Question 1

How many OSHA inspections has VSC FIRE & SECURITY, INC had?

Accepted Answer

VSC FIRE & SECURITY, INC has been inspected 1 times by OSHA between Oct 22, 2025 and Oct 22, 2025, with 0 violations and $0 in penalties on record.

Question 2

What is OSHA's Focus Four for construction?

Accepted Answer

OSHA's Focus Four identifies the four leading causes of fatalities in the construction industry: falls, struck-by incidents, electrocution, and caught-in/between hazards. Together these account for the majority of construction worker deaths each year. OSHA's construction standards under 29 CFR 1926 specifically address each of these hazard categories, and they are a primary focus of programmed construction inspections.

Question 3

How does Virginia's state OSHA plan work?

Accepted Answer

Virginia operates its own OSHA-approved state plan through the Virginia Occupational Safety and Health program (VOSH), covering both private and public sector workers. VOSH conducts inspections and enforces standards at least as effective as federal OSHA.

Question 4

Why do some OSHA inspections result in zero penalties?

Accepted Answer

Not every OSHA inspection results in penalties. Inspections may find no violations, or the violations cited may be classified as Other-than-Serious with penalties reduced or waived. OSHA considers several factors when determining penalties, including employer size (small employers receive reductions), good faith efforts (having an effective safety program), and history (first-time offenders may receive lower penalties).

Question 5

Can employees refuse to work if conditions are unsafe?

Accepted Answer

Under limited circumstances, employees may refuse to perform work if they reasonably believe they face an imminent danger of death or serious injury. Before refusing, the employee should ask the employer to correct the hazard and, if possible, contact OSHA. The conditions for a protected work refusal are narrow: the danger must be imminent, the employee must have asked the employer to fix it, and there must not have been time to get the hazard corrected through normal channels.

Question 6

What happens during the opening conference of an OSHA inspection?

Accepted Answer

At the start of an inspection, the OSHA compliance officer holds an opening conference with the employer. During this conference, the inspector presents credentials, explains the reason for the inspection (complaint, programmed, referral, etc.), describes the scope of the inspection, and outlines employer and employee rights. The employer may designate a representative to accompany the inspector during the walkaround. Employee representatives also have the right to participate.

Question 7

How does OSHA select employers for programmed inspections?

Accepted Answer

OSHA uses objective data to select employers for programmed inspections. Selection criteria include industry injury and illness rates from the Bureau of Labor Statistics, participation in National or Local Emphasis Programs targeting specific hazards, and employer-specific data such as reported injury rates from OSHA Form 300A submissions. The selection process is designed to focus limited inspection resources on workplaces with the highest potential for serious injuries and illnesses.

VSC FIRE & SECURITY, INC