Skip to content
SafetyRecord logoSafetyRecord
LANGE'S WELDING AND MFG. INC.
$880
penalties
21
viol.
2
insp.

LANGE'S WELDING AND MFG. INC.

3016 S. SYLVANIA AVE., STURTEVANT, WI 53177

Inspections
2
Apr 1988 to Aug 1988 · 2 safety, 0 health
Violations
21
across 2 inspections
Penalties on record
$880
latest amounts in DOL records
By classification
Serious 10Willful 0Repeat 0Other 11

Having inspection records is common for businesses in regulated industries. Data and methodology

Inspection records

Aug 16, 1988Follow-Up (F) · Partial scope, Safety#103549069$00 viol.

Inspection #103549069

Dates

Opened
Aug 16, 1988
Closing Conference Date
Aug 16, 1988
Closed
Mar 10, 1989

Inspection

Advance Notice
No
Owner Type
Private
Union Status
No
Number of Employees
28

Violations and Penalties

Total Violations
0
Initial Penalties
$0
Penalties on Record
$0
Site Address
3016 S. Sylvania Ave., Sturtevant, WI 53177
Industry
Not classified in OSHA's inspection record.

Follow-Up Inspection: This inspection record is categorized as a follow-up inspection in the DOL OSHA enforcement data. Follow-up inspections are used by OSHA after earlier enforcement activity and can be used to check later compliance status.

Apr 28, 1988Planned (H) · Complete scope, Safety#103467601$88021 viol.

Inspection #103467601

Dates

Opened
Apr 28, 1988
Closing Conference Date
May 9, 1988
Closed
Mar 10, 1989

Inspection

Advance Notice
No
Owner Type
Private
Union Status
No
Number of Employees
28

Violations and Penalties

Total Violations
21
Violation Types
10 serious, 11 other-than-serious
Initial Penalties
$880
Penalties on Record
$880
Site Address
3016 S. Sylvania Ave., Sturtevant, WI 53177
Industry
Not classified in OSHA's inspection record.

Planned Inspection: This inspection record is categorized as a planned inspection in the DOL OSHA enforcement data. Planned inspections are part of OSHA's scheduled enforcement activity rather than being opened directly from a complaint or reported incident at that worksite.

Violations

Violation list (21 of 21 shown)
CitationStandardTypeInstancesExposedInitialCurrentAbatementContestFinal Order
010011910.25
Stairways
OSHA citation code: 19100025 D01 X
Serious16$120$120Jun 17, 1988--
010021910.107
Spray Finishing Using Flammable and Combustible Materials
OSHA citation code: 19100107 C05
Serious12$80$80May 19, 1988--
010031910.212
General Requirements for All Machines (Machine Guarding)
OSHA citation code: 19100212 A03 II
Serious12$200$200Jun 17, 1988--
010041910.212
General Requirements for All Machines (Machine Guarding)
OSHA citation code: 19100212 A05
Serious11$80$80Jun 17, 1988--
010051910.219
Mechanical Power-Transmission Apparatus
OSHA citation code: 19100219 D01
Serious33$120$120Jun 17, 1988--
010061910.243
Guarding of Portable Powered Tools
OSHA citation code: 19100243 C01
Serious11$80$80Jul 18, 1988--
01007A1910.252
Welding, Cutting, and Brazing - General Requirements
OSHA citation code: 19100252 A02 IVC
Serious16$120$120May 19, 1988--
01007B1910.252
Welding, Cutting, and Brazing - General Requirements
OSHA citation code: 19100252 E02 III
Serious16$0$0Jul 2, 1988--
01008A1910.304
Electrical - Wiring Design and Protection
OSHA citation code: 19100304 A02
Serious128$80$80Jun 17, 1988--
01008B1910.304
Electrical - Wiring Design and Protection
OSHA citation code: 19100304 F05 V
Serious16$0$0Jun 17, 1988--
020011903.2
Posting of Notices; Availability of the Act, Regulations and Applicable Standards
OSHA citation code: 19030002 A01
Other128$0$0May 19, 1988--
020021904.2
Partial Exemption for Establishments in Certain Industries
OSHA citation code: 19040002 A
Other128$0$0May 19, 1988--
020031910.22
Walking-Working Surfaces - General Requirements
OSHA citation code: 19100022 A01
Other11$0$0May 19, 1988--
020041910.22
Walking-Working Surfaces - General Requirements
OSHA citation code: 19100022 D01
Other11$0$0Jul 2, 1988--
020051910.23
Ladders
OSHA citation code: 19100023 C01
Other11$0$0Jul 2, 1988--
020061910.24
Step Bolts and Manhole Steps
OSHA citation code: 19100024 H
Other11$0$0Jun 17, 1988--
020071910.37
Maintenance, Safeguards, and Operational Features for Exit Routes
OSHA citation code: 19100037 Q01
Other128$0$0Jun 17, 1988--
020081910.157
Portable Fire Extinguishers
OSHA citation code: 19100157 C04
Other16$0$0May 19, 1988--
020101910.178
Powered Industrial Trucks
OSHA citation code: 19100178 E01
Other11$0$0Jul 2, 1988--
020111910.1200
Hazard Communication
OSHA citation code: 19101200 E01
Other128$0$0Jul 18, 1988--
020121910.1200
Hazard Communication
OSHA citation code: 19101200 H
Other128$0$0Jul 18, 1988--

Failure to Abate Penalties21 citations, $950 in FTA penalties on record

OSHA's enforcement record shows Failure to Abate (FTA) activity recorded against 21 citations issued in this inspection. An FTA penalty is assessed during a follow-up inspection when OSHA's records indicate a previously cited hazard was not corrected by the abatement date. Each row below shows the FTA fields published on the original citation record: the follow-up inspection number, the FTA issuance date, the FTA penalty amount, and any FTA contest or final order date on record.

CitationFTA InspectionFTA IssuanceFTA PenaltyFTA ContestFTA Final Order
01001#103549069Aug 31, 1988---
01002#103549069Aug 31, 1988---
01003#103549069Aug 31, 1988---
01004#103549069Aug 31, 1988---
01005#103549069Aug 31, 1988---
01006#103549069Aug 31, 1988---
01007A#103549069Aug 31, 1988---
01007B#103549069Aug 31, 1988---
01008A#103549069Aug 31, 1988---
01008B#103549069Aug 31, 1988---
02001#103549069Aug 31, 1988---
02002#103549069Aug 31, 1988---
02003#103549069Aug 31, 1988---
02004#103549069Aug 31, 1988$100--
02005#103549069Aug 31, 1988---
02006#103549069Aug 31, 1988---
02007#103549069Aug 31, 1988$100--
02008#103549069Aug 31, 1988---
02010#103549069Aug 31, 1988---
02011#103549069Aug 31, 1988$350--
02012#103549069Aug 31, 1988$400--
Inspections 1 to 2 of 2, newest first

Penalty amounts may differ from final amounts after settlement or judicial review. How to read these records

About these records

A company page groups inspections with the same normalized employer name, city and state; it is not a legal-entity identifier (how pages are grouped).

This page displays public OSHA enforcement data. Status text follows the DOL inspection record first and may include citation-level context when the inspection feed and citation records are out of sync. Penalty amounts shown reflect the latest penalty amounts on record in the DOL database and may differ from initial assessments or final amounts. This is not an official OSHA resource.

OSHA's public enforcement data does not publish a "guilty" or "not guilty" field for inspections. The closest outcome fields available are the citation counts, penalty amounts, contest dates, final-order dates, and the inspection close date shown on this page. How to interpret these status fields. How initial and current penalties are recorded.

OSHA may publish multiple citation rows in the same inspection with the same standard and penalty fields. Separate rows can still differ in OSHA metadata such as citation identifier, recorded instance count, exposed workers, or gravity value. Contest and Final Order columns show citation-level dates from OSHA's enforcement record. A dash means OSHA's record does not currently show that activity for the citation.

Source: U.S. Department of Labor OSHA enforcement data, violations table fields fta_insp_nr, fta_issuance_date, fta_penalty, fta_contest_date, fta_final_order_date. The FTA follow-up inspection is linked via fta_insp_nr to the inspection activity number (exact government key). When the follow-up inspection is not currently on record in SafetyRecord, the inspection number is shown without a link.

Understanding These Penalties

The maximum penalty for a serious violation in 2025 is $16,550 per violation. For willful violations, the range is $11,823 to $165,514. The current penalty column shows the latest amount on record in OSHA's database for each citation. When the current penalty differs from the initial penalty, OSHA's records show that the amount changed during the enforcement process, but this page does not determine the specific reason for each change. Penalty amounts are set by OSHA and adjusted annually for inflation.

Standards cited

1910.22Walking-Working Surfaces - General Requirements2 citations · $0
1910.212General Requirements for All Machines (Machine Guarding)2 citations · $280
1910.252Welding, Cutting, and Brazing - General Requirements2 citations · $120

Other inspected employers in STURTEVANT, WI

All employers in STURTEVANT →