Question 1

How many OSHA inspections has XIANG WANG CONSTRUCTION CORP. had?

Accepted Answer

XIANG WANG CONSTRUCTION CORP. has been inspected 6 times by OSHA between Jul 23, 2012 and May 21, 2014, with 7 violations and $9,600 in penalties on record.

Question 2

Why does construction have more OSHA inspections than other industries?

Accepted Answer

Construction consistently has the highest number of OSHA inspections for several reasons: the industry has one of the highest fatality rates of any sector, worksites change frequently (creating new hazards), many construction operations are visible from public areas (making observation easier), and OSHA runs multiple National Emphasis Programs targeting construction hazards. The transient nature of construction work also means new employers continuously enter the inspection pool.

Question 3

What is a Serious violation under OSHA?

Accepted Answer

A Serious violation is cited when there is a substantial probability that death or serious physical harm could result from a hazard, and the employer knew or should have known about the condition. Serious violations carry mandatory penalties. For 2025, the maximum penalty for a serious violation is $16,550 per violation. The actual amount may be adjusted based on factors including employer size, good faith efforts, and violation history.

Question 4

How does OSHA calculate penalty amounts?

Accepted Answer

OSHA sets initial penalty amounts based on the gravity of the violation (severity and probability of injury). Penalties are then adjusted based on three factors: employer size (smaller employers may receive reductions), good faith (employers with effective safety programs), and violation history (employers with no recent prior violations). Penalties may be further reduced through informal settlement conferences between the employer and the OSHA Area Director.

Question 5

What triggers an OSHA follow-up inspection?

Accepted Answer

OSHA conducts follow-up inspections to verify that previously cited hazards have been corrected by the abatement deadline. Follow-ups may also verify that new safety programs or procedures required by earlier citations are being properly implemented. If the employer has not corrected the cited conditions, OSHA can issue a Failure to Abate notice with additional daily penalties.

Question 6

How does OSHA handle multi-employer worksites?

Accepted Answer

On multi-employer worksites (common in construction), OSHA applies a multi-employer citation policy. Four categories of employers may be cited: the creating employer (whose actions created the hazard), the exposing employer (whose employees are exposed), the correcting employer (responsible for correcting the hazard), and the controlling employer (with general supervisory authority). More than one employer can be cited for the same hazard.

Standard	Citations	Penalties
1926.404Electrical - Wiring Design and Protection (Construction)	2	$4,000
1910.1200Hazard Communication	1	$0
1926.25Housekeeping	1	$1,200
1926.50Medical Services and First Aid (Construction)	1	$1,200
1926.300General Requirements - Tools, Hand and Power	1	$1,200
1926.405Electrical - Wiring Methods (Construction)	1	$2,000

ID	Opened	Type	Scope	Viol.	Penalties
#339780454	May 21, 2014	Follow-Up	Partial	0	$0
#339780462	May 21, 2014	Follow-Up	Partial	0	$0
#339783896	May 21, 2014	Follow-Up	Complete	0	$0
#339479115

XIANG WANG CONSTRUCTION CORP.