Skip to content
SafetyRecord logoSafetyRecord

Inspection #311684781

This page displays public OSHA enforcement data. Penalty amounts shown reflect the latest penalty amounts on record in the DOL database and may differ from initial assessments or final amounts. This is not an official OSHA resource.

The Occupational Safety and Health Administration (OSHA) conducted a planned inspection of TRIPLE S CORPORATION at 176 Ragland Rd., Beckley, WV 25801 on Dec 3, 2008. The inspection scope was complete. The case was closed on Oct 20, 2009.

OSHA documented 21 violations (13 serious, 8 other-than-serious) with total penalties on record of $12,000.

OSHA collected 6 air monitoring samples covering 3 substances during this inspection, including Benzene, Titanium Dioxide (Total Dust), Xylene.

This employer has 3 other OSHA inspections on record at this establishment.

Inspection Details
Inspection Number
311684781
Type
Planned (H)
Scope
Complete
Opened
Dec 3, 2008
Closed
Oct 20, 2009
Total Violations
21
Penalties on Record
$12,000
Planned Inspection: This inspection record is categorized as a planned inspection in the DOL OSHA enforcement data. Planned inspections are part of OSHA's scheduled enforcement activity rather than being opened directly from a complaint or reported incident at that worksite.
Establishment
Address
176 Ragland Rd., Beckley, WV 25801
Industry
332312 Fabricated Structural Metal Manufacturing
Other Inspections of This Employer3 on record

Other OSHA inspections of the same establishment. Linked via establishment ID (exact government key).

Chemical Exposure Sampling3 substances sampled

Air monitoring samples collected by OSHA during this inspection. Results grouped by substance.

SubstanceSamplesResult RangeUnit
Benzene20 - 0.0813ppm
Titanium Dioxide (Total Dust)20 - 1.9mg/m³
Xylene20.459757 - 13.041536ppm

Source: OSHA chemical exposure sampling data (OSHA Information System). P = Personal (worker breathing zone), A = Area (general air). Rows marked QC are analytical quality control measurements, not chemical exposures. OSHA PEL (Permissible Exposure Limit) values from the OSHA Occupational Chemical Database, matched via IMIS substance code (analyte code) (exact government key).

Violations
CitationStandardTypeInitialCurrentAbatement
01001A
19100095 D01
Occupational Noise Exposure
Serious$2,500$2,000Feb 13, 2009
01001B
19100095 G01
Occupational Noise Exposure
Serious$0$0Mar 2, 2009
01001C
19100095 K01
Occupational Noise Exposure
Serious$0$0Feb 13, 2009
01002
19100107 C05
Spray Finishing Using Flammable and Combustible Materials
Serious$2,500$2,000Feb 9, 2009
01003
19100107 E02
Spray Finishing Using Flammable and Combustible Materials
Serious$2,500$2,000Feb 11, 2009
01004A
19100134 I07
Respiratory Protection
Serious$2,500$1,400Feb 13, 2009
01004B
19100134 C01
Respiratory Protection
Serious$0$0Feb 13, 2009
01005A
19100184 I01
Slings
Serious$1,750$1,000Feb 9, 2009
01005B
19100184 I09 IV
Slings
Serious$0$0Feb 9, 2009
01006
19100252 B02 III
Welding, Cutting, and Brazing - General Requirements
Serious$2,500$1,500Feb 9, 2009
01007A
19100253 C02 II
Oxygen-Fuel Gas Welding and Cutting
Serious$2,500$1,500Feb 13, 2009
01007B
19100253 C03 V
Oxygen-Fuel Gas Welding and Cutting
Serious$0$0Feb 9, 2009
01008
19101028 E02 II
Benzene
Serious$1,250$600Feb 9, 2009
02001
19040029 B01
Forms
Other$0$0Feb 9, 2009
02002
19040032 B03
Annual Summary
Other$0$0Feb 9, 2009
02003
19040032 B06
Annual Summary
Other$0$0Feb 9, 2009
02004
19100147 C07 IV
Control of Hazardous Energy (Lockout/Tagout)
Other$0$0Feb 9, 2009
02005
19100178 L04 III
Powered Industrial Trucks
Other$0$0Feb 11, 2009
02006
19100179 J02 III
Overhead and Gantry Cranes
Other$0$0Feb 11, 2009
02007
19100179 J02 IV
Overhead and Gantry Cranes
Other$0$0Feb 11, 2009
02008
19100179 M01
Overhead and Gantry Cranes
Other$0$0Feb 11, 2009

Understanding These Penalties

The maximum penalty for a serious violation in 2025 is $16,550 per violation. For willful violations, the range is $11,823 to $165,514. The current penalty column shows the latest amount on record in OSHA's database for each citation. When the current penalty differs from the initial penalty, OSHA's records show that the amount changed during the enforcement process, but this page does not determine the specific reason for each change. Penalty amounts are set by OSHA and adjusted annually for inflation.

Data Source and Methodology

Data synced daily

Data on this page comes from the U.S. Department of Labor's OSHA enforcement database, accessed via the DOL public data API. Records are updated daily. We strive for accuracy, but errors in data processing or establishment matching are possible. Penalty amounts reflect the latest penalty amounts on record in the DOL database and may differ from initial assessments or final amounts after informal conference, settlement, or judicial review. Establishment matching is based on employer name and location as reported in inspection records; some establishments may appear under multiple name variations. Chemical exposure sampling data and OSHA Permissible Exposure Limits (PELs) are sourced from the OSHA Occupational Chemical Database, matched via IMIS analyte codes. If you believe any record is inaccurate, please report it and we will investigate. This product uses the DOL Data API but is not endorsed or certified by the DOL. For official and authoritative records, visit osha.gov.