AMERICAN STONE FABRICATORS, INC.
1500 W. HAMPDEN, SHERIDAN, CO 80110 · NAICS 327991 Cut Stone and Stone Product Manufacturing
Having inspection records is common for businesses in regulated industries. Data and methodology
Inspection records
May 9, 2007#310590112May 9, 2007Follow-Up (F) · Partial scope, Health#310590112$00 viol.0 violations$0 in penalties
Inspection #310590112
Dates
- Opened
- May 9, 2007
- Closing Conference Date
- Jun 27, 2007
- Closed
- Jun 27, 2007
Inspection
- Advance Notice
- No
- Owner Type
- Private
- Union Status
- No
- Number of Employees
- 7
Violations and Penalties
- Total Violations
- 0
- Initial Penalties
- $0
- Penalties on Record
- $0
- Site Address
- 1500 W. Hampden, Sheridan, CO 80110
- Industry
- 327991 Cut Stone and Stone Product Manufacturing
Follow-Up Inspection: This inspection record is categorized as a follow-up inspection in the DOL OSHA enforcement data. Follow-up inspections are used by OSHA after earlier enforcement activity and can be used to check later compliance status.
Chemical Exposure Sampling1 substance sampled
Air monitoring samples collected by OSHA during this inspection. Results grouped by substance.
| Substance | Samples | Result Range | Unit |
|---|---|---|---|
| Gravimetric DeterminationQC | 32P / 1A | 0.0393 - 0.1217 | mg/m³ |
| Sample WeightQC | 32P / 1A | 0.024 - 0.071 | mg |
| Silica, Crystalline Quartz (Respirable Fraction) | 32P / 1A | 0 | % |
Jul 17, 2006#309195352Jul 17, 2006Monitoring (D) · Partial scope, Safety#309195352$00 viol.0 violations$0 in penalties
Inspection #309195352
Dates
- Opened
- Jul 17, 2006
- Closing Conference Date
- Jul 17, 2006
- Closed
- Jul 17, 2006
Inspection
- Advance Notice
- No
- Owner Type
- Private
- Union Status
- No
- Number of Employees
- 12
Violations and Penalties
- Total Violations
- 0
- Initial Penalties
- $0
- Penalties on Record
- $0
- Site Address
- 1500 W. Hampden, Sheridan, CO 80110
- Industry
- 327991 Cut Stone and Stone Product Manufacturing
Monitoring Inspection: This inspection record is categorized as a monitoring inspection in the DOL OSHA enforcement data. The public DOL category label is preserved here without adding extra interpretation beyond the government label.
Jul 17, 2006#309195295Jul 17, 2006Monitoring (D) · Partial scope, Health#309195295$00 viol.0 violations$0 in penalties
Inspection #309195295
Dates
- Opened
- Jul 17, 2006
- Closing Conference Date
- Aug 10, 2006
- Closed
- Aug 10, 2006
Inspection
- Advance Notice
- No
- Owner Type
- Private
- Union Status
- No
- Number of Employees
- 12
Violations and Penalties
- Total Violations
- 0
- Initial Penalties
- $0
- Penalties on Record
- $0
- Site Address
- 1500 W. Hampden, Sheridan, CO 80110
- Industry
- 327991 Cut Stone and Stone Product Manufacturing
Monitoring Inspection: This inspection record is categorized as a monitoring inspection in the DOL OSHA enforcement data. The public DOL category label is preserved here without adding extra interpretation beyond the government label.
Chemical Exposure Sampling1 substance sampled
Air monitoring samples collected by OSHA during this inspection. Results grouped by substance.
| Substance | Samples | Result Range | Unit |
|---|---|---|---|
| Gravimetric DeterminationQC | 4 | 0 - 0.643 | mg/m³ |
| Sample WeightQC | 4 | 0 - 0.449 | mg |
| Silica, Crystalline Quartz (Respirable Fraction) | 4 | 0 - 6 | % |
Nov 22, 2005#309192136Nov 22, 2005Referral (C) · Complete scope, Safety#309192136$11,00013 viol.13 violations$11,000 in penalties
Inspection #309192136
Dates
- Opened
- Nov 22, 2005
- Closing Conference Date
- May 1, 2006
- Contested
- May 25, 2006
- Final Order
- Apr 5, 2007
- Closed
- Jul 5, 2012
Inspection
- Advance Notice
- No
- Owner Type
- Private
- Union Status
- No
- Number of Employees
- 15
- Related Activity
- 1 referral
Violations and Penalties
- Total Violations
- 13
- Violation Types
- 13 serious
- Initial Penalties
- $22,000
- Penalties on Record
- $11,000
- Site Address
- 1500 W. Hampden, Sheridan, CO 80110
- Industry
- 327991 Cut Stone and Stone Product Manufacturing
Referral Inspection: This inspection record is categorized as a referral inspection in the DOL OSHA enforcement data. Referral inspections can result from another agency, another OSHA activity, or another source referring a potential hazard to OSHA.
Violations
Violation list (6 of 13 shown)
| Citation | Standard | Type | Instances | Exposed | Initial | Current | Abatement | Contest | Final Order |
|---|---|---|---|---|---|---|---|---|---|
| 01001 | 1910.23 OSHA citation code: 19100023 A08 | Serious | 1 | 15 | $2,000 | $1,000 | May 16, 2006 | May 25, 2006 | Apr 5, 2007 |
| 01002 | 1910.133 Eye and Face Protection OSHA citation code: 19100133 A01 | Serious | 2 | 15 | $2,800 | $1,400 | May 16, 2006 | May 25, 2006 | Apr 5, 2007 |
| 01003A | 1910.157 Portable Fire Extinguishers OSHA citation code: 19100157 C04 | Serious | 1 | 15 | $1,400 | $700 | May 16, 2006 | May 25, 2006 | Apr 5, 2007 |
| 01003B | 1910.157 Portable Fire Extinguishers OSHA citation code: 19100157 E03 | Serious | 1 | 15 | $0 | $0 | May 16, 2006 | May 25, 2006 | Apr 5, 2007 |
| 01004 | 1910.176 Handling Materials - General OSHA citation code: 19100176 B | Serious | 3 | 15 | $2,800 | $1,400 | May 16, 2006 | May 25, 2006 | Apr 5, 2007 |
| 01005 | 1910.242 Hand and Portable Powered Tools and Equipment, General OSHA citation code: 19100242 B | Serious | 1 | 15 | $1,400 | $700 | May 16, 2006 | May 25, 2006 | Apr 5, 2007 |
Showing the 6 violations listed first by citation identifier. This inspection has 13 total violations documented in the U.S. Department of Labor OSHA enforcement database. The complete violation list is available at enforcedata.dol.gov.
Nov 9, 2005#309190247Nov 9, 2005Follow-Up (F) · Partial scope, Health#309190247$2,0005 viol.5 violations$2,000 in penalties
Inspection #309190247
Dates
- Opened
- Nov 9, 2005
- Closing Conference Date
- May 3, 2006
- Contested
- May 26, 2006
- Final Order
- Apr 5, 2007
- Closed
- Jun 19, 2012
Inspection
- Advance Notice
- No
- Owner Type
- Private
- Union Status
- No
- Number of Employees
- 15
Violations and Penalties
- Total Violations
- 5
- Violation Types
- 5 serious
- Initial Penalties
- $4,000
- Penalties on Record
- $2,000
- Site Address
- 1500 W. Hampden, Sheridan, CO 80110
- Industry
- 327991 Cut Stone and Stone Product Manufacturing
Follow-Up Inspection: This inspection record is categorized as a follow-up inspection in the DOL OSHA enforcement data. Follow-up inspections are used by OSHA after earlier enforcement activity and can be used to check later compliance status.
Chemical Exposure Sampling1 substance sampled
Air monitoring samples collected by OSHA during this inspection. Results grouped by substance.
| Substance | Samples | Result Range | Unit |
|---|---|---|---|
| Gravimetric DeterminationQC | 1613P / 3A | 0.2559 - 1.5407 | mg/m³ |
| Sample WeightQC | 1613P / 3A | 0.055 - 1.076 | mg |
| Silica, Crystalline Quartz (Respirable Fraction) | 1613P / 3A | 0 - 20 | % |
Violations
Violation list (5 of 5 shown)
| Citation | Standard | Type | Instances | Exposed | Initial | Current | Abatement | Contest | Final Order |
|---|---|---|---|---|---|---|---|---|---|
| 01001A | 1910.134 Respiratory Protection OSHA citation code: 19100134 C01 | Serious | 1 | 14 | $2,000 | $1,000 | Jun 23, 2006 | May 26, 2006 | Apr 5, 2007 |
| 01001B | 1910.134 Respiratory Protection OSHA citation code: 19100134 E01 | Serious | 1 | 14 | $0 | $0 | Jun 23, 2006 | May 26, 2006 | Apr 5, 2007 |
| 01001C | 1910.134 Respiratory Protection OSHA citation code: 19100134 K01 | Serious | 1 | 14 | $0 | $0 | Jun 23, 2006 | May 26, 2006 | Apr 5, 2007 |
| 01002A | 1910.1200 Hazard Communication OSHA citation code: 19101200 E01 | Serious | 1 | 14 | $2,000 | $1,000 | Jun 23, 2006 | May 26, 2006 | Apr 5, 2007 |
| 01002B | 1910.1200 Hazard Communication OSHA citation code: 19101200 H | Serious | 1 | 14 | $0 | $0 | Jun 23, 2006 | May 26, 2006 | Apr 5, 2007 |
Apr 27, 2005#307654574Apr 27, 2005Planned (H) · Complete scope, Health#307654574$8,4003 viol.3 violations$8,400 in penalties
Inspection #307654574
Dates
- Opened
- Apr 27, 2005
- Closing Conference Date
- Jun 16, 2005
- Contested
- Jul 7, 2005
- Final Order
- Oct 21, 2005
- Closed
- Jun 19, 2012
Inspection
- Advance Notice
- No
- Owner Type
- Private
- Union Status
- No
- Number of Employees
- 14
Violations and Penalties
- Total Violations
- 3
- Violation Types
- 1 serious, 2 repeat
- Initial Penalties
- $16,800
- Penalties on Record
- $8,400
- Site Address
- 1500 W. Hampden, Sheridan, CO 80110
- Industry
- 327991 Cut Stone and Stone Product Manufacturing
Planned Inspection: This inspection record is categorized as a planned inspection in the DOL OSHA enforcement data. Planned inspections are part of OSHA's scheduled enforcement activity rather than being opened directly from a complaint or reported incident at that worksite.
Chemical Exposure Sampling1 substance sampled
Air monitoring samples collected by OSHA during this inspection. Results grouped by substance.
| Substance | Samples | Result Range | Unit |
|---|---|---|---|
| Gravimetric DeterminationQC | 4 | 1.0518 - 10.0807 | mg/m³ |
| Sample WeightQC | 4 | 0.784 - 7.347 | mg |
| Silica, Crystalline Quartz (Respirable Fraction) | 4 | 4.9 - 12 | % |
Violations
Violation list (3 of 3 shown)
| Citation | Standard | Type | Instances | Exposed | Initial | Current | Abatement | Contest | Final Order |
|---|---|---|---|---|---|---|---|---|---|
| 01001 | 5A0001 General Duty Clause, Section 5(a)(1) | Serious | 1 | 4 | $2,800 | $1,400 | Aug 6, 2005 | Jul 7, 2005 | Oct 21, 2005 |
| 02001A | 1910.1000 Air Contaminants OSHA citation code: 19101000 C | Repeat | 2 | 4 | $14,000 | $7,000 | Sep 17, 2005 | Jul 7, 2005 | Oct 21, 2005 |
| 02001B | 1910.1000 Air Contaminants OSHA citation code: 19101000 E | Repeat | 2 | 4 | $0 | $0 | Sep 17, 2005 | Jul 7, 2005 | Oct 21, 2005 |
Failure to Abate Penalties2 citations, $42,000 in FTA penalties on record
OSHA's enforcement record shows Failure to Abate (FTA) activity recorded against 2 citations issued in this inspection. An FTA penalty is assessed during a follow-up inspection when OSHA's records indicate a previously cited hazard was not corrected by the abatement date. Each row below shows the FTA fields published on the original citation record: the follow-up inspection number, the FTA issuance date, the FTA penalty amount, and any FTA contest or final order date on record.
| Citation | FTA Inspection | FTA Issuance | FTA Penalty | FTA Contest | FTA Final Order |
|---|---|---|---|---|---|
| 02001A | #309190247 | May 8, 2006 | $42,000 | Nov 11, 2005 | Jul 23, 2007 |
| 02001B | #309190247 | May 8, 2006 | - | Nov 11, 2005 | Jul 23, 2007 |
Oct 2, 2002#305168734Oct 2, 2002Follow-Up (F) · Partial scope, Safety#305168734$03 viol.3 violations$0 in penalties
Inspection #305168734
Dates
- Opened
- Oct 2, 2002
- Closing Conference Date
- Oct 2, 2002
- Contested
- Feb 27, 2003
- Final Order
- Apr 29, 2003
- Closed
- Dec 5, 2003
Inspection
- Advance Notice
- No
- Owner Type
- Private
- Union Status
- No
- Number of Employees
- 17
Violations and Penalties
- Total Violations
- 3
- Violation Types
- 3 serious
- Initial Penalties
- $11,600
- Penalties on Record
- $0
- Site Address
- 1500 W. Hampden, Sheridan, CO 80110
- Industry
- 327991 Cut Stone and Stone Product Manufacturing
Follow-Up Inspection: This inspection record is categorized as a follow-up inspection in the DOL OSHA enforcement data. Follow-up inspections are used by OSHA after earlier enforcement activity and can be used to check later compliance status.
Chemical Exposure Sampling1 substance sampled
Air monitoring samples collected by OSHA during this inspection. Results grouped by substance.
| Substance | Samples | Result Range | Unit |
|---|---|---|---|
| Gravimetric DeterminationQC | 5 | 0.7766 - 4.8818 | mg/m³ |
| Sample WeightQC | 5 | 0.58 - 3.363 | mg |
| Silica, Crystalline Quartz (Respirable Fraction) | 5 | 11 - 15 | % |
Violations
Violation list (3 of 3 shown)
| Citation | Standard | Type | Instances | Exposed | Initial | Current | Abatement | Contest | Final Order |
|---|---|---|---|---|---|---|---|---|---|
| 01001 | 1910.243 Guarding of Portable Powered Tools OSHA citation code: 19100243 C03 | Serious | 2 | 2 | $5,600 | $0 | Jan 15, 2003 | Feb 27, 2003 | Apr 29, 2003 |
| 01002 | 1910.305 Wiring methods, components, and equipment for general use OSHA citation code: 19100305 G01 III | Serious | 1 | 5 | $2,000 | $0 | Jan 15, 2003 | Feb 27, 2003 | Apr 29, 2003 |
| 01003 | 1910.334 Electrical - Use of Equipment OSHA citation code: 19100334 A02 II | Serious | 1 | 6 | $4,000 | $0 | Jan 15, 2003 | Feb 27, 2003 | Apr 29, 2003 |
Apr 9, 2002#305166118Apr 9, 2002Referral (C) · Partial scope, Safety#305166118$8,5509 viol.9 violations$8,550 in penalties
Inspection #305166118
Dates
- Opened
- Apr 9, 2002
- Closing Conference Date
- May 1, 2002
- Closed
- Dec 21, 2004
Inspection
- Advance Notice
- No
- Owner Type
- Private
- Union Status
- No
- Number of Employees
- 17
- Related Activity
- 1 referral
Violations and Penalties
- Total Violations
- 9
- Violation Types
- 4 serious, 5 other-than-serious
- Initial Penalties
- $8,550
- Penalties on Record
- $8,550
- Site Address
- 1500 W. Hampden, Sheridan, CO 80110
- Industry
- 327991 Cut Stone and Stone Product Manufacturing
Referral Inspection: This inspection record is categorized as a referral inspection in the DOL OSHA enforcement data. Referral inspections can result from another agency, another OSHA activity, or another source referring a potential hazard to OSHA.
Violations
Violation list (6 of 9 shown)
| Citation | Standard | Type | Instances | Exposed | Initial | Current | Abatement | Contest | Final Order |
|---|---|---|---|---|---|---|---|---|---|
| 01001 | 1910.95 Occupational Noise Exposure OSHA citation code: 19100095 C01 | Other | 2 | 2 | $1,050 | $1,050 | Jul 17, 2002 | - | - |
| 01002 | 1910.133 Eye and Face Protection OSHA citation code: 19100133 A01 | Serious | 1 | 1 | $1,500 | $1,500 | Jul 3, 2002 | - | - |
| 01003 | 1910.243 Guarding of Portable Powered Tools OSHA citation code: 19100243 C03 | Serious | 4 | 5 | $1,500 | $1,500 | Jul 11, 2002 | - | - |
| 01004 | 1910.305 Wiring methods, components, and equipment for general use OSHA citation code: 19100305 B02 | Other | 1 | 4 | $1,500 | $1,500 | Jun 19, 2002 | - | - |
| 01005 | 1910.305 Wiring methods, components, and equipment for general use OSHA citation code: 19100305 G01 III | Serious | 4 | 2 | $750 | $750 | Jun 19, 2002 | - | - |
| 01006 | 1910.334 Electrical - Use of Equipment OSHA citation code: 19100334 A02 II | Serious | 1 | 4 | $750 | $750 | Jun 19, 2002 | - | - |
Showing the 6 violations listed first by citation identifier. This inspection has 9 total violations documented in the U.S. Department of Labor OSHA enforcement database. The complete violation list is available at enforcedata.dol.gov.
Penalty amounts may differ from final amounts after settlement or judicial review. How to read these records
About these records
A company page groups inspections with the same normalized employer name, city and state; it is not a legal-entity identifier (how pages are grouped).
This page displays public OSHA enforcement data. Status text follows the DOL inspection record first and may include citation-level context when the inspection feed and citation records are out of sync. Penalty amounts shown reflect the latest penalty amounts on record in the DOL database and may differ from initial assessments or final amounts. This is not an official OSHA resource.
OSHA's public enforcement data does not publish a "guilty" or "not guilty" field for inspections. The closest outcome fields available are the citation counts, penalty amounts, contest dates, final-order dates, and the inspection close date shown on this page. How to interpret these status fields. How initial and current penalties are recorded.
OSHA may publish multiple citation rows in the same inspection with the same standard and penalty fields. Separate rows can still differ in OSHA metadata such as citation identifier, recorded instance count, exposed workers, or gravity value. Contest and Final Order columns show citation-level dates from OSHA's enforcement record. A dash means OSHA's record does not currently show that activity for the citation.
Source: OSHA chemical exposure sampling data (OSHA Information System). P = Personal (worker breathing zone), A = Area (general air). Rows marked QC are analytical quality control measurements, not chemical exposures. OSHA PEL (Permissible Exposure Limit) values from the OSHA Occupational Chemical Database, matched via IMIS substance code (analyte code) (exact government key).
Source: U.S. Department of Labor OSHA enforcement data, violations table fields fta_insp_nr, fta_issuance_date, fta_penalty, fta_contest_date, fta_final_order_date. The FTA follow-up inspection is linked via fta_insp_nr to the inspection activity number (exact government key). When the follow-up inspection is not currently on record in SafetyRecord, the inspection number is shown without a link.
Understanding These Penalties
The maximum penalty for a serious violation in 2025 is $16,550 per violation. For willful violations, the range is $11,823 to $165,514. The current penalty column shows the latest amount on record in OSHA's database for each citation. When the current penalty differs from the initial penalty, OSHA's records show that the amount changed during the enforcement process, but this page does not determine the specific reason for each change. Penalty amounts are set by OSHA and adjusted annually for inflation.
8 inspections, 2002 to 2007. Each row is one inspection; point at or tap a row for its dates and totals.
Source: DOL OSHA enforcement data (inspections and violations), linked via activity_nr (exact government key).
Penalty changes: Amounts shown reflect what OSHA's enforcement record publishes. The reason for any change is not stated unless OSHA's record explicitly says so.
Short cases: When a case closed soon after it opened, the closed marker is drawn slightly to the right so both markers stay visible. Each row's card shows the exact dates.
Standards cited
Chemical exposure sampling
Sample results are listed in the record of each inspection that collected them.
Industry comparison
Nonmetallic Mineral Product Manufacturing, 16,974 employers with OSHA inspections. Arithmetic from DOL records.
BLS 2024 survey: cut stone and stone product manufacturing reported 6.2 injuries and illnesses per 100 full-time workers (total recordable cases, national, private industry; relative standard error 18.6%). This is an industry-wide average from a federal survey, not a measurement of this establishment. Source