GREGORY MFG. CO.
2512 HENRY LADYN DR, FORT MADISON, IA 52627
Having inspection records is common for businesses in regulated industries. Data and methodology
Inspection records
Jan 29, 2013#316926195Jan 29, 2013Planned (H) · Partial scope, Safety#316926195$3,1504 viol.4 violations$3,150 in penalties
Inspection #316926195
Dates
- Opened
- Jan 29, 2013
- Closing Conference Date
- Jan 29, 2013
- Closed
- May 6, 2013
Inspection
- Advance Notice
- No
- Owner Type
- Private
- Union Status
- No
- Number of Employees
- 130
Violations and Penalties
- Total Violations
- 4
- Violation Types
- 4 serious
- Initial Penalties
- $6,300
- Penalties on Record
- $3,150
- Site Address
- 2512 Henry Ladyn Dr, Fort Madison, IA 52627
- Industry
- 332313 Plate Work Manufacturing
Planned Inspection: This inspection record is categorized as a planned inspection in the DOL OSHA enforcement data. Planned inspections are part of OSHA's scheduled enforcement activity rather than being opened directly from a complaint or reported incident at that worksite.
Violations
Violation list (4 of 4 shown)
| Citation | Standard | Type | Instances | Exposed | Initial | Current | Abatement | Contest | Final Order |
|---|---|---|---|---|---|---|---|---|---|
| 01001 | 1910.147 Control of Hazardous Energy (Lockout/Tagout) OSHA citation code: 19100147 C04 II | Serious | 1 | 3 | $1,750 | $875 | Apr 24, 2013 | - | - |
| 01002 | 1910.147 Control of Hazardous Energy (Lockout/Tagout) OSHA citation code: 19100147 C06 IB | Serious | 1 | 3 | $1,050 | $525 | Apr 24, 2013 | - | - |
| 01003 | 1910.147 Control of Hazardous Energy (Lockout/Tagout) OSHA citation code: 19100147 C07 I | Serious | 1 | 3 | $1,750 | $875 | Apr 24, 2013 | - | - |
| 01004 | 1910.212 General Requirements for All Machines (Machine Guarding) OSHA citation code: 19100212 A01 | Serious | 1 | 3 | $1,750 | $875 | Apr 24, 2013 | - | - |
Apr 3, 1991#104256912Apr 3, 1991Follow-Up (F) · Complete scope, Safety#104256912$00 viol.0 violations$0 in penalties
Inspection #104256912
Dates
- Opened
- Apr 3, 1991
- Closing Conference Date
- Apr 3, 1991
- Closed
- Apr 3, 1991
Inspection
- Advance Notice
- No
- Owner Type
- Private
- Union Status
- No
- Number of Employees
- 55
Violations and Penalties
- Total Violations
- 0
- Initial Penalties
- $0
- Penalties on Record
- $0
- Site Address
- 2512 Henry Ladyn Dr, Fort Madison, IA 52627
- Industry
- Not classified in OSHA's inspection record.
Follow-Up Inspection: This inspection record is categorized as a follow-up inspection in the DOL OSHA enforcement data. Follow-up inspections are used by OSHA after earlier enforcement activity and can be used to check later compliance status.
Mar 5, 1990#104239876Mar 5, 1990Complaint (B) · Complete scope, Safety#104239876$64013 viol.13 violations$640 in penalties
Inspection #104239876
Dates
- Opened
- Mar 5, 1990
- Closing Conference Date
- Mar 5, 1990
- Contested
- May 1, 1991
- Final Order
- Dec 31, 1991
- Closed
- Dec 31, 1990
Inspection
- Advance Notice
- No
- Owner Type
- Private
- Union Status
- No
- Number of Employees
- 40
- Related Activity
- 1 complaint
Violations and Penalties
- Total Violations
- 13
- Violation Types
- 10 serious, 3 other-than-serious
- Initial Penalties
- $640
- Penalties on Record
- $640
- Site Address
- 2512 Henry Ladyn Dr, Fort Madison, IA 52627
- Industry
- Not classified in OSHA's inspection record.
Complaint Inspection: This inspection record is categorized as a complaint inspection in the DOL OSHA enforcement data. OSHA can open complaint-driven inspections after receiving safety or health complaints from workers or their representatives.
Violations
Violation list (12 of 13 shown)
| Citation | Standard | Type | Instances | Exposed | Initial | Current | Abatement | Contest | Final Order |
|---|---|---|---|---|---|---|---|---|---|
| 01001 | 1910.107 Spray Finishing Using Flammable and Combustible Materials OSHA citation code: 19100107 I08 | Serious | 1 | 3 | $40 | $40 | Apr 18, 1990 | - | Dec 31, 1990 |
| 01002 | 1910.178 Powered Industrial Trucks OSHA citation code: 19100178 L | Serious | 3 | 6 | $40 | $40 | May 2, 1990 | - | Dec 31, 1990 |
| 01003 | 1910.212 General Requirements for All Machines (Machine Guarding) OSHA citation code: 19100212 A03 II | Serious | 4 | 4 | $120 | $120 | May 2, 1990 | - | Dec 31, 1990 |
| 01004A | 1910.217 Mechanical Power Presses OSHA citation code: 19100217 B03 I | Serious | 4 | 9 | $120 | $120 | May 2, 1990 | - | Dec 31, 1990 |
| 01004B | 1910.217 Mechanical Power Presses OSHA citation code: 19100217 B04 I | Serious | 2 | 3 | $0 | $0 | May 2, 1990 | - | Dec 31, 1990 |
| 01004C | 1910.217 Mechanical Power Presses OSHA citation code: 19100217 C02 I | Serious | 1 | 3 | $0 | $0 | May 2, 1990 | May 1, 1991 | Dec 31, 1991 |
| 01005A | 1910.219 Mechanical Power-Transmission Apparatus OSHA citation code: 19100219 D01 | Serious | 14 | 12 | $80 | $80 | May 2, 1990 | - | Dec 31, 1990 |
| 01005B | 1910.219 Mechanical Power-Transmission Apparatus OSHA citation code: 19100219 E03 I | Serious | 2 | 3 | $0 | $0 | May 2, 1990 | - | Dec 31, 1990 |
| 01006 | 1910.252 Welding, Cutting, and Brazing - General Requirements OSHA citation code: 19100252 A02 IV | Serious | 1 | 3 | $80 | $80 | May 2, 1990 | - | Dec 31, 1990 |
| 01007 | 1910.252 Welding, Cutting, and Brazing - General Requirements OSHA citation code: 19100252 E02 III | Serious | 6 | 6 | $120 | $120 | May 2, 1990 | - | Dec 31, 1990 |
| 02001 | 40002 OSHA citation code: 40002 1 A | Other | 1 | 40 | $40 | $40 | Apr 4, 1990 | May 1, 1991 | Dec 31, 1991 |
| 02002 | 120.3 OSHA citation code: 1200003 1 | Other | 1 | 40 | $0 | $0 | May 2, 1990 | May 1, 1991 | Dec 31, 1991 |
Showing the 12 violations listed first by citation identifier. This inspection has 13 total violations documented in the U.S. Department of Labor OSHA enforcement database. The complete violation list is available at enforcedata.dol.gov.
Failure to Abate Penalties3 citations, $1,000 in FTA penalties on record
OSHA's enforcement record shows Failure to Abate (FTA) activity recorded against 3 citations issued in this inspection. An FTA penalty is assessed during a follow-up inspection when OSHA's records indicate a previously cited hazard was not corrected by the abatement date. Each row below shows the FTA fields published on the original citation record: the follow-up inspection number, the FTA issuance date, the FTA penalty amount, and any FTA contest or final order date on record.
| Citation | FTA Inspection | FTA Issuance | FTA Penalty | FTA Contest | FTA Final Order |
|---|---|---|---|---|---|
| 01004C | #104256912 | Apr 16, 1991 | $600 | - | - |
| 02001 | #104256912 | Apr 16, 1991 | $200 | May 1, 1991 | - |
| 02002 | #104256912 | Apr 16, 1991 | $200 | May 1, 1991 | - |
May 5, 1988#104212113May 5, 1988Planned (H) · Records Only scope, Safety#104212113$00 viol.0 violations$0 in penalties
Inspection #104212113
Dates
- Opened
- May 5, 1988
- Closing Conference Date
- May 5, 1988
- Closed
- May 5, 1988
Inspection
- Advance Notice
- No
- Owner Type
- Private
- Union Status
- No
- Number of Employees
- 15
Violations and Penalties
- Total Violations
- 0
- Initial Penalties
- $0
- Penalties on Record
- $0
- Site Address
- Highway 61 South, Fort Madison, IA 52627
- Industry
- Not classified in OSHA's inspection record.
Planned Inspection: This inspection record is categorized as a planned inspection in the DOL OSHA enforcement data. Planned inspections are part of OSHA's scheduled enforcement activity rather than being opened directly from a complaint or reported incident at that worksite.
Penalty amounts may differ from final amounts after settlement or judicial review. How to read these records
About these records
A company page groups inspections with the same normalized employer name, city and state; it is not a legal-entity identifier (how pages are grouped).
This page displays public OSHA enforcement data. Status text follows the DOL inspection record first and may include citation-level context when the inspection feed and citation records are out of sync. Penalty amounts shown reflect the latest penalty amounts on record in the DOL database and may differ from initial assessments or final amounts. This is not an official OSHA resource.
OSHA's public enforcement data does not publish a "guilty" or "not guilty" field for inspections. The closest outcome fields available are the citation counts, penalty amounts, contest dates, final-order dates, and the inspection close date shown on this page. How to interpret these status fields. How initial and current penalties are recorded.
OSHA may publish multiple citation rows in the same inspection with the same standard and penalty fields. Separate rows can still differ in OSHA metadata such as citation identifier, recorded instance count, exposed workers, or gravity value. Contest and Final Order columns show citation-level dates from OSHA's enforcement record. A dash means OSHA's record does not currently show that activity for the citation.
Source: U.S. Department of Labor OSHA enforcement data, violations table fields fta_insp_nr, fta_issuance_date, fta_penalty, fta_contest_date, fta_final_order_date. The FTA follow-up inspection is linked via fta_insp_nr to the inspection activity number (exact government key). When the follow-up inspection is not currently on record in SafetyRecord, the inspection number is shown without a link.
Understanding These Penalties
The maximum penalty for a serious violation in 2025 is $16,550 per violation. For willful violations, the range is $11,823 to $165,514. The current penalty column shows the latest amount on record in OSHA's database for each citation. When the current penalty differs from the initial penalty, OSHA's records show that the amount changed during the enforcement process, but this page does not determine the specific reason for each change. Penalty amounts are set by OSHA and adjusted annually for inflation.
4 inspections, 1988 to 2013. Each row is one inspection; point at or tap a row for its dates and totals.
Source: DOL OSHA enforcement data (inspections and violations), linked via activity_nr (exact government key).
Penalty changes: Amounts shown reflect what OSHA's enforcement record publishes. The reason for any change is not stated unless OSHA's record explicitly says so.
Short cases: When a case closed soon after it opened, the closed marker is drawn slightly to the right so both markers stay visible. Each row's card shows the exact dates.
Standards cited
Industry comparison
BLS 2024 survey: plate work manufacturing reported 3.8 injuries and illnesses per 100 full-time workers (total recordable cases, national, private industry; relative standard error 17.8%). This is an industry-wide average from a federal survey, not a measurement of this establishment. Source