005Planned (H) · No Inspection scope, Safety#308011956$00 viol.0 violations$0 in penalties
Inspection #308011956
Dates
- Opened
- Feb 7, 2005
- Closing Conference Date
- Feb 7, 2005
- Closed
- Feb 7, 2005
Inspection
- Advance Notice
- No
- Owner Type
- Private
- Union Status
- Not recorded
- Number of Employees
- Not recorded
Violations and Penalties
- Total Violations
- 0
- Initial Penalties
- $0
- Penalties on Record
- $0
- Site Address
- 975 Route 8, Glenshaw, PA 15116
- Industry
- 332322 Sheet Metal Work Manufacturing
Planned Inspection: This inspection record is categorized as a planned inspection in the DOL OSHA enforcement data. Planned inspections are part of OSHA's scheduled enforcement activity rather than being opened directly from a complaint or reported incident at that worksite.
Jul 8, 1987#818153Jul 8, 1987Follow-Up (F) · Partial scope, Safety#818153$00 viol.0 violations$0 in penalties
Inspection #818153
Dates
- Opened
- Jul 8, 1987
- Closing Conference Date
- Jul 8, 1987
- Closed
- Jul 14, 1987
Inspection
- Advance Notice
- No
- Owner Type
- Private
- Union Status
- Yes
- Number of Employees
- 82
Violations and Penalties
- Total Violations
- 0
- Initial Penalties
- $0
- Penalties on Record
- $0
- Site Address
- 957 Route 8, Glenshaw, PA 15116
- Industry
- 332322 Sheet Metal Work Manufacturing
Follow-Up Inspection: This inspection record is categorized as a follow-up inspection in the DOL OSHA enforcement data. Follow-up inspections are used by OSHA after earlier enforcement activity and can be used to check later compliance status.
Jun 2, 1987#100421296Jun 2, 1987Follow-Up (F) · Partial scope, Safety#100421296$2,7904 viol.4 violations$2,790 in penalties
Inspection #100421296
Dates
- Opened
- Jun 2, 1987
- Closing Conference Date
- Jun 2, 1987
- Closed
- Jun 25, 1987
Inspection
- Advance Notice
- No
- Owner Type
- Private
- Union Status
- Yes
- Number of Employees
- 82
Violations and Penalties
- Total Violations
- 4
- Violation Types
- 3 serious, 1 repeat
- Initial Penalties
- $2,790
- Penalties on Record
- $2,790
- Site Address
- 957 Route 8, Glenshaw, PA 15116
- Industry
- 332322 Sheet Metal Work Manufacturing
Follow-Up Inspection: This inspection record is categorized as a follow-up inspection in the DOL OSHA enforcement data. Follow-up inspections are used by OSHA after earlier enforcement activity and can be used to check later compliance status.
Violations
Violation list (4 of 4 shown)
| Citation | Standard | Type | Instances | Exposed | Initial | Current | Abatement | Contest | Final Order |
|---|---|---|---|---|---|---|---|---|---|
| 01001 | 1910.212 General Requirements for All Machines (Machine Guarding) OSHA citation code: 19100212 A01 | Serious | 4 | 10 | $450 | $450 | Jun 19, 1987 | - | - |
| 01002 | 1910.243 Guarding of Portable Powered Tools OSHA citation code: 19100243 C01 | Serious | 1 | 3 | $540 | $540 | Jun 16, 1987 | - | - |
| 01003 | 1910.304 Electrical - Wiring Design and Protection OSHA citation code: 19100304 F05 V | Serious | 1 | 1 | $540 | $540 | Jun 16, 1987 | - | - |
| 02001 | 1910.212 General Requirements for All Machines (Machine Guarding) OSHA citation code: 19100212 A03 II | Repeat | 1 | 2 | $1,260 | $1,260 | Jun 19, 1987 | - | - |
Feb 17, 1987#822726Feb 17, 1987Planned (H) · Complete scope, Safety#822726$2,02017 viol.17 violations$2,020 in penalties
Inspection #822726
Dates
- Opened
- Feb 17, 1987
- Closing Conference Date
- Feb 17, 1987
- Closed
- Jun 25, 1987
Inspection
- Advance Notice
- No
- Owner Type
- Private
- Union Status
- Yes
- Number of Employees
- 85
Violations and Penalties
- Total Violations
- 17
- Violation Types
- 15 serious, 2 other-than-serious
- Initial Penalties
- $3,700
- Penalties on Record
- $2,020
- Site Address
- 957 Route 8, Glenshaw, PA 15116
- Industry
- 332322 Sheet Metal Work Manufacturing
Planned Inspection: This inspection record is categorized as a planned inspection in the DOL OSHA enforcement data. Planned inspections are part of OSHA's scheduled enforcement activity rather than being opened directly from a complaint or reported incident at that worksite.
Violations
Violation list (10 of 17 shown)
| Citation | Standard | Type | Instances | Exposed | Initial | Current | Abatement | Contest | Final Order |
|---|---|---|---|---|---|---|---|---|---|
| 01001 | 1910.184 Slings OSHA citation code: 19100184 E03 I | Serious | 7 | 8 | $280 | $180 | Mar 27, 1987 | - | - |
| 01002 | 1910.106 Flammable Liquids OSHA citation code: 19100106 E02 IVA | Serious | 1 | 1 | $280 | $280 | Mar 24, 1987 | - | - |
| 01003 | 1910.107 Spray Finishing Using Flammable and Combustible Materials OSHA citation code: 19100107 E02 | Serious | 1 | 3 | $210 | $0 | Mar 24, 1987 | - | - |
| 01004 | 1910.107 Spray Finishing Using Flammable and Combustible Materials OSHA citation code: 19100107 E09 | Serious | 1 | 1 | $210 | $0 | Mar 24, 1987 | - | - |
| 01005 | 1910.107 Spray Finishing Using Flammable and Combustible Materials OSHA citation code: 19100107 G07 | Serious | 1 | 3 | $210 | $0 | Mar 24, 1987 | - | - |
| 01006 | 1910.215 Abrasive Wheel Machinery OSHA citation code: 19100215 A02 | Serious | 1 | 20 | $350 | $350 | Mar 27, 1987 | - | - |
| 01007 | 1910.212 General Requirements for All Machines (Machine Guarding) OSHA citation code: 19100212 A01 | Serious | 1 | 2 | $420 | $220 | Apr 3, 1987 | - | - |
| 01008 | 1910.212 General Requirements for All Machines (Machine Guarding) OSHA citation code: 19100212 A03 II | Serious | 1 | 33 | $420 | $420 | Apr 3, 1987 | - | - |
| 01009 | 1910.252 Welding, Cutting, and Brazing - General Requirements OSHA citation code: 19100252 B04 II | Serious | 1 | 2 | $270 | $270 | Mar 24, 1987 | - | - |
| 01010 | 1910.252 Welding, Cutting, and Brazing - General Requirements OSHA citation code: 19100252 B04 IXC | Serious | 1 | 3 | $280 | $0 | Mar 27, 1987 | - | - |
Showing the 10 violations listed first by citation identifier. This inspection has 17 total violations documented in the U.S. Department of Labor OSHA enforcement database. The complete violation list is available at enforcedata.dol.gov.
Failure to Abate Penalties1 citation, $2,700 in FTA penalties on record
OSHA's enforcement record shows Failure to Abate (FTA) activity recorded against 1 citation issued in this inspection. An FTA penalty is assessed during a follow-up inspection when OSHA's records indicate a previously cited hazard was not corrected by the abatement date. Each row below shows the FTA fields published on the original citation record: the follow-up inspection number, the FTA issuance date, the FTA penalty amount, and any FTA contest or final order date on record.
| Citation | FTA Inspection | FTA Issuance | FTA Penalty | FTA Contest | FTA Final Order |
|---|
Showing the 0 FTA rows present in the first 10 citations on this inspection. OSHA's record shows 1 total citations with FTA activity for this inspection. The complete list is available at enforcedata.dol.gov.
Jun 27, 1985#1119932Jun 27, 1985Planned (H) · Complete scope, Safety#1119932$3003 viol.3 violations$300 in penalties
Inspection #1119932
Dates
- Opened
- Jun 27, 1985
- Closing Conference Date
- Jun 27, 1985
- Closed
- Dec 23, 1985
Inspection
- Advance Notice
- No
- Owner Type
- Private
- Union Status
- Yes
- Number of Employees
- 60
Violations and Penalties
- Total Violations
- 3
- Violation Types
- 2 serious, 1 other-than-serious
- Initial Penalties
- $300
- Penalties on Record
- $300
- Site Address
- 957 Route 8, Glenshaw, PA 15116
- Industry
- 332322 Sheet Metal Work Manufacturing
Planned Inspection: This inspection record is categorized as a planned inspection in the DOL OSHA enforcement data. Planned inspections are part of OSHA's scheduled enforcement activity rather than being opened directly from a complaint or reported incident at that worksite.
Violations
Violation list (3 of 3 shown)
| Citation | Standard | Type | Instances | Exposed | Initial | Current | Abatement | Contest | Final Order |
|---|---|---|---|---|---|---|---|---|---|
| 01001 | 1910.212 General Requirements for All Machines (Machine Guarding) OSHA citation code: 19100212 A03 II | Serious | 3 | 2 | $180 | $180 | Aug 5, 1985 | - | - |
| 01002 | 1910.252 Welding, Cutting, and Brazing - General Requirements OSHA citation code: 19100252 A02 IVC | Serious | 1 | 1 | $120 | $120 | Jul 26, 1985 | - | - |
| 02001 | 1910.215 Abrasive Wheel Machinery OSHA citation code: 19100215 A04 | Other | 1 | 1 | $0 | $0 | Jul 10, 1985 | - | - |
Penalty amounts may differ from final amounts after settlement or judicial review. How to read these records
About these records
A company page groups inspections with the same normalized employer name, city and state; it is not a legal-entity identifier (how pages are grouped).
This page displays public OSHA enforcement data. Status text follows the DOL inspection record first and may include citation-level context when the inspection feed and citation records are out of sync. Penalty amounts shown reflect the latest penalty amounts on record in the DOL database and may differ from initial assessments or final amounts. This is not an official OSHA resource.
OSHA's public enforcement data does not publish a "guilty" or "not guilty" field for inspections. The closest outcome fields available are the citation counts, penalty amounts, contest dates, final-order dates, and the inspection close date shown on this page. How to interpret these status fields. How initial and current penalties are recorded.
OSHA may publish multiple citation rows in the same inspection with the same standard and penalty fields. Separate rows can still differ in OSHA metadata such as citation identifier, recorded instance count, exposed workers, or gravity value. Contest and Final Order columns show citation-level dates from OSHA's enforcement record. A dash means OSHA's record does not currently show that activity for the citation.
Source: U.S. Department of Labor OSHA enforcement data, violations table fields fta_insp_nr, fta_issuance_date, fta_penalty, fta_contest_date, fta_final_order_date. The FTA follow-up inspection is linked via fta_insp_nr to the inspection activity number (exact government key). When the follow-up inspection is not currently on record in SafetyRecord, the inspection number is shown without a link.
Understanding These Penalties
The maximum penalty for a serious violation in 2025 is $16,550 per violation. For willful violations, the range is $11,823 to $165,514. The current penalty column shows the latest amount on record in OSHA's database for each citation. When the current penalty differs from the initial penalty, OSHA's records show that the amount changed during the enforcement process, but this page does not determine the specific reason for each change. Penalty amounts are set by OSHA and adjusted annually for inflation.
5 inspections, 1985 to 2005. Each row is one inspection; point at or tap a row for its dates and totals.
Source: DOL OSHA enforcement data (inspections and violations), linked via activity_nr (exact government key).
Penalty changes: Amounts shown reflect what OSHA's enforcement record publishes. The reason for any change is not stated unless OSHA's record explicitly says so.
Short cases: When a case closed soon after it opened, the closed marker is drawn slightly to the right so both markers stay visible. Each row's card shows the exact dates.
Standards cited
Industry comparison
Fabricated Metal Product Manufacturing, 48,574 employers with OSHA inspections. Arithmetic from DOL records.
BLS 2024 survey: sheet metal work manufacturing reported 3.3 injuries and illnesses per 100 full-time workers (total recordable cases, national, private industry; relative standard error 9.4%). This is an industry-wide average from a federal survey, not a measurement of this establishment. Source