Skip to content
SafetyRecord logoSafetyRecord

Inspection #344629084

Closed

This page displays public OSHA enforcement data. Status text follows the DOL inspection record first and may include citation-level context when the inspection feed and citation records are out of sync. Penalty amounts shown reflect the latest penalty amounts on record in the DOL database and may differ from initial assessments or final amounts. This is not an official OSHA resource.

The Occupational Safety and Health Administration (OSHA) conducted a accident inspection of MONTGOMERY COUNTY PUBLIC SCHOOLS at Northwood High School 919 University Blvd., West, Silver Spring, MD 20901 on Feb 13, 2020. The inspection scope was complete. The case was closed on Jul 13, 2022.

OSHA documented 16 violations (6 serious, 10 other-than-serious) with total penalties on record of $0. 1 incident investigation summary is associated with this inspection. This inspection is linked to 1 accident report in OSHA records.

This employer has 11 other OSHA inspections on record at this establishment.

Inspection Details

Inspection Number
344629084
Type
Accident (A)
Scope
Complete
Opened
Feb 13, 2020
Closed
Jul 13, 2022
Final Order
Jul 13, 2022
Total Violations
16
Penalties on Record
$0
Related Activity
1 accident
Accident Inspection: This inspection record is categorized as an accident inspection in the U.S. Department of Labor OSHA enforcement data. Employers must report work-related fatalities within 8 hours, and work-related inpatient hospitalizations, amputations, or losses of an eye within 24 hours. An accident-related inspection does not by itself determine fault.

Establishment

Address
Northwood High School 919 University Blvd., West, Silver Spring, MD 20901
Industry
611110 Elementary and Secondary Schools

Other Inspections of This Employer11 on record

Other OSHA inspections of the same establishment. Linked via establishment ID (exact government key).

Incident Investigation Summaries

Incident investigation summaries linked to this inspection through OSHA's accident and injury enforcement data. These summaries describe the reported incident. The enforcement outcome for the linked inspection appears immediately below.

HospitalizationFeb 11, 2020

Employee fractures hip in fall onto hard tile kitchen floor

Source: U.S. Department of Labor OSHA incident investigation data (`osha_accident` + `osha_accident_injury`). Linked via `rel_insp_nr` to the inspection activity number (exact government key).

Enforcement Outcome

OSHA's public enforcement data does not publish a "guilty" or "not guilty" field for inspections. The closest outcome fields available are the citation counts, penalty amounts, contest dates, final-order dates, and the inspection close date shown on this page.

Status on Record
Closed

Inspection closed Jul 13, 2022.

Citations on Record
16

6 serious, 10 other-than-serious.

Initial Penalties
$0

Citation amounts as first recorded in OSHA's penalty fields.

Current Penalties
$0

Current and initial penalty totals are the same on record.

Final orders are recorded through Jul 13, 2022. Penalty changes shown on this page reflect the latest amounts published in OSHA's enforcement data.

Violations

OSHA may publish multiple citation rows in the same inspection with the same standard and penalty fields. Separate rows can still differ in OSHA metadata such as citation identifier, recorded instance count, exposed workers, or gravity value. Contest and Final Order columns show citation-level dates from OSHA's enforcement record. A dash means OSHA's record does not currently show that activity for the citation.

CitationStandardTypeInitialCurrentAbatementContestFinal Order
010011910.22
Walking-Working Surfaces - General Requirements
OSHA citation code: 19100022 A02
Serious$0$0Jun 25, 2020-Jul 13, 2022
010021910.28
Duty to Have Fall Protection
OSHA citation code: 19100028 B03 IV
Serious$0$0Jun 25, 2020-Jul 13, 2022
010031910.28
Duty to Have Fall Protection
OSHA citation code: 19100028 B13 I
Serious$0$0Jun 25, 2020-Jul 13, 2022
010041910.30
Training Requirements for Fall Protection
OSHA citation code: 19100030 A01
Serious$0$0Jul 21, 2020-Jul 13, 2022
010051910.304
Electrical - Wiring Design and Protection
OSHA citation code: 19100304 G06 VI C 1
Serious$0$0-Jul 13, 2022
010061910.305
Electrical - Wiring Methods, Components, and Equipment
OSHA citation code: 19100305 B01 II
Serious$0$0Jun 25, 2020-Jul 13, 2022
020011910.28
Duty to Have Fall Protection
OSHA citation code: 19100028 B11 II
Other$0$0Jun 25, 2020-Jul 13, 2022
020021910.303
Electrical - General Requirements
OSHA citation code: 19100303 B07 I
Other$0$0-Jul 13, 2022
020031910.303
Electrical - General Requirements
OSHA citation code: 19100303 E01 I
Other$0$0Jun 25, 2020-Jul 13, 2022
020041910.303
Electrical - General Requirements
OSHA citation code: 19100303 E01 II
Other$0$0Jun 25, 2020-Jul 13, 2022
020051910.303
Electrical - General Requirements
OSHA citation code: 19100303 F02
Other$0$0Jun 25, 2020-Jul 13, 2022
020061910.303
Electrical - General Requirements
OSHA citation code: 19100303 G01 II
Other$0$0Jun 25, 2020-Jul 13, 2022
020071910.303
Electrical - General Requirements
OSHA citation code: 19100303 G02 II
Other$0$0Jun 25, 2020-Jul 13, 2022
020081910.305
Electrical - Wiring Methods, Components, and Equipment
OSHA citation code: 19100305 B02 I
Other$0$0Jun 25, 2020-Jul 13, 2022
020091910.305
Electrical - Wiring Methods, Components, and Equipment
OSHA citation code: 19100305 G02 III
Other$0$0Jun 25, 2020-Jul 13, 2022
020101910.334
Electrical - Use of Equipment
OSHA citation code: 19100334 A03 I
Other$0$0Jun 25, 2020-Jul 13, 2022

Failure to Abate Penalties4 citations

OSHA's enforcement record shows Failure to Abate (FTA) activity recorded against 4 citationsissued in this inspection. An FTA penalty is assessed during a follow-up inspection when OSHA's records indicate a previously cited hazard was not corrected by the abatement date. Each row below shows the FTA fields published on the original citation record: the follow-up inspection number, the FTA issuance date, the FTA penalty amount, and any FTA contest or final order date on record.

CitationFTA InspectionFTA IssuanceFTA PenaltyFTA ContestFTA Final Order
02001#1586152Jun 16, 2022--Jul 13, 2022
02003#1586152Jun 16, 2022--Jul 13, 2022
02004#1586152Jun 16, 2022--Jul 13, 2022
02007#1586152Jun 16, 2022--Jul 13, 2022

Source: U.S. Department of Labor OSHA enforcement data, violations table fields fta_insp_nr, fta_issuance_date, fta_penalty, fta_contest_date, fta_final_order_date. The FTA follow-up inspection is linked via fta_insp_nr to the inspection activity number (exact government key). When the follow-up inspection is not currently on record in SafetyRecord, the inspection number is shown without a link.

Understanding These Penalties

The maximum penalty for a serious violation in 2025 is $16,550 per violation. For willful violations, the range is $11,823 to $165,514. The current penalty column shows the latest amount on record in OSHA's database for each citation. When the current penalty differs from the initial penalty, OSHA's records show that the amount changed during the enforcement process, but this page does not determine the specific reason for each change. Penalty amounts are set by OSHA and adjusted annually for inflation.

Data Source and Methodology

Data synced daily

Data on this page comes from the U.S. Department of Labor's OSHA enforcement database, accessed via the DOL public data API. Records are updated daily. We strive for accuracy, but errors in data processing or establishment grouping are possible. Penalty amounts reflect the latest penalty amounts on record in the DOL database and may differ from initial assessments or final amounts after informal conference, settlement, or judicial review. Company pages group inspection records by normalized employer name, city, and state as reported in OSHA records. That grouping is deterministic and non-fuzzy, but it is not a universal legal-entity identifier. On inspection pages, the status display follows the DOL inspection record first. If the DOL inspection feed includes a close date, we show the inspection as closed. If the inspection feed has no close date but all citation records tied to that inspection show a final order date, we label the page "Final Order Recorded" and disclose the citation dates instead of inferring a close date. Chemical exposure sampling data and OSHA Permissible Exposure Limits (PELs) are sourced from the OSHA Occupational Chemical Database, matched via IMIS analyte codes. If you believe any record is inaccurate, please report it and we will investigate. This product uses the DOL Data API but is not endorsed or certified by the DOL. For official and authoritative records, visit osha.gov.