Skip to content
SafetyRecord logoSafetyRecord
LIVINGSTON CO COURTHOUSE
$0
penalties
18
viol.
5
insp.

LIVINGSTON CO COURTHOUSE

COURT ST, GENESEO, NY 14454

Inspections
5
Dec 1988 to Aug 2006 · 5 safety, 0 health
Violations
18
across 5 inspections
Penalties on record
$0
latest amounts in DOL records
By classification
Serious 8Willful 0Repeat 0Other 10

Having inspection records is common for businesses in regulated industries. Data and methodology

Inspection records

Aug 15, 2006Planned (H) · Complete scope, Safety#309957330$01 viol.

Inspection #309957330

Dates

Opened
Aug 15, 2006
Closing Conference Date
Aug 15, 2006
Closed
Aug 30, 2006

Inspection

Advance Notice
No
Owner Type
Local government
Union Status
Yes
Number of Employees
42

Violations and Penalties

Total Violations
1
Violation Types
1 serious
Initial Penalties
$0
Penalties on Record
$0
Site Address
2 Court St, Geneseo, NY 14454
Industry
922110

Planned Inspection: This inspection record is categorized as a planned inspection in the DOL OSHA enforcement data. Planned inspections are part of OSHA's scheduled enforcement activity rather than being opened directly from a complaint or reported incident at that worksite.

Violations

Violation list (1 of 1 shown)
CitationStandardTypeInstancesExposedInitialCurrentAbatementContestFinal Order
010011910.305
Wiring methods, components, and equipment for general use
OSHA citation code: 19100305 B01
Serious110$0$0Aug 24, 2006--
May 30, 1990Follow-Up (F) · Partial scope, Safety#104948179$00 viol.

Inspection #104948179

Dates

Opened
May 30, 1990
Closing Conference Date
May 30, 1990
Closed
May 30, 1990

Inspection

Advance Notice
No
Owner Type
Local government
Union Status
Yes
Number of Employees
69

Violations and Penalties

Total Violations
0
Initial Penalties
$0
Penalties on Record
$0
Site Address
Court St, Geneseo, NY 14454
Industry
Not classified in OSHA's inspection record.

Follow-Up Inspection: This inspection record is categorized as a follow-up inspection in the DOL OSHA enforcement data. Follow-up inspections are used by OSHA after earlier enforcement activity and can be used to check later compliance status.

Oct 12, 1989Follow-Up (F) · Partial scope, Safety#104787783$00 viol.

Inspection #104787783

Dates

Opened
Oct 12, 1989
Closing Conference Date
Oct 12, 1989
Closed
Oct 12, 1989

Inspection

Advance Notice
No
Owner Type
Local government
Union Status
No
Number of Employees
12

Violations and Penalties

Total Violations
0
Initial Penalties
$0
Penalties on Record
$0
Site Address
Court St, Geneseo, NY 14454
Industry
Not classified in OSHA's inspection record.

Follow-Up Inspection: This inspection record is categorized as a follow-up inspection in the DOL OSHA enforcement data. Follow-up inspections are used by OSHA after earlier enforcement activity and can be used to check later compliance status.

Jul 26, 1989Follow-Up (F) · Partial scope, Safety#104795174$00 viol.

Inspection #104795174

Dates

Opened
Jul 26, 1989
Closing Conference Date
Jul 26, 1989
Closed
Jul 26, 1989

Inspection

Advance Notice
No
Owner Type
Local government
Union Status
Yes
Number of Employees
69

Violations and Penalties

Total Violations
0
Initial Penalties
$0
Penalties on Record
$0
Site Address
Court St, Geneseo, NY 14454
Industry
Not classified in OSHA's inspection record.

Follow-Up Inspection: This inspection record is categorized as a follow-up inspection in the DOL OSHA enforcement data. Follow-up inspections are used by OSHA after earlier enforcement activity and can be used to check later compliance status.

Dec 5, 1988Planned (H) · Complete scope, Safety#104795745$017 viol.

Inspection #104795745

Dates

Opened
Dec 5, 1988
Closing Conference Date
Dec 5, 1988
Closed
May 30, 1990

Inspection

Advance Notice
No
Owner Type
Local government
Union Status
Yes
Number of Employees
69

Violations and Penalties

Total Violations
17
Violation Types
7 serious, 10 other-than-serious
Initial Penalties
$0
Penalties on Record
$0
Site Address
Court St, Geneseo, NY 14454
Industry
Not classified in OSHA's inspection record.

Planned Inspection: This inspection record is categorized as a planned inspection in the DOL OSHA enforcement data. Planned inspections are part of OSHA's scheduled enforcement activity rather than being opened directly from a complaint or reported incident at that worksite.

Violations

Violation list (10 of 17 shown)
CitationStandardTypeInstancesExposedInitialCurrentAbatementContestFinal Order
010011910.303
OSHA citation code: 19100303 B01 III
Serious369$0$0Feb 6, 1989--
010021910.303
OSHA citation code: 19100303 B02
Serious169$0$0Feb 6, 1989--
010031910.303
OSHA citation code: 19100303 F
Serious169$0$0Jan 31, 1989--
010041910.304
Wiring design and protection
OSHA citation code: 19100304 F04
Serious269$0$0Jan 31, 1989--
010051910.304
Wiring design and protection
OSHA citation code: 19100304 F05 V
Serious169$0$0Feb 6, 1989--
010061910.305
Wiring methods, components, and equipment for general use
OSHA citation code: 19100305 B02
Serious169$0$0Feb 6, 1989--
010071910.305
Wiring methods, components, and equipment for general use
OSHA citation code: 19100305 G01 IIIA
Serious469$0$0Feb 22, 1989--
020011910.22
OSHA citation code: 19100022 A01
Other120$0$0Jan 27, 1989--
020021910.23
OSHA citation code: 19100023 D01 IV
Other369$0$0Mar 15, 1989--
020031910.23
OSHA citation code: 19100023 D01 V
Other269$0$0Mar 17, 1989--

Showing the 10 violations listed first by citation identifier. This inspection has 17 total violations documented in the U.S. Department of Labor OSHA enforcement database. The complete violation list is available at enforcedata.dol.gov.

Failure to Abate Penalties8 citations

OSHA's enforcement record shows Failure to Abate (FTA) activity recorded against 8 citations issued in this inspection. An FTA penalty is assessed during a follow-up inspection when OSHA's records indicate a previously cited hazard was not corrected by the abatement date. Each row below shows the FTA fields published on the original citation record: the follow-up inspection number, the FTA issuance date, the FTA penalty amount, and any FTA contest or final order date on record.

CitationFTA InspectionFTA IssuanceFTA PenaltyFTA ContestFTA Final Order
01004#104795174Aug 25, 1989---
01007#104795174Aug 25, 1989---
02002#104795174Aug 25, 1989---
02003#104795174Aug 25, 1989---

Showing the 4 FTA rows present in the first 10 citations on this inspection. OSHA's record shows 8 total citations with FTA activity for this inspection. The complete list is available at enforcedata.dol.gov.

Inspections 1 to 5 of 5, newest first

Penalty amounts may differ from final amounts after settlement or judicial review. How to read these records

About these records

A company page groups inspections with the same normalized employer name, city and state; it is not a legal-entity identifier (how pages are grouped).

This page displays public OSHA enforcement data. Status text follows the DOL inspection record first and may include citation-level context when the inspection feed and citation records are out of sync. Penalty amounts shown reflect the latest penalty amounts on record in the DOL database and may differ from initial assessments or final amounts. This is not an official OSHA resource.

OSHA's public enforcement data does not publish a "guilty" or "not guilty" field for inspections. The closest outcome fields available are the citation counts, penalty amounts, contest dates, final-order dates, and the inspection close date shown on this page. How to interpret these status fields. How initial and current penalties are recorded.

OSHA may publish multiple citation rows in the same inspection with the same standard and penalty fields. Separate rows can still differ in OSHA metadata such as citation identifier, recorded instance count, exposed workers, or gravity value. Contest and Final Order columns show citation-level dates from OSHA's enforcement record. A dash means OSHA's record does not currently show that activity for the citation.

Source: U.S. Department of Labor OSHA enforcement data, violations table fields fta_insp_nr, fta_issuance_date, fta_penalty, fta_contest_date, fta_final_order_date. The FTA follow-up inspection is linked via fta_insp_nr to the inspection activity number (exact government key). When the follow-up inspection is not currently on record in SafetyRecord, the inspection number is shown without a link.

Understanding These Penalties

The maximum penalty for a serious violation in 2025 is $16,550 per violation. For willful violations, the range is $11,823 to $165,514. The current penalty column shows the latest amount on record in OSHA's database for each citation. When the current penalty differs from the initial penalty, OSHA's records show that the amount changed during the enforcement process, but this page does not determine the specific reason for each change. Penalty amounts are set by OSHA and adjusted annually for inflation.

Standards cited

1910.305Wiring methods, components, and equipment for general use3 citations · $0
1910.233 citations · $0
1910.373 citations · $0

Other inspected employers in GENESEO, NY

All employers in GENESEO →