Skip to content
SafetyRecord logoSafetyRecord
MCGILL JENSEN INC
$1,380
penalties
22
viol.
2
insp.

MCGILL JENSEN INC

655 FAIRVIEW AVE NO, St Paul, MN 55104

Inspections
2
Oct 1983 to May 1984 · 2 safety, 0 health
Violations
22
across 2 inspections
Penalties on record
$1,380
latest amounts in DOL records
By classification
Serious 8Willful 0Repeat 0Other 14

Having inspection records is common for businesses in regulated industries. Data and methodology

Inspection records

May 8, 1984Follow-Up (F) · Partial scope, Safety#14914832$00 viol.

Inspection #14914832

Dates

Opened
May 8, 1984
Closing Conference Date
May 8, 1984
Closed
Sep 4, 1984

Inspection

Advance Notice
No
Owner Type
Private
Union Status
Yes
Number of Employees
400

Violations and Penalties

Total Violations
0
Initial Penalties
$0
Penalties on Record
$0
Site Address
655 Fairview Ave North, St Paul, MN 55104
Industry
Not classified in OSHA's inspection record.

Follow-Up Inspection: This inspection record is categorized as a follow-up inspection in the DOL OSHA enforcement data. Follow-up inspections are used by OSHA after earlier enforcement activity and can be used to check later compliance status.

Oct 19, 1983Planned (H) · Complete scope, Safety#15389109$1,38022 viol.

Inspection #15389109

Dates

Opened
Oct 19, 1983
Closing Conference Date
Not recorded
Closed
Sep 4, 1984

Inspection

Advance Notice
Not recorded
Owner Type
Not recorded
Union Status
Yes
Number of Employees
400

Violations and Penalties

Total Violations
22
Violation Types
8 serious, 14 other-than-serious
Initial Penalties
$1,380
Penalties on Record
$1,380
Site Address
655 Fairview Ave No, St Paul, MN 55104
Industry
Not classified in OSHA's inspection record.

Planned Inspection: This inspection record is categorized as a planned inspection in the DOL OSHA enforcement data. Planned inspections are part of OSHA's scheduled enforcement activity rather than being opened directly from a complaint or reported incident at that worksite.

Violations

Violation list (22 of 22 shown)
CitationStandardTypeInstancesExposedInitialCurrentAbatementContestFinal Order
010011910.219
Mechanical Power-Transmission Apparatus
OSHA citation code: 19100219 D01
Other5-$0$0Dec 29, 1983--
010021910.37
Maintenance, Safeguards, and Operational Features for Exit Routes
OSHA citation code: 19100037 Q02
Other1-$0$0Dec 14, 1983--
010031910.23
Ladders
OSHA citation code: 19100023 D01 IV
Other2-$0$0Nov 15, 1983--
010041910.157
Portable Fire Extinguishers
OSHA citation code: 19100157 C01
Other1-$0$0Nov 18, 1983--
010051910.37
Maintenance, Safeguards, and Operational Features for Exit Routes
OSHA citation code: 19100037 K02
Other1-$90$90Nov 18, 1983--
010061910.23
Ladders
OSHA citation code: 19100023 C01
Other1-$0$0Dec 14, 1983--
010071910.219
Mechanical Power-Transmission Apparatus
OSHA citation code: 19100219 C02
Other1-$0$0Dec 29, 1983--
010081910.212
General Requirements for All Machines (Machine Guarding)
OSHA citation code: 19100212 A05
Other1-$0$0Nov 18, 1983--
010091910.23
Ladders
OSHA citation code: 19100023 C03
Other1-$0$0Nov 22, 1983--
010101910.106
Flammable Liquids
OSHA citation code: 19100106 E09 III
Other1-$90$90Dec 14, 1983--
010111910.106
Flammable Liquids
OSHA citation code: 19100106 E06 I
Other1-$72$72Nov 18, 1983--
010121910.24
Step Bolts and Manhole Steps
OSHA citation code: 19100024 B
Other1-$0$0Dec 14, 1983--
010131910.242
Hand and Portable Powered Tools and Equipment, General
OSHA citation code: 19100242 B
Other1-$72$72Nov 18, 1983--
010141910.95
Occupational Noise Exposure
OSHA citation code: 19100095 L01
Other1-$0$0Nov 18, 1983--
020011910.219
Mechanical Power-Transmission Apparatus
OSHA citation code: 19100219 D01
Serious3-$150$150Dec 29, 1983--
020021910.106
Flammable Liquids
OSHA citation code: 19100106 E06 I
Serious1-$150$150Nov 18, 1983--
020031910.212
General Requirements for All Machines (Machine Guarding)
OSHA citation code: 19100212 A03 II
Serious2-$150$150Sep 3, 1984--
020041910.212
General Requirements for All Machines (Machine Guarding)
OSHA citation code: 19100212 A05
Serious2-$96$96Dec 14, 1983--
020051910.219
Mechanical Power-Transmission Apparatus
OSHA citation code: 19100219 I02
Serious1-$132$132Nov 30, 1983--
020061910.23
Ladders
OSHA citation code: 19100023 B01
Serious2-$150$150Jan 19, 1984--
020071910.303
Electrical - General Requirements
OSHA citation code: 19100303 G02 IB
Serious1-$114$114Nov 18, 1983--
020081910.23
Ladders
OSHA citation code: 19100023 C01
Serious1-$114$114Nov 22, 1983--

Failure to Abate Penalties2 citations, $656 in FTA penalties on record

OSHA's enforcement record shows Failure to Abate (FTA) activity recorded against 2 citations issued in this inspection. An FTA penalty is assessed during a follow-up inspection when OSHA's records indicate a previously cited hazard was not corrected by the abatement date. Each row below shows the FTA fields published on the original citation record: the follow-up inspection number, the FTA issuance date, the FTA penalty amount, and any FTA contest or final order date on record.

CitationFTA InspectionFTA IssuanceFTA PenaltyFTA ContestFTA Final Order
01002#14914832May 17, 1984$281--
02003#14914832May 17, 1984$375--
Inspections 1 to 2 of 2, newest first

Penalty amounts may differ from final amounts after settlement or judicial review. How to read these records

About these records

A company page groups inspections with the same normalized employer name, city and state; it is not a legal-entity identifier (how pages are grouped).

This page displays public OSHA enforcement data. Status text follows the DOL inspection record first and may include citation-level context when the inspection feed and citation records are out of sync. Penalty amounts shown reflect the latest penalty amounts on record in the DOL database and may differ from initial assessments or final amounts. This is not an official OSHA resource.

OSHA's public enforcement data does not publish a "guilty" or "not guilty" field for inspections. The closest outcome fields available are the citation counts, penalty amounts, contest dates, final-order dates, and the inspection close date shown on this page. How to interpret these status fields. How initial and current penalties are recorded.

OSHA may publish multiple citation rows in the same inspection with the same standard and penalty fields. Separate rows can still differ in OSHA metadata such as citation identifier, recorded instance count, exposed workers, or gravity value. Contest and Final Order columns show citation-level dates from OSHA's enforcement record. A dash means OSHA's record does not currently show that activity for the citation.

Source: U.S. Department of Labor OSHA enforcement data, violations table fields fta_insp_nr, fta_issuance_date, fta_penalty, fta_contest_date, fta_final_order_date. The FTA follow-up inspection is linked via fta_insp_nr to the inspection activity number (exact government key). When the follow-up inspection is not currently on record in SafetyRecord, the inspection number is shown without a link.

Understanding These Penalties

The maximum penalty for a serious violation in 2025 is $16,550 per violation. For willful violations, the range is $11,823 to $165,514. The current penalty column shows the latest amount on record in OSHA's database for each citation. When the current penalty differs from the initial penalty, OSHA's records show that the amount changed during the enforcement process, but this page does not determine the specific reason for each change. Penalty amounts are set by OSHA and adjusted annually for inflation.

Standards cited

1910.23Ladders5 citations · $264
1910.219Mechanical Power-Transmission Apparatus4 citations · $282
1910.212General Requirements for All Machines (Machine Guarding)3 citations · $246

Other inspected employers in St Paul, MN

All employers in St Paul →